• Journal of Construction Engineering and Project Management
• /
• 제2권1호
• /
• pp.35-44
• /
• 2012

In the last two decades, several tele-operated and machine-vision-assisted systems have been developed in the construction and maintenance area, such as pavement crack sealing, sewer pipe rehabilitation, and excavation. In developing such tele-operated and machine-vision-assisted systems, trajectory plans are very important tasks for the optimal motions of robots whether their environments are structured or unstructured. This paper presents an optimal trajectory planning algorithm used for a machine-vision-assisted automatic pavement crack sealing system. In this paper, the performance of the proposed optimal trajectory planning algorithm is compared with the greedy trajectory plans, which are used in the previously developed pavement crack sealing systems. The comparison is based on the computational cost vs. the overall gains in crack sealing efficiency. Finally, it is concluded that the proposed algorithm plays an important role in the productivity improvement of the developed automatic pavement crack sealing system.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.177-185
• /
• 2001

This paper describes a machine-vision-based prototype system for automatically feeding engine-mount parts to a swaging machine which assembles engine mounts. The system developed consists of a robot, a feeding device with two cylinders and two photo sensors, and a machine vision system. The machine vision system recognizes the type of different parts being fed from the feeding device and estimates the angular difference between the inner-hole center of the part and the point predetermined for assembling. The robot then picks up each part and rotated it through the estimated angle such that the parts are well assembled together as specified. An algorithm has been developed to recognize different part types and estimate the angular difference. The test results obtained for a set of real specimens indicate that the algorithm performs well enough to be applied to prototype system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.661-665
• /
• 2000

In this study, the control of mounting system for MLGA package was developed using machine vision for the control of rotating position compensation and mounting position of X-Y table. Two type of material (polymer, alumina )were used for the dielectric insulator of the MLGA. And the illumination system and the algorithm of position compensation that be suitable for these materials was developed. Also, the position control order that compensated by machine vision actuated to micro stepping motor and X-Y servo motor by controlled PC and mounted the MLGA on PCB in resolution to$\pm10\mum$ .

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1558-1563
• /
• 2010

본 논문에서는 생산 현장에서 작업자가 육안으로 하고 있는 자동차 부품의 전수(全數) 검사 방법을 대체하기 위한 머신 비전 시스템의 개발을 위한 검사알고리즘에 관한 연구이다. 생산 효율과 품질 향상을 위한 노력의 일환으로 플라스틱 압출 성형에서 생기는 여러 가지 불량품 유형을 PC를 기반한 머신 비전 시스템(Machine Vision System)을 구축하기에 앞서 생산된 부품을 실시간 검사하고 제품의 불량 유무를 판별하는 알고리즘을 개발하는 것이 본 연구의 목적이다. 검사방법에 사용된 소프트웨어는 NI-LabVIEW를 사용하였으며, LabVIEW Vision 이미지 함수를 사용하여 검사 프로그램을 개발하였다. 개발된 검사 알고리즘은 생산 부품의 실시간 검사에 적용 될 수 있으며, 검사 영역과 설정 값을 비전 시스템 운용자가 설정할 수 있도록 프로그램이 만들어져 검증되었다.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.184-191
• /
• 2004

In this study, an inspection system for automotive parts using machine vision has been developed and presented. The system is comprised of six analog CCD cameras, frame grabber, and mechanism that loads the automotive parts to the system for the inspection. An Image processing algorithm for detecting eight different types of defects of oil-seals are developed, and the effectiveness of the algorithm is experimentally verified. Inspection process is completed in 1 second with acceptable accuracy. It is envisaged that this inspection system will have a wide application in the automotive part manufacturing industry in the future.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.85-96
• /
• 2000

An Eggcrate assembly is an important part to hold and support 16,000 tubes containing hot and contaminated water in the steam generator of nuclear power plant. As a great number of tubes should be inserted into the eggcrate assembly, the dimensions of each eggcrate grid are one of the critical factors to determine the availability of tube insertion. in this paper. we propose a machine vision algorithm for measuring the inner-circle diameter of each eggcrate grid whose shape is not exact quadrangular. The overall procedure of the algorithm is composed of camera calibration, eggcrate image preprocessing, grid height adjustment, and inner-circle diameter estimation. The algorithm is tested on real specimens and the results show that the algorithm works fairly well.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.795-801
• /
• 1998

In this paper, we propose a machine vision algorithm for inspecting inserts which are used for milling and turning operations. Major defects of the inserts are breakage and crack on insert surfaces. Among the defects, breakages on the face of the inserts can be detected through three stages of the algorithm developed in this paper. In the first stage, a multi-layer perceptron is used to recognize the inserts being inspected. Edge detection of the insert image is performed in the second stage. Finally, in the third stage breakages on the insert face are identified using Hough transform. The overall algorithm is tested on real specimens and the results show that the algorithm works fairly well.

• Journal of Platform Technology
• /
• 제10권3호
• /
• pp.21-29
• /
• 2022

Recently, the scope of the smart factory has been expanded, and process research to minimize the part that requires manpower in many processes is increasing. In the case of detecting defects in the appearance of small products, precise verification using a vision system is required. Reliability and speed of inspection are inefficient for human inspection. In this paper, we propose an algorithm for inspecting product appearance defects using a machine vision system. In the case of the remote control targeted in this paper, the appearance is different for each product. Due to the characteristics of the remote control product, the data obtained using two cameras is compared with the master data after denoising and stitching steps are completed. When the algorithm presented in this paper is used, it is possible to detect defects in a shorter time and more accurately compared to the existing human inspection.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.105-114
• /
• 2003

In this study, a dicing machine with vision system was built and an algorithm for automatic alignment was developed for dual camera system. The system had a macro and a micro inspection tool. The algorithm was formulated from geometric relations. When a wafer was put on the cutting stage within certain range, it was inspected by vision system and compared with a standard pattern. The difference between the patterns was analyzed and evaluated. Then, the stage was moved by x, y, $\theta$ axes to compensate these differences. The amount of compensation was calculated from the result of the vision inspection through the automatic alignment algorithm. The stage was moved to the compensated position and was inspected by vision for checking its result again. Accuracy and validity of the algorithm was discussed from these data.

• 한국산업정보학회논문지
• /
• 제19권4호
• /
• pp.41-52
• /
• 2014

본 논문은 O링의 치수 측정에 있어 고가의 대 중형 머신비전 장비를 대체할 수 있는 소형 머신 비전 검사 장비에 기반한 O링 부품 내 외경 측정 알고리즘을 제안한다. 백라이트 조명하에 하나의 CCD 카메라를 이용하여 측정 평면으로 부터 영상을 획득하는 소형 머신 비전 검사장비에 의해 획득된 영상을 제안한 영상처리 기법 알고리즘을 이용하여 O링의 외경 및 내경치수를 측정한다. 치수 측정의 정확도를 높이기 위해 렌즈계 왜곡 보정과 원근 왜곡 보정을 소프트웨어적 기법으로 보정 하였고 O링 형상을 고려하여 타원정합 모델을 적용하였으며 보다 타원 정합의 신뢰성을 높이기 위해 RANSAC알고리즘을 적용하였다.