• 한국결정성장학회지
• /
• 제18권5호
• /
• pp.184-190
• /
• 2008

단순 침전법으로 타원, 땅콩, 아령, 바디가 있는 구형 모양의 $CaMoO_4$ 결정을 합성하였다. $Ca^{2+}$ 이온과 $MoO_4^{2-}$ 이온 농도가 증가함에 따라서 $CaMoO_4$의 형태는 차원형에서 땅콩 모양과 아령 모양을 거쳐서 마디가 있는 구형 모양으로 전개됨을 확인하였다. 이러한 $CaMoO_4$ 결정의 형태의 전개는 프랙탈 메커니즘에 기인한다. 타원형의 양 끝 부분에서부터 가지를 치면서 결정 성장이 시작된다. 1차와 2차 프랙탈 성장에 의해서 땅콩 모양과 아령 모양이 각각 형성되었다. 아령 모양에서 더 프랙탈 성장을 하여 최종적으로 마디가 있는 구형이 형성되었다.

• 한국환경과학회지
• /
• 제29권1호
• /
• pp.95-108
• /
• 2020

Silver nanoparticles were loaded onto g-C₃N₄ (CN) with a nanoroll-type morphology (Ag/CN) synthesized using a co-polymerization method for highly selective conversion of toxic nitrobenzene to industrially-valuable aminobenzene. Scanning electron microscopy and high-resolution transmission electron microscopy (HRTEM) images of Ag/CN revealed the generation of the nanoroll-type morphology of CN. Additionally, HRTEM analysis provided direct evidence of the generation of a Schottky barrier between Ag and CN in the Ag/CN nanohybrid. Photoluminescence analysis and photocurrent measurements suggested that the introduction of Ag into CN could minimize charge recombination rates, enhancing the mobility of electrons and holes to the surface of the photocatalyst. Compared to pristine CN, Ag/CN displayed much higher ability in the photocatalytic reduction of nitrobenzene to aminobenzene, underscoring the importance of Ag deposition on CN. The enhanced photocatalytic performance and photocurrent generation were primarily ascribed to the Schottky junction formed at the Ag/CN interface, greater visible-light absorption efficiency, and improved charge separation associated with the nanoroll morphology of CN. Ag would act as an electron sink/trapping center, enhancing the charge separation, and also serve as a good co-catalyst. Overall, the synergistic effects of these features of Ag/CN improved the photocatalytic conversion of nitrobenzene to aminobenzene.

• Current Photovoltaic Research
• /
• 제7권4호
• /
• pp.130-133
• /
• 2019

The Ag crystallite formed during the formation of the front electrode forms a contact between the metal of the electrode and the emitter of the cell. Contact between the electrode and emitter plays an important role in collecting electrons generated by the solar cell. Therefore, Ag crystallite formation is an important factor. In order for solar cells to have good characteristics, it is important to understand the factors influencing the Ag crystallite formation. Factors affecting the formation of Ag crystallites include Si emitter, morphology, Si defect and firing temperature. The influence of surface morphology on Ag crystallite formation was confirmed throughout this study. In the case of fine texturing, the Ag crystallites were formed at the pointed parts. The finer the texturing, the sharper areas and more Ag crystallites were formed. This was confirmed by SEM image and FF calculation.

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.926-934
• /
• 1992

Uniform diamond films in a few $\textrm{mm}^2$ size and locally isolated diamond single crystals in size of 60 $\mu\textrm{m}$ were synthesized on Si-wafer and Al2O3 substrate by the method of acetylene flame. The effects of substrate temperature and flow ratio of oxygen to acetylene on the morphology of deposited diamond were investigated. According to the observations of growth behavior of diamond on Si substrate with respect to substrate surface pretreatment and flow ratio, it was shown that well faceted diamonds could grow uniformly when flow ratio was above 0.9 and substrates were densely scratched. With increasing substrates temperature, the crystal morphology changes from octahedron bounded by only {111} plane below 850$^{\circ}C$ to cubo-octahedron with almost equal development of {111} and {100} plane in the temperature range of 850∼950$^{\circ}C$. Between 950∼1050$^{\circ}C$, the {111} faces become rough and concave. Above 1050$^{\circ}C$, new crystallites begin to grow on concave {111} surface and overall morphology looks like cubo-octahedron with degenerated {111} faces. These changes of morphology can be understood in terms of the different growth mode of each crystallographic plane with respect to the substrate temperature and supersaturation. And the observed phenomena on {111} planes can be related to the face instability and twin generation.

• Applied Microscopy
• /
• 제44권2호
• /
• pp.68-73
• /
• 2014

With wide use of nano-materials, it is increasingly important to address their potential toxicity to mammalian cells. However, toxic effects of these materials have been mainly assessed by the cell survival assays. Considering that mitochondrial morphology and quality are highly sensitive to the condition of the cells, and the impairment of mitochondrial function greatly affect the survival of cells, here we tested the impact of multi-walled carbon nanotubes (MWNT) on the survival, mitochondrial morphology, and their membrane potential in HeLa cells. Interestingly, although MWNT did not induce cell death until 24 hours as assessed by pyknotic cell assay, mitochondrial length was elongated and the mitochondrial membrane potential was significantly reduced by exposure of HeLa cells to MWNT. These results suggest that MWNT exposure is potentially harmful to the cell, and the mechanism how MWNT alters mitochondrial quality should be further explored to assess the safety of MWNT use.

• 대한의생명과학회지
• /
• 제10권3호
• /
• pp.293-298
• /
• 2004

This study was performed to compare the growth rates, cellular fatty acid compositions and morphology by using electron microscope of Escherichia coli (E. coli) grown in various conditions including different concentrations of phenol, CdCl₂ and HgCl₂. Ninety eight E. coli strains were isolated from Naktong river and human feces. The content of unsaturated fatty acids, especially 16:1ω7c and 18:1ωc increased as the concentration of phenol and CdCl₂ increased. The content of unsaturated fatty acid increased up to 50 ppb of HgCl₂, but decreased at 75 ppb of HgCl₂. There were more unsaturated fatty acids than saturated fatty acid in the presence of toxic substances. However, the ration was reversed when the affected E. coli was transferred to toxic substance free fresh trypticase soy broth medium. Also, by using transmission electron microscope these cells were observed to various morphological deformation by heavy metals and their deposition on the surface. From these results, we suggested that the changes of major fatty acids composition and morphology of E. coli may be considered to indicate contaminated levels of heavy metals or organic solvents. The information presented here may be useful in predicting effects of heavy-metal and organic solvent contamination in streams and provides a basis for further studies of metal or organic solvent effects on microbial communities.

• ALGAE
• /
• 제26권2호
• /
• pp.141-152
• /
• 2011

The present study describes the morphology, taxonomy, and distribution of species belonging to the diatom genus Rhizosolenia in Korea's marine coastal waters. From September 2008 to February 2010, we collected phytoplankton samples at 30 sites along the Korean coastline and studied them by light and scanning electron microscopy. We found 6 rhizosolenid genera in our samples: Rhizosolenia, Dactyliosolen, Guinardia, Pseudosolenia, Proboscia, and Neocalyptrella. In the present paper, we studied the following rhizosolenid species and compared them with congeners: R. pungens, R. fallax, R. imbricata, Rhizosolenia sp. 1, and Rhizosolenia sp. 2. The morphology of R. pungens exhibits important diagnostic characteristics in its girdle segment structure in the column and in its external process. To distinguish R. fallax and R. imbricata, the most important characteristics are the striation and the velum structure. R. pungens occurred in our samples all along the Korean coast. Only rarely did we find R. imbricata in the samples and at low abundance. We recorded R. fallax, Rhizosolenia sp. 1 and Rhizosolenia sp. 2 for the first time in Korean waters, but they rarely occurred.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.26-32
• /
• 2009

As a part of utilizing the nanocellulose (NC) from lignocellulosic components of wood biomass, this paper reports preliminary results on the products of sulfuric acid hydrolysis. The purpose of this study was to investigate the morphology of both NC and micro-sized cellulose fiber (MCF) isolated by acid hydrolysis from commercial microcrystalline cellulose (MCC). Field emission.scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were employed to observe the acid hydrolysis suspension, NC, and MCF. The electron microscopy observations showed that the acid hydrolysis suspension, before separation into NC and MCF by centrifugation, was composed of nano-sized NCs and micro-sized MCFs. The morphology of isolated NCs was a whisker form of rod-like NCs. Measurements of individual NCs using TEM indicated dimensions of 6.96$\pm$0.87 nm wide by 178$\pm$55 nm long. Observations of the MCFs showed that most of the MCC particles had de-fibered into relatively long fibers with a diameter of 3-9 ${\mu}m$, depending on the degree of acid hydrolysis. These results suggest that proper technologies are required to effectively realize the potentials of both NCs and MCFs.

• 한국주조공학회지
• /
• 제27권2호
• /
• pp.77-82
• /
• 2007

The effects of thermal gradient and solidification rate on the dendrite arm spacing and carbide morphology were investigated in directionally solidified Ni-base superalloy, CM 247LC. Thermal gradient was controlled by changing the position of the cold chamber and the furnace set temperature. The interface morphology changed from the planar to dendritic as increasing solidification rate. It was found that the dendrite spacing decreased as increasing the thermal gradient as well as the solidification rate. Also, as increasing solidification rate, carbide morphology changed from blocky shape to script and spotty shapes.

• ALGAE
• /
• 제27권4호
• /
• pp.225-234
• /
• 2012

Zygnema is a conjugating filamentous green algal genus that is distributed in a broad range of freshwater habitats, from sea level to alpine summits. Although more than 150 species have been described worldwide, their taxonomy remains unclear, probably owing to their relatively simple morphology. We investigated the detailed morphology of Korean Zygnema species, combined with analysis of the plastid psbA gene from 22 specimens of the genus and putative relatives, in order to develope a key to their identification and isolation, and to determine their relationships. We recognized two species of Zygnema; Z. insigne and Z. leiospermum, based on morphological characters such as width of the vegetative cell, position of zygospores, dimensions and form of spores, shape of female gametangia, and color of mesospores. The analysis of psbA data was consistent with morphological comparison. The pairwise divergence between two species was 3.7-4.1% (34-38 bp) in psbA sequences. The phylogeny of psbA revealed the monophyly of Z. insigne and Z. leiospermum together with two isolates of Z. circumcarinatum from Germany and Scotland. This is the first report on the psbA gene phylogeny of Zygnema.