• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.173-177
• /
• 2007

The purpose of this study was to investigate the effect of salt formation on the percutaneous absorption of meloxicam through hairless mouse skin from a pressure sensitive adhesive (PSA) matrix. In addition, the influences of enhancers on the permeation of meloxicam or meloxicam-ethanolamine (MX-EA) salts across the hairless mouse skin were evaluated using a flow-through diffusion cell system. The salt formation of meloxicam resulted in lower permeation rate than the parent drug. $Span^{(R)}$ 80 provided the highest enhancing effect for meloxicam and meloxicam monoethanolamine salt. The maximum amount of the drug that can be loaded without retarding permeation rate was different depending on the compound. No relationship was found between the fluxes of meloxicam or MX-EA salts from saturated solutions and those from PSA matrices containing the same enhancer.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1987.05a
• /
• pp.22.2-22
• /
• 1987

경동맥 파열은 악성 종양으로 인한 두경부 수술의 1-5%에서 발생하고 80%의 사망률과 생존자의 50%에서 신경학적 후유증을 나타낸다. 저자들은 수술전ㆍ후 방사선치료를 받은 환자 2례에서 경동맥파열을 경험하였다. 제 1례는 51세의 남자로서 후두암($T_4$NoMx)으로 후두전적출술과 6120 rad의 수술후 방사선 치료 후 좌측 악하 부위에 악성 종양의 경동맥 침윤으로 시험적 수술후 6일만에 경동맥 파열로 사망하였다. 제 2례는 51세의 남자로서 하인두암($T_3$$N_2$Mx)으로 7200 rad의 수술전 방사선치료후 악성 종양의 재발로 후두전적출술과 일측의 근치적 경부곽청술후 누공을 형성하여 수술후 14일만에 경동맥 파열로 사망하였다.

• Journal of Veterinary Science
• /
• v.24 no.1
• /
• pp.13.1-13.11
• /
• 2023

Background: Highly pathogenic avian influenza viruses (HPAIVs) is an extremely contagious and high mortality rates in chickens resulting in substantial economic impact on the poultry sector. Therefore, it is necessary to elucidate the pathogenic mechanism of HPAIV for infection control. Objective: Gene set enrichment analysis (GSEA) can effectively avoid the limitations of subjective screening for differential gene expression. Therefore, we performed GSEA to compare HPAI-infected resistant and susceptible Ri chicken lines. Methods: The Ri chickens Mx(A)/BF2(B21) were chosen as resistant, and the chickens Mx(G)/BF2(B13) were selected as susceptible by genotyping the Mx and BF2 genes. The tracheal tissues of HPAIV H5N1 infected chickens were collected for RNA sequencing followed by GSEA analysis to define gene subsets to elucidate the sequencing results. Results: We identified four differentially expressed pathways, which were immune-related pathways with a total of 78 genes. The expression levels of cytokines (IL-1β, IL-6, IL-12), chemokines (CCL4 and CCL5), type interferons and their receptors (IFN-β, IFNAR1, IFNAR2, and IFNGR1), Jak-STAT signaling pathway genes (STAT1, STAT2, and JAK1), MHC class I and II and their co-stimulatory molecules (CD80, CD86, CD40, DMB2, BLB2, and B2M), and interferon stimulated genes (EIF2AK2 and EIF2AK1) in resistant chickens were higher than those in susceptible chickens. Conclusions: Resistant Ri chickens exhibit a stronger antiviral response to HPAIV H5N1 compared with susceptible chickens. Our findings provide insights into the immune responses of genetically disparate chickens against HPAIV.

• 전기의세계
• /
• v.58 no.11
• /
• pp.51-56
• /
• 2009

산업이 고도로 발달함에 따라 자기장의 정밀 측정 및 발생 등에 대한 관심이 증대되고 있다. 정밀 자기장 측정기를 이용하여 생체.의료공학, 지하광물 및 매설물 탐사, 지진 및 전파방해 예측, 지구물리탐사 및 우주 자기장 분포 측정, 항법장치, 국방 및 우주항공분야, 송유관 부식 연구 등에 활용되고 있다. KRISS에서는 첨단 자기분야의 표준/정밀측정 보급 지원을 위해 자기장 범위 $20\;{\mu}T$ ~ 1.2 mT에서 비자성 실험실, 지구자기장 상쇄장치 등을 이용하여 불확도 (4 ~ 21) ${\mu}T$/T, 자기장 범위 1 mT ~ 2.5 T에서는 헬름홀스 코일, 전자석, NMR 자기장 측정기 등을 사용하여 불확도 (10 ~ 80) ${\mu}T$/T의 표준을 유지하고 있다. 자기장는 자속(magnetic flux) 및 자속밀도(magnetic flux density)로 나눌수 있으며, 그 SI 단위는 웨버(Wb, weber)와 테슬러(T, tesla)이다. 그러나 아직까지 자성재료 등의 특성을 측정하는 전문가들은 SI 단위보다는 지금까지 널리 사용되어온 cgs 단위인 맥스웰(Mx, maxwell), 가우스(G, gauss), 외르스테드(Oe, oersted) 등에 익숙해져 있다. 앞으로 자기분야 전문가들도 기본 SI 단위로부터 소급이 유지되는 SI 자기단위의 사용을 기대해 본다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.274-282
• /
• 2013

The goal of this study was to analyze prevalence and distribution of congenitally missing teeth in 3302 patients from 7 to 15 years old, who had visited and taken panoramic radiographs at the Department of Pediatric Dentistry, from January 2008 to December 2012. The prevalence of hypodontia in the males (5.9%) was slightly higher than in the females (4.7%). In the affected patients, the mean number of congenitally missing teeth in the mandible was statistically higher than in the maxilla (p < 0.05). However, there was no significant difference in the number of congenitally missing teeth between left and right dentitions (p > 0.05). Excluding the Mn. third molars, the most frequent congenitally missing teeth site was the Mn. second premolars. In contrast, the most infrequent congenitally missing teeth sites were the Mx. and Mn. first premolars, and Mx. central incisors. The bilateral combination or antagonistic quadrants combination of congenitally missing teeth in hypodontia patients was 80.3%. The result of this study will contribute to clinicians to make accurate diagnosis and establish favorable treatment plans, by offering invaluable data about the number and distribution of congenitally missing teeth.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.283-293
• /
• 2015

The buffer is a key component of the engineered barrier system in a high-level radioactive waste (HLW) repository. The present study reviewed the requirements and functional criteria of the buffer reported in literature, and also based on the results, proposed an approach to establish a buffer concept which is applicable to an HLW repository in Korea. The hydraulic conductivity, radionuclide-retarding capacity (equilibrium distribution coefficient and diffusion coefficient), swelling pressure, thermal conductivity, mechanical properties, organic carbon content, and illitization rate were considered as major technical parameters for the functional criteria of the buffer. Domestic bentonite (Ca-bentonite) and, as an alternative, MX-80 (Na-bentonite) were proposed for the buffer of an HLW repository in Korea. The technical specifications for those proposed bentonites were set to parameter values that conservatively satisfy Korea's functional criteria for the Ca-bentonite and Swedish criteria for the Na-bentonite. The thickness of the buffer was determined by evaluating the means of shear behavior, radionuclide release, and heat conduction, which resulted in the proper buffer thickness of 0.25 to 0.5 m. However, the final thickness of the buffer should be determined by considering coupled thermal-hydraulic-mechanical evaluation and economics and engineering aspects as well.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.261-270
• /
• 2018

In this study, to replace the 'J-slot joint', a joint device between a disposal canister and an emplacement jig in Deep Borehole Disposal process, a novel joint device was designed and tested. The novel joint device was composed of a wedge on top of a disposal canister and a hook box at the end of a winch system. The designed joint device had merits in that it can recombine an emplaced canister freely without the replacement of the joint component. Moreover, it can be applied to various emplacement jigs such as drill pipes, wire-lines, and coiled tubing. To demonstrate the designed joint device, the joint device (${\Phi}110mm$, H 148 mm), a twin canister string (${\Phi}140mm$, H 1,105 mm), and a water tube (${\Phi}150mm$, H 1,500 mm) as a borehole model were manufactured at 1/3 scale. As deployment muds, Na-type bentonite (MX-80) and Ca-type (GJ II) bentonite muds were prepared at solid contents of 7wt% and 28wt%, respectively. The manufactured joint device showed good performance in pure water and viscous muds, with an operation speed of $10m{\cdot}min^{-1}$. It was concluded that the newly developed joint device can be used for the emplacement and retrieval of a deep disposal canister, below 3~5 km, in the future.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.71-83
• /
• 2018

Compacted bentonites were chosen as the backfill material and buffer in high level nuclear waste disposal due to its high swelling pressure, high ion adsorption capacity and low permeability. It is essential to estimate the swelling pressure in design and considering the safety of the nuclear repositories. The swelling pressure model of expansive clay colloids was developed based on Gouy-Chapman diffuse double layer theory. However, the diffuse double layer model is effective in predicting low compaction dry density (low swelling pressure) for certain bentonites, and invalidation in simulating high compaction dry density (high swelling pressure). In this paper, the new relationship between nondimensional midplane potential function, u, and nondimensional distance function, Kd, were established based on the Gouy-Chapman theory by considering the variation of void ratio. The new developed model was constructed based on the published literature data of compacted Na-bentonite (MX80) and Ca-bentonite (FoCa) for sodium and calcium bentonite respectively. The proposed models were applied to re-compute swelling pressure of other compacted Na-bentonites (Kunigel-V1, Voclay, Neokunibond and GMZ) and Ca-bentonites (FEBEX, Bavaria bentonite, Bentonite S-2, Montigel bentonite) based on the reported experimental data. Results show that the predicted swelling pressure has a good agreement with the experimental swelling pressure in all cases.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1385-1397
• /
• 2024

Bentonite is a recommended material for the multiple barriers in the final disposal of low-level radioactive waste (LLW) to prevent groundwater intrusion and nuclear species migration. However, after drying-wetting cycling during the repository construction stage and ion exchange with the concrete barrier in the long-term repository, the bentonite mechanical behaviors, including swelling capacity and hydraulic conductivity, would be further influenced by the groundwater intrusion, resulting in radioactive leakage. To comprehensively examine the factors on the mechanical characteristics of bentonite, this study presented scenarios involving MX-80 and KV-1 bentonites subjected to drying-wetting cycling and accelerated ion migration. The experiments subsequently measured free swelling, swelling pressure, and hydraulic conductivity of bentonites with intrusions of seawater, high pH, and low pH solutions. The results indicated that the solutions caused a reduction in swelling volume and pressure, and an increase in hydraulic conductivity. Specifically, the swelling capability of bentonite with drying-wetting cycling in the seawater decreased significantly by 60%, while hydraulic conductivity increased by more than three times. Therefore, the study suggested minimizing drying-wetting cycling and preventing seawater intrusion, ensuring a long service life of the multiple barriers in the LLW repository.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.523-534
• /
• 2007

This study is an analysis of types of patients and distribution of implant site and survival rate of $Xive^{(R)}$ implant. The following results on patient type, implant distribution and survival rate were compiled from 324 implant cases of 140 patients treated at the periodontal dept. of Yonsei University Hospital and G dental clinic between February 2003 and April 2006. 1. There are no dissimilarities between men and women, with patients in their 30, 40, 50s accounting for 80% of patients and accounted for 82% of implant treatments; the largest share of patients and implant treatments. 2. Mn, posterior area. accounted for 57% of implant treatments followed by Mx. posterior area(29%), Mx, anterior area(8%) and Mn, anterior area(6%). 3. Partial edentulous patients treated by single crown and bridge-type prosthesis accounted for 96% and fully edentulous patient accounted for the remaining 4%. 4. The major cause of tooth loss is periodontal disease, followed by dental canes, trauma and congenital missing. 5, The distribution of bone quality for maxillae was 54,2% for type III, followed by 30.8% for type II, 15% for type IV and 0% for type I. As for mandible, the distribution was 63% for type II, followed by 34% for type III, 2,5% for type I and 0,5% for type IV. 6. The distribution of bone quantity for maxillae was 55% for type C, followed by 35% for type B, 8% for type D and 2% for type A. As for mandible, the distribution was 60% for type B, followed by 32% for type C, 7% for type A and 0% for type D. 7. The majority of implants were those of 9.5-13 mm in length(95%) and regular diameter in width(82%). 8. The total survival rate was 98%. The survival rate was 97% in the maxillae region and 99% in the mandible region. 9. The survival rate in type I was 83%, in type II was 99%, in type III was 97% and in type IV was 100%. As for the bone quantity, the survival rate in type A and D(100%) was most, followed by type B(99%) and type C(96%). The results showed that $Xive^{(R)}$ implant could be used satisfactorily compare for the other implant system. But we most to approach carefully in certain extreme condition especially with poor bone quality and quantity.