• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.101-105
• /
• 2004

The traction drive have a high power transmission efficiency and small size, a light weight, a low noise. So it is expected that alternative drive part of engine. Because it is necessary stillness that essential condition of drive part used moving tool in a room, it has many-sided in field of application. This traction drive is better suitable than other speed reducer as drive part of electric wheelchair. Also it is sufficiently necessary capacity of existing advanced product as apply traction drive to electric wheelchair.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.1-13
• /
• 1991

This paper describes two FMS, which were developed by SAEIL Heavy Industries. One is FMS for machining of circular parts, that are automobile's axle shafts. This system consists of 13 units, including 7 CNC machine tools. The other is FMS for machining of non-circular parts namely casted or steel block within size of 1.2 X 1.2 X 1.5m. This FMS consists of 8-machining centers, 1-automated warehouse, 2-unmanned Robo Trailers, and computer control room. All systems are functioning satisfactorily and so help greately towards automation of Korean industries.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.1
• /
• pp.95-103
• /
• 1998

Many new technologies and developments designed to increase paper machine speeds and improve paper printability have emerged in recent years. These improvements have changed the structure of paper and given winder manufacturers new challenges, especially as the requirements of printing presses have also changed. Ever-increasing roll widths and diameters are needed. Along with faster press speeds and shorter acceleration times, the unwinding of roils in the press room has become a true test of paper strength and roll structure, In the following we will review the special winding features of coated papers and discuss a selection of the winder type to meet a mill's specific needs.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.7-22
• /
• 1991

This paper describes two FMS, which were developed by SAEIL Heavy Industries. One is FMS for machining of circular parts, that are automobile's axle shafts. This system consists of 13units, including 7CNC machine tools. The other is RMS for machining of non- circular parts namely casted or steel block within size of 1.2${\times}$1.2${\times}$1.5m. This FMS consists of 8-machining centers, 1-automated werehouse, 2,-unmanned Robo Trailers, and computer control room. All systems are functioning satisfactorily and so help greately towards automation of Korean industries.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.18-26
• /
• 1991

A study on the measuring and evaluation of LSC(Least Square Center) roundness was carried out. The experimental set-up was made by index head and indicator, and the measuring data were compensated by a developed computer program. The results obtained are as follows : 1) An index head can conveniently be used to measure LSC roundness. 2) A program for calculating LSC roundness is developed. 3) Without a high quality roundnes measuring apparatus, LSC roundness can be measured and calculated by using index head and the developed program in machine shop as well as in a measuring room

• Journal of the Korean Society of Safety
• /
• v.17 no.1
• /
• pp.11-17
• /
• 2002

The purpose of this study was to present the method to choose the optimization machining condition for the wire electric machine. This was completed by examining the ever-changing quality of the material and by improving the function of the wire electric discharge machine. Precision metal mold products and the unmanned wire electric discharge machining system were used and then applied in industrial fields. This experiment uses the wire electric discharge machine with brass wire electrode of 0.25mm. To measure the precision of the machining surface, average values are obtained from 3 samples of measures of center-line average roughness by using a third dimension gauge and a stylus surface roughness gauge. In this experiment, we changed no-node voltage to 7 and 9, pulse-on-time to $6{\mu}s,\;8{\mu}s$ and $10{\mu}s$, pulse-off-time to $8{\mu}s,\;10{\mu}s$ and $13{\mu}s$, and experimented on wire tension at room temperature by 1000gf, 1200gf, and 1400gf, respectively.

• Journal of the Ergonomics Society of Korea
• /
• v.22 no.1
• /
• pp.31-42
• /
• 2003

This study describes a modification of the technique for human error analysis in nuclear power plants (NPPs) which adopts advanced Man-Machine Interface (MMI) features based on computerized working environment, such as LCOs. Flat Panels. Large Wall Board, and computerized procedures. Firstly, the state of the art on human error analysis methods and efforts were briefly reviewed. Human error analysis method applied to NPP design has been THERP and ASEP mainly utilizing Swain's HRA handbook, which has not been facilitated enough to put the varied characteristics of MMI into HRA process. The basic concepts on human errors and the system safety approach were revisited, and adopted the process of FMEA with the new definition of Error Segment (ESJ. A modified human error analysis process was suggested. Then, the suggested method was applied to the failure of manual pump actuation through LCD touch screen in loss of feed water event in order to verify the applicability of the proposed method in practices. The example showed that the method become more facilitated to consider the concerns of the introduction of advanced MMI devices, and to integrate human error analysis process not only into HRA/PRA but also into the MMI and interface design. Finally, the possible extensions and further efforts required to obtain the applicability of the suggested method were discussed.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.237-244
• /
• 2022

Onions are a significant crop in Korea, and cultivation is increasing every year along with high demand. Onions are planted in the fall and mainly harvested in June, the rainy season, therefore, physiological changes in onion bulbs during long-term storage might have happened. Onions are stored in cold room and at adequate relative humidity to avoid quality loss. In this study, bio-yield stress and weight loss were measured as the quality parameters of net packaged onions during 10 weeks of storage, and the storage environmental conditions are monitored using sensor networks systems. Quality estimation of net packaged onion during storage was performed using the storage environmental condition data through machine learning approaches. Among the suggested estimation models, support vector regression method showed the best accuracy for the quality estimation of net packaged onions.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.629-632
• /
• 2020

현대사회는 4차 산업혁명 시대가 도래하면서 초연결, 초지능, 초융합 사회로 변화되고 있다. 최근 교육부는 많은 변화가 요구되고 있는 교육분야, 교육정책 방안으로 SW(소프트웨어)교육에 AI(인공지능) 교육까지 추가되야 한다고 제안하고 2024년까지 첨단 기술을 활용한 지능형 과학실을 구축한다고 밝혔다. 이에 본 논문에서는 정부의 교육정책 방안이 원활하게 진행될 수 있고 융합 교육 분야에서 활용될 수 있는 "미래 지능형 과학실 활용을 위한 화학원소기호 이미지 기계학습 AI·SW교육 프로그램"을 제안하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.389-394
• /
• 2023

In recent years, use of machine automation is rising in the industry. Ships also obtain machine condition information from sensor as digital information. However, on ships, crew members regularly surveil the engine room to check the condition of equipment and their information through analog gauges. This is a time-consuming and tedious process and poses safety risks to the crew while on surveillance. To address this, engine room surveillance using an autonomous mobile robot is being actively explored as a solution because it can reduce time, costs, and the safety risks for crew. Analog gauge reading using an autonomous mobile robot requires digitization for the robot to recognize the gauge value. In this study, image processing techniques were applied to achieve this. Analog gauge images were subjected to image preprocessing to remove noise and highlight their features. The center point, indicator point, minimum value and maximum value of the analog gauge were detected through image processing. Through the straight line connecting these points, the angle from the minimum value to the maximum value and the angle from the minimum value to indicator point were obtained. The obtained angle is digitized as the value currently indicated by the analog gauge through a formula. It was confirmed from the experiments that the digitization of the analog gauge using image processing was successful, indicating the equivalent current value shown by the gauge. When applied to surveillance robots, this algorithm can minimize safety risks and time and opportunity costs of crew members for engine room surveillance.