• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.59-65
• /
• 2015

To build a flexible network than traditional transport network, the carrier ethernet technology is emerging in network industry recently and MPLS-TP technologies are being applied as a major standard technology for the carrier ethernet. However, network management technologies required to handle equipment installed in MPLS-TP network are not clear. This paper propose an efficient method to build a management network automatically without any additional configuration when network equipments are installed in MPLS-TP network. The proposed scheme reduce cost required for both equipment installation and network maintenance by minimizing configuration procedures of connecting management system with network. We evaluated the effectiveness of the proposed scheme by applying the scheme to a real MPLS-TP equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.68-73
• /
• 2001

MPLS(Multi protocol Label Switching) is standard skill for added to speed and control the Network Traffic. MPLS concerned the routing protocol to relative Pack line, Each Pack composed label and node, saved the time to seek the address of node. MPLS worked IP, ATM and Network protocol of flame rely. MPLS is Network OSI suport model, 2Layer send to most of Packinsted of 3Layer Switching. MPLS is added speed Traffic of QoS and effective controled the Network.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.37-40
• /
• 2000

Multi Protocol Label Switching (MPLS) is a high performance method for forwarding packets (frames) through a network. It enables routers at the edge of a network to apply simple labels to packets (frames). we use MPLS in the core network for internet. MPLS provide high speed switching and traffic engineering in MPLS domain but at the Label Edge Router(LER) there is frequently cell discarding via congestion and buffer management method. It is one of the most important reasons retransmission and congestion. In this paper we propose advanced LER scheme that provide less cell loss rate also efficient network infrastructure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.677-684
• /
• 2002

Today's Internet does not have efficient traffic engineering mechanism to support QoS for the explosive increasing internet traffic such as various multimedia traffic. This functional shortage degrades prominently the quality of service, and makes it difficult to provide multi-media service and real-time service. Various technologies are under developed to solve these problems. IETF (Internet Engineering Task Force) developed the MPLS (Multi-Protocol Label Switching) technology that provides a good capabilities of traffic engineering and is independent layer 2 protocol, so MPLS is expected to be used in the Internet backbone network$\^$[1][2]/. The faults occurring in high-speed network such as MPLS, may cause massive data loss and degrade quality of service. So fast network restoration function is essential requirement. Because MPLS is independent to layer 2 protocol, the fault detection and reporting mechanism for restoration should also be independent to layer 2 protocol. In this paper, we present the experimental results of the MPLS OAM function for the performance monitoring and fault detection 'll'&'ll' notification, localization in MPLS network, based on the OPNET network simulator

• Annual Conference of KIPS
• /
• 2001.10b
• /
• pp.1529-1532
• /
• 2001

ACE 2000 ATM 교환기를 이용하여 MPLS 교환기를 구현 시, ATM 가입자 및 중계선을 수용하여 스위치와 정합 기능을 수행하는 AIM(ATM interface module)에 IP 패킷에 대한 룩업을 수행하여 ATM 스위치로 패킷을 포워딩하는 HFEA(High performance Forwarding Engine board Assembly)를 연동하기 위해서는 UTOPIA Level2 연결이 요구된다. 그러나 HFEA 에서 622Mbps 급 성능의 MXT4400(SAR) 칩은 TSAR(Transmit SAR)로 운용 시 Master모드로 동작하게 되고, AIM 모듈 또한 Rx에서 Master모드로 동작하기 때문에 이들을 연결하기 위해서는 양 모듈간에서 Slave 모드로 동작할 수 있는 UTOPIA Controller가 필요하게 된다. 이에 따라 ALMA(AW Layer Module Assembly)칩과 HFEA TSAR 사이에서 데이터를 전달하는 UTOPIA Controller를 Xilinx를 이용해 FPGA로 구현하였다.

• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.155-164
• /
• 2002

MPLS is a integrated technology by using routing function and label swapping in the network layer. Based on the previous forwarding equivalence classes, it adds the fixed length label in ingress of the MPLS domain. For the routing, without the packet header information, it uses label for the forwarding decisions. In this paper, traffic engineering requirements in the MPLS internet will be setup. The traffic engineering function have to be performed previously with the network topology. In addition to, we presents the IP network topology and main function with MPLS signaling protocol.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.291-294
• /
• 2000

This paper describes on the threats in the MPLS Network. Also we discuss on attack scenario that are Unauthenticated Access, Data disclosure and Data modification. Finally we discuss and suggest the best various Security of solutions in MPLS network

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.927-937
• /
• 2003

Network based VPN(Virtual Private Network) using MPLS(Multiprotocol Label Switching) technology is regarded as a good solution for intranets or extranets because of the low cost and the flexibility of the service provision. In this paper, we describea mechanism that allows the VPN users to move from one site to another site of the VPN network based on the BGP-E MPLS technology. This mechanism is designed for and implemented on PE(Provider Edge) routers of the backbone network. PE routers connected to the VPN sites establish a new MPLS path to the mobile node after they detect movement of the mobile VPN node. The new location may belong to the same VPN or to different VPN. We designed VPN management and control functions of the PE routers in order to interface with the Mobile IP protocol. The pilot implementation and performance measurement were carried out on a testbed.

• Journal of KIISE:Information Networking
• /
• v.28 no.4
• /
• pp.602-610
• /
• 2001

In the MPLS(Multiprotocol Label Switching) forwarding paradigm, once a packet is assigned to a FEC(Forwarding Equivalence Class), no further header analysis is done by subsequent routers; all forwarding is driven by the labels. This has a number of advantages over conventional network layer forwarding. The MPLS LER(Label Edge Router) is located at the boundary of MPLS domain and plays a role in connecting with the existing Internet as an ingress or an egress router. That is, the MPLS LER as an ingress router assigns a label to a packet which enters the MPLS network from the Internet by analyzing its header and forwards to a corresponding next router in MPLS domain. As an egress router, the MPLS LER turns the packets out of the MPLS network by performing the reverse operation. In this paper, we analyze the traffic performance of an MPLS LER system and estimate the IP(Internet Protocol) packet processing capacity of the system using queueing model and simulation. It is found that the maximum IP packet processing capacity of the system is estimated by 420,000 through 460,000 packets/sec.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.31-39
• /
• 2002

The VPN(Virtual Private Network) is a private network constructed logically on a public network infrastructure. There have been numerous studies to support the VPN services by using different technologies such as IP in IP, GRE, L2TP, MPLS and so on. Among these technologies, MPLS has shown many merits in aspects of QoS, security, and management, compared with other technologies. As an enhancement of the VPN that is controlled by MPLS PE(Provider Edge) routers, this paper presents the VPN controlled by MPLS CE(Customer Edge) routers. The functional architecture of the CE based VPN and operations of the CE routers are described along with the performance comparison of CE based MPLS VPN. It has been shown that the CE based VPN has more advantages than PE based VPN with respect to independency, scalability, security, and complexity.