• Structural Engineering and Mechanics
• /
• v.77 no.2
• /
• pp.273-291
• /
• 2021

The strut-and-tie method (STM) has been widely accepted and used as a rational approach for the design of disturbed regions ('D' regions) of reinforced concrete members such as in corbels and deep beams, where traditional flexure theory does not apply. This paper evaluates the applicability of the equilibrium based STM in strength predictions of deep beams (with rectangular and circular cross-section) and corbels using the available experiments in literature. STM is found to give fairly good results for corbel and deep beams. The failure modes of these deep members are also studied, and an optimum amount of distribution reinforcement is suggested to eliminate the premature diagonal splitting failure. A comparison with existing empirical and semi empirical methods also show that STM gives more reliable results. The nonlinear finite element analysis (NLFEA) of 50 deep beams and 20 corbels could capture the complete behaviour of deep members including crack pattern, failure load and failure load accurately.

• Earthquakes and Structures
• /
• v.20 no.3
• /
• pp.239-260
• /
• 2021

Torsional response of buildings is attributed to poor structural configurations in plan, which arises due to two factors - torsional eccentricity and torsional flexibility. Usually, building codes address effects due to the former. This study examines both of these effects. Buildings with torsional eccentricity (e.g., those with large eccentricity) and with torsional flexibility (those with torsional mode as a fundamental mode) demand large deformations of vertical elements resisting lateral loads, especially those along the building perimeter in plan. Lateral-torsional responses are studied of unsymmetrical buildings through elastic and inelastic analyses using idealised single-storey building models (with two degrees of freedom). Displacement demands on vertical elements distributed in plan are non-uniform and sensitive to characteristics of both structure and earthquake ground motion. Limits are proposed to mitigate lateral-torsional effects, which guides in proportioning vertical elements and restricts amplification of lateral displacement in them and to avoid torsional mode as the first mode. Nonlinear static and dynamic analyses of multi-storey buildings are used to validate the limits proposed.

• Asian Journal of Innovation and Policy
• /
• v.11 no.3
• /
• pp.277-292
• /
• 2022

This study examines the implications on the valuations of privately held firms when stakes are acquired by venture capitalists in India. In addition, the effect of fund size and revenue multiple is considered as a determinant of firm value. The study is based on a sample of 1229 rounds of funding during the period 2007-2015. The data was obtained from Venture Intelligence. Three major observations emerged based on an OLS regression. Firstly, it is observed that the stake acquired by venture capitalists has a negative effect on firm value. It supports the belief that when a firm reaches its maximum valuation from the promoter's perspective, there is a tendency to liquidate additional stakes. Secondly, a positive association between the revenue multiple and valuation is recognized. Thirdly, the convex relationship (U-shaped) between the fund size and firm valuations as seen in the case of developed economies, appears to be non-existent in India.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.744-747
• /
• 2005

The AEC (Architecture/Engineering/Construction) industry is facing a competitive world after it entered into the 21^st century. Due to improper planning and scheduling, the construction projects face severe delays in completion. Most of the present day construction organisations operate in multiple project environments where more than one projects are to be managed simultaneously. But the advantages of planning and scheduling as multiple projects have not been utilized by these organisations. Change in multi-project planning and scheduling is inevitable and often frequent, therefore the traditional planning and scheduling approaches are no more feasible in scheduling multiple construction projects. The traditional scheduling tools like CPM and PERT do not offer any help in scheduling in a resource-constrained environment. This necessitated a detailed study to model the environment realistically and to make the allocation of limited resources flexible and efficient. This paper delineates about the proactive model which will help the project managers for scheduling the multiple construction projects.

• Ocean Systems Engineering
• /
• v.13 no.3
• /
• pp.269-286
• /
• 2023

Autonomous Underwater Gliders (AUGs) are a type of Underwater Vehicles that move without the help of a standard propeller. Gliders use buoyancy engines to vary their weight or buoyancy and traverse with the help of the Lift and Drag forces developed from the fuselage and the wings. The Lift and Drag Coefficients, also called Hydrodynamic coefficients (HDCs) play a major role in glider dynamics. This paper examines the effect of the different types of glider fuselages based on the bodies of revolution (BOR) of NACA sections. The HDCs of the glider fuselages are numerically estimated at a low-speed regime (10⁵ Reynolds Number) using Computational Fluid Dynamics (CFD). The methodology is validated using published literature, and the results of CFD are discussed for possible application in the estimation of glider turning motion.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.201-208
• /
• 2011

Today's highly competitive construction scenario forces all the major players in the field to take up multiple projects which have put an undue pressure on the resources available within the organization. Under such a situation, there are many instances where in the resource requirement exceeds its availability due to multiple activities (with same resource requirement) which are scheduled to start simultaneously and thus results in the constrained resource becoming a bottleneck of the project. As a consequence of sharing resources, this paper studies the impact on the completion date of two similar projects under two different conditions, the first one resulting in a postponed end date and the second without any postponement. The resource utilization, the possibility of substitution of a resource and its subsequent impact on the deadline of the project is analyzed under these two circumstances. The study is done on a Critical Chain Project Management (CCPM) platform instead of leaving the schedule with a traditional Critical Path Method (CPM) finish, which gives an added advantage of validating the robustness of the emerging CCPM trend in the field of resource management.

• Journal of applied mathematics & informatics
• /
• v.42 no.1
• /
• pp.123-137
• /
• 2024

In this paper, Power fuzzy graphs is newly introduced by allotting fuzzy values on power graphs in such a way that the newly added edges, has the edge membership values between a closed interval which depends on vertex membership values and the length of the added edges. Power fuzzy subgraphs and total power fuzzy graphs are newly defined with properties and some special cases. It is observed that every power fuzzy graph is a fuzzy graph but the converse need not be true. Edges that are incident to vertices with the least vertex membership values are retained in the least power fuzzy subgraph. Further, the application of these concepts in real life time has been presented and discussed using power fuzzy graph model.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.627-636
• /
• 2011

A commercially important alkaline protease, produced by Bacillus sp. RRM1 isolated from the red seaweed Kappaphycus alvarezii (Doty) Doty ex Silva, was first recognized and characterized in the present study. Identification of the isolated bacterium was done using both biochemical characterization as well as 16S rRNA gene sequencing. The bacterial strain, Bacillus sp. RRM1, produced a high level of protease using easily available, inexpensive agricultural residues solid-state fermentation (SSF). Among them, wheat bran was found to be the best substrate. Influences of process parameters such as moistening agents, moisture level, temperature, inoculum concentration, and co-carbon and co-nitrogen sources on the fermentation were also evaluated. Under optimized conditions, maximum protease production (i.e., 2081 U/g) was obtained from wheat bran, which is about 2-fold greater than the initial conditions. The protease enzyme was stable over a temperature range of 30-$60^{\circ}C$ and pH 6-12, with maximum activity at $50^{\circ}C$ and pH 9.0. Whereas the metal ions $Na^+$, $Ca^{2+}$, and $K^+$ enhanced the activity of the enzyme, others such as $Hg^{2+}$, $Cu^{2+}$, $Fe^{2+}$, $Co^{2+}$, and $Zn^{2+}$ had rendered negative effects. The activity of the enzyme was inhibited by EDTA and enhanced by $Cu^{2+}$ ions, thus indicating the nature of the enzyme as a metalloprotease. The enzyme showed extreme stability and activity even in the presence of detergents, surfactants, and organic solvents. Moreover, the present findings opened new vistas in the utilization of wheat bran, a cheap, abundantly available, and effective waste as a substrate for SSF.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.292-302
• /
• 2018

This article examines how India's major colonial cities-Madras, Calcutta, Bombay (today, Chennai, Kolkata, Mumbai) and New Delhi- are described in India's history textbooks and analyzed them from the perspective of Indians. It is explained the major colonial cities as the process of making the cities and their political, social, economic and cultural changes, the separation between British and Indian, urban planning, colonial architectures built by British colonial power in Indian history textbooks. The viewpoint of its descriptions is featured by the coexistence of 'deprivation, exclusion, discrimination, resistance, challenge' and 'grant of opportunity, acceptation, absorption'. That is, this characteristic maintains a mutual confrontational and inseparable relation. And in a multi-layer, it enables to consider the inherent characteristics of a colonial city reflecting the British ruling ideology and the society within which the rulers and proprietors are forming without simplifying the cultural characteristics. It is clear that there was a resistance against the unreasonable discrimination and exclusion that had been suffered by the British colonial government as well.

• International Journal of Fluid Machinery and Systems
• /
• v.5 no.2
• /
• pp.65-71
• /
• 2012

The objective of the present investigation is to explore the possibility of improving the performance of a centrifugal fan at low Reynolds numbers using a simple passive means, namely Gurney flap (GF). GFs of 1/$8^{th}$ inch brass angle (3.175 mm) corresponding to 15.9% of blade exit height or 5.1% of blade spacing at the impeller tip are attached to the impeller blade tip on the pressure surface. Performance tests are carried out on the centrifugal fan with vaneless diffuser at five Reynolds numbers (viz., 0.30, 0.41, 0.55, 0.69, $0.82{\times}10^5$, i.e., at five speeds respectively at 1,100, 1,500, 2,000, 2,500 and 3,000 rpm) without and with GF. Static pressures on the vaneless diffuser hub and shroud are also measured for each speed at four flow coefficients [${\phi}$=0.23 (below design flow coefficient), ${\phi}$=0.34 (design flow coefficient), ${\phi}$=0.45 (above design flow coefficient) and ${\phi}$=0.60 (above design flow coefficient)] with and without GF. From the performance curves it is found that the performance of the fan improves considerably with GFs at lower Reynolds numbers and improves marginally at higher Reynolds number. Similar improvements are observed for the static pressures on the diffuser hub and shroud. The effect of Reynolds number on the performance and static pressures is considerable. However the effect is reduced with GFs.