• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.834-841
• /
• 2005

Polyethylene glycol esters (PEG-esters) were synthesized by condensation reaction of dicarboxylic acid such as adipic acid and sebacic acid and several PEGs. The PEG-esters were analyzed by FT-IR, $^1H-NMR$ and HPLC for structure analysis, and by GPC for molecular weight. Through the analysis of surface tension, critical micelle concentration (CMC), aluminum contact angle of water solution containing the PEG-ester, the synthetic PEG-esters are proven to exhibit surfactant properties. The surface tension ranged from 45 to 50 dyn/cm depended on the concentration and structures of the PEG-esters. The surface tension of PEG-esters with sebacic acid moiety and short polyoxyethylene unit resulted in lower value than that of PEG-ester with adipic acid moiety and long polyoxyethylene unit. The CMC of water solution containing 2.5 wt% PEG-ester with sebacic acid moiety estimated at $0.9{\times}10^{-5}{\sim}5.3{\times}10^{-3}mol/L$ depended on the structures of PEG-esters. The CMC of PEG-esters with long polyoxyethlene unit showed a higher value than that of PEG-esters with short polyoxyethylene unit. Meanwhile, the CMC of PEG-esters with adipic acid moiety was not distinct due to their high hydrophilic character. As the results of contact angle and cutting time aginst aluminum, the contact angle ranged from $45^{\circ}$ to $53^{\circ}$ depended on the concentration of PEG-esters. The cutting time of aluminum showed the shortest value at CMC, but the longest value above CMC. This fact indicates that the CMC of PEG-esters is a very important factor in drilling aluminum.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.742-748
• /
• 1998

Experiments have been conducted to investigate synergistic effects and mechanisms of the Alaskan subbituminous coal/polypropylene (PP). Coliquefaction of coal/PP gave the synergistic effect in yields by 17% compared to independent liquefactions of coal or PP at $430^{\circ}C$. To analyse coliquefaction mechanisms, the second and zeroth order kinetic models were developed for coal and PP conversions respectively. When the models were simulated to fit coliquefaction results, those represented results successfully with the correlation coefficient of 0.99. The amount of tetralin needed to liquefy unit mass of coa 1(${\beta}$) was also calculated using the developed model. According to the calculated results, $\beta$ increased from 0.4 to 1.0 as the coliquefaction temperature increased from $410^{\circ}C$ to $470^{\circ}C$. This indicated that tetralin lowered the molecular weight of oil produced, and this phenomenon was recognized by the GPC analyses. Furthermore, it was found that tetralin prohibited the liquefaction of PP when coal was not added. On the other hand, tetralin was believed to act as a hydrogen-donor solvent to coal rather than prohibit PP liquefaction during coliquefaction. Therefore, the liquefaction rate of PP increases and synergistic effects in oil yields are mainly due to the increase in PP liquefaction during coal/PP coliquefaction.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2014

Nylon66 extrudates as a function of the extrusion number were prepared by a twin screw extruder. Chemical structures, thermal properties, melt index, crystal structures, mechanical properties such as the tensile strength, elongation at break and impact strength, and rheological property were measured by FT-IR, $^1H$-NMR, melt indexer, DSC, TGA, XRD, universal tensile tester, Izod impact tester, and rheometer. FT-IR and $^1H$-NMR characterizations indicated that the number of extrusions did not affect the chemical structure. The decrease in the molecular weight was checked by the melt index of extrudates. There were no effects of the thermal history on the melting and degradation temperature. The tensile and impact strength and modulus were found to be similar, regardless of the number of extrusions, but the elongation decreased significantly. The complex viscosity of extrudates at low frequencies decreased with the extrusion number. No structural changes after extrusion were confirmed from the fact that there was no change in the slope and shape of G'-G" plot.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.221-226
• /
• 2016

Production of eco-friendly and biologically harmless materials is strongly required in all industries. In particular, reducing volatile organic compounds in coating processes is extremely important to secure worker's safety. During recent two decades, extensive research works on water-borne polyurethane dispersion (PUD) have been continuously developed as an alternative to solvent-borne polyurethane. However, PUD was shown inferior mechanical properties to the organic solvent-borne polyurethane due to a limit to the molecular weight increase, which resulted in the limit of applications. To overcome this drawback, several approaches have been examined such as polymer blends and thermal/radiation induced crosslinking. Among these methods, the radiation curing system was suitable for industrialization because of the high crosslinking density and fast curing speed. In this study, we overcame the drawback for PUD via introducing benzophenone radiation curable units to PUD. We synthesized PUD films which possessed good dispersion in water for 30 days, increased Tg and Td more than $5^{\circ}C$ after UV curing film as well as improved young's modulus more than double.

• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.108-116
• /
• 2003

To investigate bacteria with algal Iytic activities against Anabaena cylindrica when water blooming occurs and to study enzyme profiles of alga-Iytic bacteria, various bacterial strains were isolated from surface waters and sediments in eutrophic lakes or reservoirs in Korea. Abacterial strain AK-07 was characterized and identified as Acinetobacter johnsonii based on its16S rDNA base sequence. When AK-07 was co-cultivated with A. cylindrica, bacterial cells propagated to $8\;{\times}\;10^8$ cfu $ml^{-1}$ and Iyses algal cells. However, culture filtrates of AK-07 did not exhibit algal Iytic activities. That suggesting the enzymes on the surfaces of the bacterium might be effective algal Iytic agents to cause Iyses of cells. Acinetobacter johnsonii AK-07 exhibited high degradation activities against A. cylindrica, and formed alginase, caseinase, lipase, fucodian hydrolase, and laminarinase. Moreover, glycosidases for example ${\beta}$-galatosidase, ${\beta}$-glucosidase, ${\beta}$-glucosaminidase, and ${\beta}$-xylosidase, which hydrolyzed ${\beta}$-0-glycosidic bonds, were found in cell-free extracts of A. johnsonii AK-07. Other glycosidase such as ${\alpha}$-galctosidases, ${\alpha}$-N-Ac-galctosidases, ${\alpha}$-mannosidases, and ${\alpha}$- L-fuco-sidases, which cleavage ${\alpha}$-0-glycosidic bondsare not detected. In the results, enzyme systemsof A. johnsonii AK-07 were very complex to do-grade cell walls of cyanobacteria. The polysaccharides or peptidoglycans of A. cylindrica maybe hydrolyzed and metabolized to a range of easily utilizable monosaccharides or other low molecular weight organic substances by strain AK-07 of A. johnsonii.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.77-86
• /
• 2002

Chitin, a $\beta$-1,4 polymer of N-acetyl-D-glucosamine, is one of the most abundant organic compounds in nature. Chitinase (EC 3.2.1.14) is an enzyme that degrades chitin to chito-oligosaccharides, diacetyl rhitobiose and N-acetyl-D-glucosamine. An extracellular chitinase-producing bacterial strain was isolated from soil and named to as Bacillus subtilis JK-56. Optimum culture condition of B. subtilis JK-56 for the production of chitinase was 1% chitin, 0.5% polypepton, 0.1% KCl, 0.05% MnS $O_4$.4$H_2O$, 37$^{\circ}C$, initial pH 7.0 and 40 hour culture time. When B. subtilis JK-56 was grown in the optimum medium, one major active band and two minor active bands were detected by native-PAGE and active staining of the gel. Among them, the major band was purified from the culture supernatant by 70% ammonium sulfate precipitation and native-PAGE with BIO-RAD Model 491 Prep-Cell and named as Chi-56A. Its molecular weight was estimated to be 53kDa monomer and the isoelectric point (pI) was pH 4.3. The pH and temperature for the optimum activity of Chi-56A were pH 6.0 and $65^{\circ}C$, respectively. Chi-56A was stable up to $65^{\circ}C$ and in alkaline region. Its $K_{m}$ value for colloidal chitin was 17.33g/L. HPLC analysis of the reaction products confirmed that Chi-56A was an exo type chitinase.e.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.256-261
• /
• 1991

To isolate new antioxidants from twelve edible seaweeds, mixed methanol and chloroform extract of marine algae was fractionated into several subfractions and their antioxidant activities were measured by using AOM and 1, 1-diphenyl-2-picrylhydrazyl (DPPH). Especially the aqueous-methanol soluble fractions of brown and red algae showed a considerable antioxidant effect. Their antioxidant activities were stronger than synthetic antioxidants such as BHA, BHT, under the same concentration. Further fractionation of the aqueous-methanol soluble fractions using silica gel column chromatography yielded five subfractions. Among them methanol fraction exhibited high DPPH quenching activities. Also, it was confirmed to be benzene-derivative substances of two compounds by UV, HPLC, GC/MS analysis. Its each molecular weight was about 181, 238. These results suggested the existence of two effective natural antioxidant compounds in three edible marine algae.

• The Journal of the Korean Society for Microbiology
• /
• v.22 no.3
• /
• pp.309-321
• /
• 1987

For the investigation of microbiological and immunological specificity of Bacteroides gingivalis, Bacteroides gingivalis were isolated, enumerated and characterized from 13 Korean rapidly progressive periodontitis and 7 healthy control by anaerobic culture technique. The total proportion of black-pigmented Bacteroides from Korean R.P.P. patients and healthy control were 8.78% and 0.92%, respectively, among total isolated black-pigmented Bacteroides. In antibiotic susceptibility test, Bacteroides gingivalis isolated from R.P.P. patients were sensitive to Ampicillin and Tetracycline, and resistant to Gentamicin and Erythromycin in disc diffusion method. In antibiotic broth dilution method, the minimum inhibitory concentration(MIC) to Bacteroides gingivalis was 2 unit/ml of Penicillin and $0.25{\sim}1{\mu}g/ml$ of Tetracycline, respectively. The concentration of serum IgG in rapidly progressive periodontitis patients were sigificantly higher than that of healthy control, and concentration of diluted gingival crevicular IgG has not any significant differences between two groups. Serum and gingival crevicular IgG antibody to Bacteroides gingivalis were significantly higher titer in rapidly progressive periodontitis patients to compare with healthy control. The lipopolysaccharide profiles of 2 Korean B. gingivalis in silver stained sodium dodecyl sulfate-polyacrylamide gel electrophoresis were similar to type strains of B. gingivalis and typical LPS band were appeared around the 24-Kd molecular weight. Immunodiffusion test and immunoelectrophoresis of the L.P.S. extracted from 2 Korean B. gingivalis and 2 kinds of type strains of B. gingivalis showed that B. gingivalis Korean-1 was reacted identically to B. gingivalis ATCC 33277. In trypsin and ${\alpha}$-glucosidase activity test of 2 Korean B. gingivalis, both of them revealed positive trypsin and negative ${\alpha}$-glucosidase activity, respectively. These investigation suggested that B. gingivalis is important pathogenic plaque bacteria for the pathogenesis of periodontitis and further study is needed to purify and characterize of the species-specific antigens of this organisms to develop monoclonal antibody and potential diagnostic reagents.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.4
• /
• pp.309-315
• /
• 2005

The objective of this study was to investigate an influence of chitosan addition on quality attributes of sponge cake. The cake was made with various chitosan concentration (1,000, 2,000, and 3,000 ppm), and it was stored for 120 hr at three temperatures (5, 15, and $25^{\circ}C$). By analyzing the moxogram data of wheat flour-chitosan composite flour, the ascending angle of the samples containing chitosan was sharply increased and the descending angle had lower values compared to that of control as the chitosan addition concentration was increased. The loaf weights and volumes of the samples with chitosan were increased compared to those of the control. Crumb firmness of the control showed relatively high value compared to those ($5\~6$ N) of other samples containing chitosan regardless of storage temperature and storage period, and the firmness after 5 days storage at $5^{\circ}C$ showed the highest value (about 9.3 N). Sensory evaluation attributes of sponge cakes did not show significant differences by chitosan addition up to concentration of 2,000 ppm.

• Journal of fish pathology
• /
• v.8 no.1
• /
• pp.37-46
• /
• 1995

The amino acid analysis of polyhedrin protein and nucleotide sequence of polyhedrin gene in H. cunea nuclear polyhedrosis virus (HcNPV) genome have been studied. Polyhedrin had three polypeptide bands in SDS - polyactylamide gel electrophoresis. The major polypeptide had a molecular weight of 25 kd. The polyhedrin was composed of 17 different amino acids. HcNPV DNA was digested with EcoRI restriction enzyme and hybridized with ($\alpha^{32}P$) -labelled AcNPV polyhedrin gene cDNA. The polyhedrin gene was located on the fragment of EcoRI-H. The EcoRI - H fragment containing polyhedrin gene was cloned into the EcoRI site of pUC8 vector which was confirmed with southern blotting, and the recombinant plasmid containg polyhedrin gene was designated as hPE-H. The promoter region of polyhedrin genomic DNA was sequenced. The sequences identified as the TATA box was found at the 5' flanking region of the polyhedrin genomic DNA approximately -79 bp upstream from the transcriptional start site. But CAAT-like box was not shown near the TATA-like box in the polyhedrin gene. Four tandem repeats with the sequence 5' -CTAATAT-3' and 5'-TAAATAA-3' were found between -141 and -108 or -83 upstream and -52 bp downstream from the translation start site. About -141 bp region upstream from the translational start site was highly AT (78%) rich. The coding region for the polyhedrin starts and ends with ATG and TAA, respectively.