• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.474-478
• /
• 2018

For process safety, fire and explosion characteristics of combustible materials handled at industrial fields must be available. The combustion properties for the prevention of the accidents in the work place are flash point, fire point, explosion limit, and autoignition temperature (AIT) etc.. However, the combustion properties suggested in the Material Safety Data Sheet (MSDS) are presented differently according to the literatures. The accurate combustion properties are necessary to safely treatment, transportation and handling of flammable substances. In the chemical industries, n-ethylaniline which is widely used as a raw material of intermediate products and rubber chemicals was selected. For safe handling of n-ethyl aniline, the flash point, the fire point and the AIT were measured. The lower explosion limit (LEL)of n-ethylaniline was calculated using the lower flash point obtained in the experiment. The flash points of n- ethylaniline by using the Setaflash and Pensky-Martens closed-cup testers measured $77^{\circ}C$ and $82^{\circ}C$, respectively. The flash points of n-ethylaniline using the Tag and Cleveland open cup testers are measured $85^{\circ}C$ and $92^{\circ}C$, respectively. The AIT of the measured n-ethyl aniline by the ASTM E659 apparatus was measured at $396^{\circ}C$. The LEL of n-ethylaniline measured by Setaflash closed-cup tester at $77^{\circ}C$ was calculated to be 1.02 vol%. In this study, it was possible to predict the LEL by using the lower flash point of n-ethylaniline measured by closed-cup tester. The relationship between the ignition temperature and the ignition delay time of the n-ethylaniline proposed in this study makes it possible to predict the ignition delay time at different ignition temperatures.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.85-93
• /
• 2013

Modern fire fighting jobs have been expanded to include areas of rescue, emergency medical service as well as conventional fire suppression, so that load for fire fighting jobs has been increased. Specifically, musculoskeletal disorders (MSDs) such as low back injury have been considered as one of major industrial hazards in heavy manual material handling during fire fighting jobs. This study tried to evaluate risk levels and to prepare background for reducing risk levels associated with heavy manual material handling during fire fighting jobs. This study applied two major tools in evaluating heavy manual material handling jobs which were NLE (NIOSH Lifting Equation) and 3DSSPP (3D Static Strength Prediction Program). A risk index in terms of heavy manual material handling during fire fighting jobs was identified. This index consisted of seven risk levels ranged from nine points (the first level) to three points (the seventh level). There was no job associated with the first level (the highest risk level) of index. There was only one job (life saving job) belonging to the second level (the second highest risk level) of index. The third level had jobs such as usage of destruction equipment and lifting patient. A total of basic eighteen jobs was categorized into six different levels (2nd-7th levels) of index. The outcome of the study could provide a good basis for conducting job intervention, preparing good equipment and developing good education program in order to prevent and reduce MSDs including low back injury of fire fighting jobs.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.319-328
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent MSDs(Musculoskeletal Disorders). However, most MSDs evaluation checklists have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of sensitivity analysis on three major evaluation checklists(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced subjects, analysis for the consistency of the results in terms of different evaluation times. The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced subjects. This might due to the fact that experienced subjects have had better ability to detect the bad working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced subjects., 2) All three checklists showed significantly different results in terms of different evaluation times. Further study on this subject would eventually provide a sophisticated evaluating guidelines for MSDs regarding determination of subject-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.251-253
• /
• 2005

• 동물약계
• /
• no.39
• /
• pp.3-3
• /
• 1997

[ $\cdot$ ]동물용의약품등 신규 제조업$\cdot$수입자 확인 $\cdot$동물용의약품등 취급규칙 개정고시 $\cdot$주문용배합사료첨가제 품목허가서 접수 $\cdot$가축질병 병성감정 실시기관 지정 $\cdot$가축전염병 발생 정보 $\cdot$제8차 수출촉진협의회 개최 $\cdot$MSDS 데이터 베이스 이용 안내 $\cdot$수출용 동물용의약품 편람 제작$\cdot$판매 $\cdot$감사청구제 시행 안내

• Journal of the Korea Safety Management & Science
• /
• v.7 no.3
• /
• pp.63-72
• /
• 2005

The purpose of this study is to examine the prevalence of musculoskeletal disorders and ergonomic risk factors for workers of printing business. A self-reporting survey and task analysis using video camera were performed to identify ergonomic risk factors associated with musculoskeletal disorders. We used the OWAS, RULA, and REBA methods to quantify the risk factors, and the results show that the printing business have high risk of work-related musculoskeletal disorders.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.506-515
• /
• 2015

Objectives: This study was conducted to evaluate the status of hazard communication regarding dental materials among dental hygienists in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Materials: A total of 310 dental hygienists were surveyed using self-administered questionnaires to investigate the status of hazard communication on dental materials and information needs. We collected instructions for use and material safety data sheets(MSDSs) for 67 dental materials frequently used at dental hospitals located in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Results: The questionnaire surveys showed that only 11% of the 310 dental hygienists had knowledge of MSDS and 46.8% of respondents never read instructions for use before using materials. Just 7.4% of dental hygienists have undergone training on hazard information for dental materials. In particular, dental hygienists working at dental clinics had significantly lower response rates on knowledge of MSDS(p<0.001), reading of instructions for use(p=0.042) and training on the hazard information of dental materials(p=0.004) than those in dental hospitals or general hospitals. The essential information most desired by dental hygienists was hazard identification(82.3%) followed by first-aid measures(53.9%), handling and storage(51%), disposal considerations (49%) and toxicological information(47.1%). All dental materials were on foreign products which came from Japan(59.7%), the USA(26.9%) and Liechtenstein(13.7%). In terms of usage, 56.7% of dental materials were prosthetic, followed by conservation(31.3%), orthodontics(9%), and prevention(3%). We found that dental hygienists had accessed MSDSs for only five dental products among the 67 dental materials. The instructions for the use of the 67 dental materials provided hazard identification(64.2%), first-aid measures(83.6%), handling and storage(97%), disposal considerations(20.9%) and toxicological information(26.9%). Conclusions: Based on the results of this study, the hazard communication system for dental hygienists working at dental clinics should be improved.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.57-67
• /
• 2009

The psychosocial stress and musculoskeletal disorders(MSDs) have been one of major health problems for hospital workers. This study tried to understand the relationship between symptoms associated with MSDs and risk factors such as working posture, job stress, psychosocial stress and fatigue. A total number of 655 hospital workers participated in this study. Specifically, REBA was applied for evaluating working posture and a checklist prepared by KOSHA(Korean Occupational Safety and Health Agency) was used for symptom survey. A questionnaire from KOSHA was also used for collecting data associated with job stress, psychosocial stress and fatigue. All these data were formulated and modeled by path analysis which was one of major statistical tools in this study. Specifically, path analysis for the data we collected came up with several major findings. As a result, as for body part(neck), (waist) and (arms) the degree of risk of work posture measured with the use of job stress(KOSS), psycho-social stress(PWI-SF) and REBA is significantly more affected by fatigue than muscular skeletal disease related consciousness symptom. However, regarding bod(wrist), the degree of risk of work posture measured with the use of job stress(KOSS) and REBA is directly affected by muscular skeletal disease related consciousness symptom. This study is meaningful in that the study clarified the causal relations of the degree of risk of work posture, degree of fatigue, and muscular skeletal disease related consciousness symptoms by each body part measured with the use of work stress(KOSS), psycho-social stress(PWI-SF) and REBA.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.27-32
• /
• 2010

Emergency preparedness plan (EPP) is the systematic management of activities that involve a material degree of risk of loss or other damage to the surroundings (people, property and environment), and the boundary of accident recovery plan (ARP). The main purpose of the program is to provide a safety management system to each facility in order to enable to prevent accident and to control accident immediately. The EPP includes not only typical safety-related documentations such as material safety data sheet (MSDS), standard operation procedure (SOP), emergency response plan(ERP). EPP is established basis of the preliminary safety analysis involving risk identification, assessment and prevention plans. The program is also helpful for government or related agencies to control a number of accidents in small-scale companies in the whole country.