• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.38-46
• /
• 2020

The accurate measurement of critical heat flux (CHF) in flow boiling is important for the safety requirement of the nuclear power plant to prevent sharp degradation of the convective heat transfer between the surface of the fuel rod cladding and the reactor coolant. In this paper, a System Engineering approach is used to develop a model that predicts the CHF using machine learning. The model is built using artificial neural network (ANN). The model is then trained, tested and validated using pre-existing database for different flow conditions. The Talos library is used to tune the model by optimizing the hyper parameters and selecting the best network architecture. Once developed, the ANN model can predict the CHF based solely on a set of input parameters (pressure, mass flux, quality and hydraulic diameter) without resorting to any physics-based model. It is intended to use the developed model to predict the DNBR under a large break loss of coolant accident (LBLOCA) in APR1400. The System Engineering approach proved very helpful in facilitating the planning and management of the current work both efficiently and effectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2021

For the safe and reliable operation of lithium-ion batteries in electric vehicles or energy storage systems, having accurate information of the battery, such as the state of charge (SOC), is essential. Many different techniques of battery SOC estimation have been developed, such as the Kalman filter. However, when this filter is applied to multiple batteries, it has difficulty maintaining the accuracy of the estimation over all cells owing to the difference in parameter values of each cell. The difference in the parameter of each cell may increase as the operation time accumulates due to aging. In this paper, a novel deep neural network (DNN)-based SOC estimation method for multi-cell application is proposed. In the proposed method, DNN is implemented to determine the nonlinear relationships of the voltage and current at different SOCs and temperatures. In the training, the voltage and current data obtained at different temperatures during charge/discharge cycles are used. After the comprehensive training with the data obtained from the cycle test with a cell, the resulting algorithm is applied to estimate the SOC of other cells. Experimental results show that the mean absolute error of the estimation is 1.213% at 25℃ with the proposed DNN-based SOC estimation method.

• Journal of applied mathematics & informatics
• /
• v.40 no.5_6
• /
• pp.1151-1165
• /
• 2022

Key drive of information quarrying is to digest liked information starting possible information. With the colossal amount of realities kept in documents, information bases, and stores, in the medical care area, it's inexorably significant, assuming excessive, arising compelling resources aimed at examination besides comprehension like information on behalf of the withdrawal of gen that might assistance in independent direction. Classification is method in information mining; it's characterized as per private, passing on item toward a specific course established happening it is likeness toward past instances of different substances trendy the data collection. In pre-owned recycled four Classification algorithm that incorporate Multi-Layer perception, KSTAR, Bayesian Network and PART to fabricate the grouping replicas arranged the malaria data collection and analyze the replicas, degree their exhibition through Waikato Environment for Knowledge Analysis introduced to Java Development Kit 8, then utilizations outfit's technique trendy promoting presentation of the arrangement methodology. The outcome perceived that Bayesian Network return most elevated exactness of 50.05% when working on followed by Multi-Layer perception, with 49.9% when helping is half, then, at that point, Kstar with precision of 49.44%, 49.5% when supporting individually and PART have lesser precision of 48.1% when helping, The exploration recommended that Bayesian Network is awesome toward remain utilized on Malaria data collection in our sanatoriums.

• Korean Journal of Artificial Intelligence
• /
• v.9 no.1
• /
• pp.9-14
• /
• 2021

This paper predicted a model that indicates whether to buy a car based on primary health insurance customer data. Currently, automobiles are being used to land transportation and living, and the scope of use and equipment is expanding. This rapid increase in automobiles has caused automobile insurance to emerge as an essential business target for insurance companies. Therefore, if the car insurance sales are predicted and sold using the information of existing health insurance customers, it can generate continuous profits in the insurance company's operating performance. Therefore, this paper aims to analyze existing customer characteristics and implement a predictive model to activate advertisements for customers interested in such auto insurance. The goal of this study is to maximize the profits of insurance companies by devising communication strategies that can optimize business models and profits for customers. This study was conducted through the Microsoft Azure program, and an automobile insurance purchase prediction model was implemented using Health Insurance Cross-sell Prediction data. The program algorithm uses Two-Class Logistic Regression and Two-Class Boosted Decision Tree at the same time to compare two models and predict and compare the results. According to the results of this study, when the Threshold is 0.3, the AUC is 0.837, and the accuracy is 0.833, which has high accuracy. Therefore, the result was that customers with health insurance could induce a positive reaction to auto insurance purchases.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.622-627
• /
• 2022

This paper proposes an intrusion detection system for in-vehicle network to improve detection performance considering attack counts and attack types. In intrusion detection system, both FNR (False Negative Rate), where intrusion frame is misjudged as normal frame, and FPR (False Positive Rate), where normal frame is misjudged as intrusion frame, seriously affect vechicle safety. This paper proposes a novel intrusion detection algorithm to improve both FNR and FPR, where data frame previously detected as intrusion above certain attack counts is automatically detected as intrusion and the automatic intrusion detection method is adaptively applied according to attack types. From the simulation results, the propsoed method effectively improve both FNR and FPR in DoS(Denial of Service) attack and spoofing attack.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.4
• /
• pp.1209-1223
• /
• 2022

Blood pressure is one of the key physiological parameters for determining human health, and can prove whether human cardiovascular function is healthy or not. In general, what we call blood pressure refers to arterial blood pressure. Blood pressure fluctuates greatly and, due to the influence of various factors, even varies with each heartbeat. Therefore, achievement of continuous blood pressure measurement is particularly important for more accurate diagnosis. It is difficult to achieve long-term continuous blood pressure monitoring with traditional measurement methods due to the continuous wear of measuring instruments. On the other hand, radar technology is not easily affected by environmental factors and is capable of strong penetration. In this study, by using machine learning, tried to develop a linear blood pressure prediction model using data from a public database. The radar sensor evaluates the measured object, obtains the pulse waveform data, calculates the pulse transmission time, and obtains the blood pressure data through linear model regression analysis. Confirm its availability to facilitate follow-up research, such as integrating other sensors, collecting temperature, heartbeat, respiratory pulse and other data, and seeking medical treatment in time in case of abnormalities.

• ETRI Journal
• /
• v.44 no.4
• /
• pp.654-671
• /
• 2022

Accidental falls frequently occur during activities of daily living. Although many studies have proposed various accident detection methods, no high-performance accident detection system is available. In this study, we propose a method for integrating data and accident detection algorithms presented in existing studies, collect new data (from two stunt performers and 15 people over age 60) using a developed wearable device, demonstrate new features and related accident detection algorithms, and analyze the performance of the proposed method against existing methods. Comparative analysis results show that the newly defined features extracted reflect more important risk factors than those used in existing studies. Further, although the traditional algorithms applied to integrated data achieved an accuracy (AC) of 79.5% and a false positive rate (FPR) of 19.4%, the proposed accident detection algorithms achieved 97.8% AC and 2.9% FPR. The high AC and low FPR for accidental falls indicate that the proposed method exhibits a considerable advancement toward developing a commercial accident detection system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.130-130
• /
• 2023

제트류는 다양한 크기와 운동량의 에디가 복잡하게 혼합되어 이루어져 있으며, 이를 정확하게 모델링하고 이해하기 위해서는 제트류의 다양한 특성들을 잘 반영하여 연구를 수행해야 한다. 다양한 연구 수행 방법 중 수치해석 방법은 상대적으로 공간 및 시간적 비용이 적게 들어서 널리 사용되고 있다. 이러한 수치해석 방법에는 DNS(Direct Numerical Simulation), LES(Large Eddy Simulation), RANS(Reynolds Averaged Navier Stokes) 등이 있으며, 그중 LES는 난류 모델링을 사용하는 RANS 방법에 비해 더욱 정확한 흐름 모델링을 제공하는 장점이 있다. 이러한 LES는 대규모 에디는 직접 해석하면서, 일정 크기 이하의 에디는 모델링을 사용해 해석하는 것이 특징이다. 하지만, LES를 사용하기 위해서는 적절한 그리드 크기를 결정하는 것이 중요하며, 이는 모델의 정확성과 연산 비용에 큰 영향을 미친다. 하지만, 여전히 적절한 그리드 크기를 결정하는 것은 어려운 문제이다. 이러한 LES 모델링을 사용할 때 적절한 그리드 크기를 결정하기 위해서는 정확한 시간 평균 속도 변동을 연구하는 것이 앞서 선행되어야 한다. 따라서, 본 연구에서는 기계학습 기반 접근 방식을 사용하여 난류 제트 내 시간 평균 속도 변동을 예측하는 연구를 진행하였다. 즉, 난류 제트 역학을 이해하는 데 중요한 파라미터인 시간 평균 유속을 이용하여 시간 평균 속도 변동을 예측하는 데 초점을 맞추었다. 모델의 성능은 평균 제곱 오차와 R-제곱 등 다양한 지표를 사용하여 평가되었다.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.124-132
• /
• 2023

In this paper, we present a simple classification model based on statistical features and demonstrate the successful implementation of a brain-computer interface (BCI) based light on/off control system. This research shows study and development of light on/off control system based on BCI technology, which allows the users to control switching a lamp using electroencephalogram (EEG) signals. The logistic regression algorithm is used for classification of the EEG signal to convert it into light on, light off control commands. Training data were collected using 14-channel BCI system which records the brain signals of participants watching a screen with flickering lights and saves the data into .csv file for future analysis. After extracting a number of features from the data and performing classification using logistic regression, we created commands to switch on a physical lamp and tested it in a real environment. Logistic regression allowed us to quite accurately classify the EEG signals based on the user's mental state and we were able to classify the EEG signals with 82.5% accuracy, producing reliable commands for turning on and off the light.

• Journal of Korea Trade
• /
• v.27 no.1
• /
• pp.119-138
• /
• 2023

Purpose - This research is to empirically explore the differences in apparel consumption among male and female teenagers and college students in Korea and China. By conducting a survey to understand customers' needs and behaviors, fashion businesses will be able to improve their customer satisfaction and avoid redundancy, inventory, and the waste of resources, effort and money. Design/methodology - The research design considers the consumption patterns of male and female high school and college students in Korea and China. To analyze the data, the study employs decision trees, a type of machine learning algorithm. A decision tree model was developed to examine the relationship between the explanatory and response variables, which can be either quantitative or qualitative in nature. Findings - The main findings of this study indicate that there are differences in shopping behavior among different customer segments. The results show that men have a simpler shopping behavior compared to women. Additionally, cultural factors and the difference in fashion needs between students and non-students have a significant impact on the shopping choices of Chinese and Korean individuals. Originality/value - Existing studies often assume that the shopping behavior of high school and university students is similar and that there are no significant differences in clothing purchases between men and women across countries. The results provide valuable insights into the unique shopping behavior of different customer segments, and can inform fashion businesses in their efforts to meet the needs of their customers.