• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.516-521
• /
• 2002

A study was carried out to grow an understanding of the microstructural development of friction stir welds on an AZ91D magnesium alloy, and to evaluate the mechanical properties of the welds. AZ91D plates with the thickness of 4mm were used, and the microstructural development of the weld zone was investigated using optical and scanning electron microscopes. Square butt welding joint with good quality was obtained at the conditions of under 187mm/min of travel speed with 1100 to 1250 rpm of tool rotation speed. The microstructure within the weld region consisted of fine equiaxed grains with no evidence of the original dendritic structure. The hardness tests showed slightly increased harness in the weld region, and the minimum hardness measured is in that of the parent material. Tensile strength of the weld zone was remarkably improved due to very fine recrystallized structure. XRD pattern of weld zone revealed the removal of $\beta$ intermetallic compounds, $Mg_{17}$Al$_{12}$, which had been distributed in the base metal.l.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2057-2064
• /
• 2014

Thermochemical sulfate reduction (TSR) was conducted in autoclave on the system of crude oil and $MgSO_4$ at different temperatures. Gas chromatography pulsed flame photometric detector (GC-PFPD) was used to detected the composition of organic sulfur compounds in oil phase products. The results of the analysis indicate that with increased temperature, the contents of organic sulfur compounds with high molecular weight and thermal stability, such as benzothiophenes and dibenzothiophenes, gradually became dominated. In order to gain greater insight into the formation and distribution of organic sulphur compounds from TSR, positive ion electrospray Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used in detecting the detailed elemental composition and distribution of them. The mass spectra showed that the mass range of sulfur compounds was 200-550 Da. Four sulfur class species, $S_1$, $N_1S_1$, $O_1S_1$ and $O_2S_1$, were assigned in the positive-ion spectrum. Among the identified sulfur compounds, the $S_1$ class species was dominant. The most abundant $S_1$ class species increase associated with the DBE value and carbon number increasing which also indicates the evolution of organic sulfur compounds in TSR is from the labile series to the stable one. In pure blank pyrolysis experiments with crude oil cracking without TSR, different composition and distribution of organic sulfur compounds in oil phase products were seen from mass spectra in order to evaluate their pyrolysis behaviors without $MgSO_4$. FT-IR and XRD were used in analyzing the products of solid phases. Two distinct crystallographic phases MgO and $MgSO_4$ are found to coexist in the products which demonstrated the transformation of inorganic sulfur compounds into organosulfur compounds exist in TSR.

• 한국재료학회지
• /
• 제26권7호
• /
• pp.359-362
• /
• 2016

Mineral filler is used for resin compounds, because it increases the stiffness and thermal stability of a resin compound, and it also cuts down the cost. Calcium carbonate, silica, magnesium oxide, and others are used as filler materials in general, and the type of filler material, the size, and content can affect the physical properties of compounds. Those factors also influence the viscosity of resin mixtures and the workability, and should be adjusted by changing the contents of the filler, which depends on the size. In this study, five kinds of ground calcium carbonate, which were different in size, were used to produce polyester compounds ; the physical properties were compared with the filler size and contents. The mechanical properties were measured by bending strength and tensile strength, and the heat deflection temperature was obtained for thermal stability.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.377-377
• /
• 2006

Alkoxyamine and thiocarbonyl thio end capped polyethylene (PE) chains were synthesized using a direct and simple approach consisting in reacting di(polyethylenyl)magnesium (PE-Mg-PE) chains with a range of nitroxides and disulfides of thiocarbonyl thio compounds. PE-Mg-PE compounds were prepared by a catalyzed chain growth reaction of ethylene on nbutyloctylmagnesium (BOMg) with a neodymocene complex $(C_{5}Me_{5})_{2}NdCl_{2}Li(OEt_{2})_{2}$. Complete characterizations confirm the introduction of the desired end groups. The controlled radical polymerization (NMP and RAFT) of butyl acrylate mediated by these functional polyethylenes was successful.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.40-45
• /
• 2020

In this study, the mechanical and flame-retardant properties of ethylene-propylene-diene-termonomer (EPDM) based rubber compounds and various other environmentally friendly inorganic flame retardants were investigated. Alumina trihydrate (ATH) and magnesium hydroxide (MDH) were used as inorganic flame retardants. The mechanical properties after thermal oxidation aging and the flame-retardant properties of the EPDM compounds were measured using a moving die rheometer, a universal testing machine, a compression set, and a UL 94 V flammability test. We focused on how the properties were affected by the type and amount of flame retardants. The results demonstrated that the optimal mechanical and flame-retardant V-0 grade properties were obtained at an ATH content of 200 phr.

• 공업화학
• /
• 제21권1호
• /
• pp.104-110
• /
• 2010

국내에서 가동 중인 석탄, 오리멀젼, LNG 등의 화력발전소에서 선택적 촉매 환원(SCR) 공정에 사용되고 있는 촉매의 재생을 연구하기 위하여 이들 촉매의 활성 저하를 고찰하였다. XRD, ICP-AES, BET, SEM 분석 등으로 촉매의 특성분석을 수행하였고 이들 촉매에 대하여 암모니아 SCR을 행하였다. 석탄 화력발전소의 SCR 촉매는 연료 성분과 관련된 황산염과 분진의 침적에 의한 기공 폐색에 기인하여 활성저하가 발생하였다. 오리멀젼 화력발전소의 SCR 촉매는 연료에 함유된 바나듐과 황 성분 그리고 연료에 첨가된 마그네슘 화합물의 침적에 의한 기공 폐색에 기인하여 촉매 표면적이 크게 감소하였다. 그러나 촉매의 암모니아 SCR 활성은 약간 감소하였다. LNG 화력발전소의 SCR 촉매는 사용 기간이 2년 이상임에도 불구하고 활성저하는 거의 일어나지 않았다.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.455-463
• /
• 2011

The average sulfur content of crude oil is 2.2%. Coal is about 0.3 to 4.0 percent of the sulfur gases or particles being discharged into the atmosphere through the chimney as 1 to 2% $SO_3$(Sulfur trioxide) and about 95% of the $SO_2$ is reported. $SO_3$ gas, which has many different causes of, as the combustion of sulfur containing fuel during the air due to the excess $SO_2$ gas is oxidized to $SO_3$ gas. Sulfur trioxide emitted from high sulfur heavy oil fired boiler caused white plume in stack and high temperature and cold end corrosion of facilities. So, in order to control sulfur trioxide concentration of Fuel gas in boiler, various of additives are used in other foreign. They are injected to Fuel Oil and consumed in boiler and reduce ash and the conversion rate of sulfur trioxide. In domestic, MgO compounds are used as additives but the total volume of them are made from other foreign company. In this study, MgO compounds were developed with liquid MgO compounds and field application was accomplished. The effect of newly developed chemicals and process were nearly equal to foreign products. In Consequent, the chemicals and process produced by newly developed technology can be substituted for foreign products and reduce the cost of plant operation.

• Corrosion Science and Technology
• /
• 제15권3호
• /
• pp.120-124
• /
• 2016

The effect of alloying element Ca (0, 1, and 2 wt%) on corrosion resistance and bioactivity of the as-received and anodized surface of rolled plate AM60 alloys was investigated. A plasma electrolytic oxidation (PEO) was carried out to form anodic oxide film in $0.5mol\;dm^{-3}\;Na_3PO_4$ solution. The corrosion behavior was studied by polarization measurements while the in vitro bioactivity was tested by soaking the specimens in Simulated Body Fluid (1.5xSBF). Optical micrograph and elemental analysis of the substrate surfaces indicated that the number of intermetallic particles increased with Ca content in the alloys owing to the formation of a new phase $Al_2Ca$. The corrosion resistance of AM60 specimens improved only slightly by alloying with 2 wt% Ca which was attributed to the reticular distribution of $Al_2Ca$ phase existed in the alloy that might became barrier for corrosion propagation across grain boundaries. Corrosion resistance of the three alloys was significantly improved by coating the substrates with anodic oxide film formed by PEO. The film mainly composed of magnesium phosphate with thickness in the range $30-40{\mu}m$. The heat resistant phase of $Al_2Ca$ was believed to retard the plasma discharge during anodization and, hence, decreased the film thickness of Ca-containing alloys. The highest apatite forming ability in 1.5xSBF was observed for AM60-1Ca specimens (both substrate and anodized) that exhibited more degradation than the other two alloys as indicated by surface observation. The increase of surface roughness and the degree of supersaturation of 1.5xSBF due to dissolution of Mg ions from the substrate surface or the release of film compounds from the anodized surface are important factors to enhance deposition of Ca-P compound on the specimen surfaces.

• 대한화학회지
• /
• 제9권1호
• /
• pp.61-65
• /
• 1965

有機클로로酸, 또는 에스타와 各種金屬(亞鉛, 硅素, 마그네슘, 錫)과의 여러 溶媒存在下(아세트나이트라일, 디옥센 및 토루엔)의 反應에서 얻은 反應生成物, 또는 反應系中의 金屬分布狀態를 (n,${\gamma}$)反應으로 製造한 各種放射性 金屬트레이서를 使用하여 決定하였다. 有機클로로 金屬 콤푸렉스의 溶解度는 親水性溶媒에서는 顯著하게 增加하였으며, 無極性溶媒에는 減少하였다. 이 事實은 回收된 金屬, 또는 回收된 金屬混合物의 水洗液中의 金屬分布狀態의 增加로서 確認되었다. 카보닐化合物 存在下에서 反應시켰 때에도 같은 事實을 나타내었다. 親水性溶媒中의 金屬콤푸렉스의 溶解度는 亞鉛, 硅素, 錫 및 마그네슘이 順序로 減少되었으며 無極性溶媒下에서는 硅素, 錫, 마그네슘 및 亞鉛의 順으로 減少되었다. 有機할로겐化合物과 金屬과의 反應生成物로 普通 豫期되는 有機金屬化合物은 全反應을 通하여 거의 없었다. 反應結果를 論議하였으며, 本反應過程에서 觀察한 溶媒의 影響에 關하여 論及하였다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.755-760
• /
• 2019

Compound samples based on the mineral-like magnesium potassium phosphate matrix $MgKPO_4{\times}6H_2O$ were synthesized by solidification of high level waste surrogate. Phase composition and structure of synthesized samples were studied by XRD and SEM methods. Compressive strength of the compounds is $12{\pm}3MPa$. Coefficient of thermal expansion of the samples in the range $250-550^{\circ}C$ is $(11.6{\pm}0.3){\times}10^{-6}1/^{\circ}C$, and coefficient of thermal conductivity in the range $20-500^{\circ}C$ is $0.5W/(m{\times}K)$. Differential leaching rate of elements from the compound, $g/(cm^2{\times}day)$: $Mg-6.7{\times}10^{-6}$, $K-3.0{\times}10^{-4}$, $P-1.2{\times}10^{-4}$, $^{137}Cs-4.6{\times}10^{-7}$; $^{90}Sr-9.6{\times}10^{-7}$; $^{239}Pu-3.7{\times}10^{-9}$, $^{241}Am-9.6{\times}10^{-10}$. Leaching mechanism of radionuclides from the samples at the first 1-2 weeks of the leaching test is determined by dissolution ($^{137}Cs$), wash off ($^{90}Sr$) or diffusion ($^{239}Pu$ and $^{241}Am$) from the compound surface, and when the tests continue to 90-91 days - by surface layer depletion of compound. Since the composition and physico-chemical properties of the compound after irradiation with an electron beam (absorbed dose of 1 MGy) are constant the radiation resistance of compound was established.