• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.137-145
• /
• 2011

This study is proposed to develop a numerical interaction model of the magnetically levitated(maglev) train and guideway. For this purpose, equation of motion for 6-DOF vehicle model, EMS, guideway and guideway irregularity are derived as the state-space equation. In order to solve the state space equations, the present work was performed via matlab simulation using Runge-Kutta method. Through the simulation, the effect of dynamic response of maglev system to different vehicle speeds, guideway rigidity(EI) and masses is investigated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.519-534
• /
• 2008

The Maglev travels at levitated status from the rail in some gab (about $8\sim10mm$). it make difference with the existing subway or the another LRV. The detection method of the train speed and the train position to be used at Maglev's signaling system differ with the existing subway or the another LRV's. so, the signal system construction of the new method is necessary. This paper describes the configuration and characteristic of the total signaling system (TTC/Wayside/Cab/Guide way system etc.) developed for Maglev, and the design concept of the signaling system based on the latest wireless LAN communication for driverless operation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.830-837
• /
• 2010

Since it started the researches on a maglev train on 1960, Germany and Japan arrived to putting to practical use level and accomplished most tests from their test-line. Korea is in progress the preparation for a practical use of low-speed maglev train in 110 [km/h] class and Korea Railroad Research Institute(KRRI) is in progress of a research about core technology of maglev system for high-speed tube train of 700 [km/h] class. In this paper, authors suggest an effective design method of Linear Synchronous Motor(LSM) for high-speed tube train of 700 [km/h] class which has a wound type electro-magnet. Then, authors calculate a variety of properties by changing speed of the LSM model which is designed by a method based on some theoretical equations. Then, authors verify the validity of the method based on some theoretical equations through a verification of property values by Finite Element Method(FEM) analysis method. Finally, in order to design a shape of pole-shoe part of LSM electro-magnet which is hard to design with a basic design method, authors analyze a transition of property values by changing a pole-shoe width and current of the electro-magnet through an analytical method by FEM.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1454-1460
• /
• 2009

Ultra-speed tube train, which runs in vacuum atmosphere to overcome aero-dynamic dragging force, is considered as a high-speed ground transportation system to back up long-distance air travel. To realize the ultra-speed tube train, feasibility study of currently available Maglev technologies especially for propulsion and levitation system is needed. Propulsion by linear synchronous motor(LSM) and levitation by electro-dynamic suspension(EDS) which are utilized in the Japan's MLX system could be one of candidated technologies for ultra-speed tube train. In the LSM-EDS system, the key component is superconducting magnet, and its reliability and performance is very important to guarantee the safe-operation of Maglev. As the initiative of the feasibility study, this paper deals with the basic structure of superconducting magnet and core technologies to design and operate it. And by surveying the current R&D achievement in Korea, the nation's capability to develop advanced superconducting magnet for Maglev is presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.24-30
• /
• 2008

One of the characteristics of the Maglev Train is the prominent capability of upgoing. Maglev train with the aim of longitudinal slope 7/100 is under development by the Center for Urban Maglev Program in Korea. To realize these slope, vertical curves must be inserted before and after the slope. The inserted curve has the radius of 3,000m generally. The insertion of these vertical curve results in the additional differences between the girder upper face and the guide rail, and the alignments are controlled by cast in place concrete at present. In this study, for longitudinal curved route with longitudinal slope 6/100, the applicability of PSC-U type girder and precast deck was evaluated for the span length 25m, 30m and vertical curve radii with 3,000m and 1,500m with respect to longitudinal slope 6/100.

• 한국철도학회논문집
• /
• 제20권1호
• /
• pp.111-119
• /
• 2017

이 연구에서는 자기부상열차-가이드웨이 상호작용을 고려하여 자기부상철도 가이드웨이 구조물의 진동사용성을 고려한 처짐한계를 제안한다. 간략화된 자기부상철도 시스템의 운동방정식을 유도하고, 자기부상력 제어를 위한 되먹임 상수가 부상공극의 변동량이 최소가 되도록 최적화한다. 이 시스템에 대하여 자기부상열차의 운행속도, 가이드웨이 경간장, 2차 현가장치의 고유진동수와 감쇠비를 변화시켜 가며, 부상공극의 크기와 차체의 연직가속도에 대한 사용성 기준을 만족하는 가이드웨이의 처짐한계를 조사한다. 해석 결과로부터 자기부상열차의 2차 현가장치에 대한 요구 조건과 가이드웨이 구조물이 만족시켜야 하는 처짐한계를 제안한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.93-97
• /
• 2011

This paper presents the performance and test results of propulsion system which is met the requirements of urban MAGLEV. The design of propulsion system should be considered the effect of attractive force by the magnetic levitation and train running resistance. In this paper, the tractive and braking thrust are calculated and the train performance is simulated for the service track. Finally the test results of complete car are shown to verify the performance.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.119-125
• /
• 2016

본 논문에서는 기존 휠-레일 고속열차에 자기부상열차의 추진방법을 적용한 하이브리드 방식의 고속열차의 주행 동특성에 대해서 연구하였다. 초전도 선형동기전동기를 추진 동력으로 하는 휠-레일 방식의 고속열차는 강력한 추진력을 지니면서도 자기부상열차에 비해 기존 선로와의 호환성 및 경제성 측면에서 유리할 것으로 예상된다. 본 논문에서는 초전도 선형동기전동기를 기존의 휠-레일 고속철도에 적용하는 두 가지 방안에 대해서, 초전도 선형동기전동기 추진이 휠-레일 고속열차의 동특성에 미치는 영향을 살펴보기 위하여 초전도 선형동기전동기의 회전자와 고정자의 상호 작용을 검토하고 이를 포함한 차량의 동특성 모델을 구축하였다. 구축된 모델을 이용한 시뮬레이션을 통해 초전도 선형동기전동기의 회전자와 고정자의 상호 작용이 주행 중 고속 안정성, 승차감 및 가이드웨이 불규칙도에 미는 영향을 분석하였다.

• International Journal of Railway
• /
• 제9권2호
• /
• pp.41-45
• /
• 2016

In this paper, a study on the efficiency improvement of the magnetic levitation train using the LIM (Linear Induction Motor) was presented. The maglev train has the advantage of being environmentally friendly since much less noise and dust is produced. However, due to structural limitation, compared to a rotating induction motor, linear induction motor, the main propulsion engine of the maglev train has a relatively greater air gap and hence has the lower operation efficiency. In this paper, the relationship between the operating condition of the train and the slip frequency has been investigated to find out the optimum slip frequency that might improve the efficiency of the magnetic levitation train with linear induction motor. The slip frequency is variable during the operation by this relationship only within a range that does not affect the levitation system of the train. After that, the comparison of the efficiency between the conventional control method with the slip frequency fixed at 13.5[Hz] and the proposed method with the slip frequency variable from 9.5[Hz] to 6.5[Hz] has been conducted by simulation using Simplorer. Experiments of 19.5[ton] magnetic levitation trains owned by Korea Institute of Machinery and Materials were carried out to verify the simulation results.

• 한국CDE학회논문집
• /
• 제21권4호
• /
• pp.409-416
• /
• 2016

This study aims to investigate dynamic interaction characteristics between Maglev train and 3 span continuous guideway. The integrated model including a 3D full vehicle model based on multibody dynamics, flexible guideway by a modal superposition method, and levitation electromagnets with the feedback controller is proposed. The proposed model was applied to the Incheon Airport Maglev Railway to analyze the dynamic response of the vehicle and guideway from the numerical simulation. Using field test data of air gap and guideway deflections, obtained from the Incheon Airport Maglev Railway, the analysis method is verified. From the results, it is confirmed that Maglev railway system are designed and constructed safely according to the design criteria.