• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2015

Korea Institute of Geoscience and Mineral Resources (KIGAM) and Mineral Resources Authority of Mongolia (MRAM) performed test drilling in the right side of Deposit 2 in Ugii Nuur Fe-Mn occurrence area, Mongolia. It was decided to perform the drilling with 65 degree of drilling angle due to the technological limit of low angle drilling and designed to find ore bodies in cores between 50 m and 70 m. Ore bodies were found in lower depths than expected probably due to the folds in the subsurface in three drilling sites other than drilling position 3. Ore body in drilling position 3 was found in the similar depths with the expected depths. In drilling position 1, high Fe bearing ore body (more than 40%) was found between 47.45 and 50 m and between 56.35 and 57.1 m. The rest of ore body in drilling position 1 and ore bodies in other three sites have low Fe contents with about 10% of Fe. In drilling position 1, maximum and average Mn contents are about 10% and 1%, respectively, and in other three sites, average Mn contents are about 0.2%. Whereas Mn contents are low, Fe and Mn contents show very similar variations with varying depths, suggesting that they were moved and concentrated together in the ore genesis process. Proved resources estimated for the ore bodies confirmed by drilling are Fe 231,661 tonne with 11.82% of the average Fe grade. Possible resources supposing that ore bodies of DP-1 and DP-2 are connected and those of DP-3 and DP-4 are connected are Fe 4,415,296 tonne with 11.82% of the average Fe grade. The possibility of development of this area based on the estimated resources is low because the ore grade is low.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.113-119
• /
• 2009

The purpose of this study was to compare the tensile bond strength of several self-adhesive resin cements bonded to dentin surfaces with different wet conditions. Three self-adhesive resin cements: Rely-X Unicem (3M ESPE, St. Paul, MN. USA). Embrace Wetbond (Pulpdent. Oakland. MA. USA). Maxcem (Kerr. Orange. CA. USA) were used. Extracted sixty human molars were used. Each self-adhesive resin cement was adhered to the dentin specimens (two rectangular sticks from each molar) in different wet conditions. Tensile bond strength were measured using universal testing machine (EZ Test. Shimadzu corporation. Kyoto. Japan) at a crosshead speed of 1.0mm/min. After the testing. bonding failures of specimens were observed by Operative microscope (OPMI pro, Carl Zeiss. Oberkochen, Germany). T-test was used to evaluate the effect of dentin surface wetness. One-way ANOVA test was used to evaluate the tensile bond strength of self-adhesive resin cements in the same condition. Scheffe's test was used for statistical analyzing at the 95% level of confidence. The result showed that wetness of dentin surface didn't affect tensile bond strength of self-adhesive resin cements and Maxcem showed the lowest tensile bond strength.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.5-16
• /
• 2002

The pullout behavior of large-diameter steel pipe piles(diameter = 2,500mm, length = 38~40m), which were designed as compression piles but used as reaction piles during a static compression load test on a pile(diameter = 1,000m, length = 40m), was investigated. The steel pipe piles were driven by 20m into a marine deposit and weathered soil layer and then socketed by 10m into underlying weathered and soft rock layers. The sockets and pipe were filled with reinforced concrete. The steel pipe and concrete in the steel pipe zone and concrete and rebars in the socketed zone were fully instrumented to measure strains in each zone. The pullout deformations of the reaction pile heads were measured by LVDTs. Over the course of the study, a maximum uplift deformation of 7mm was measured in the heads of reaction piles when loaded to 10MN, and 1mm of residual uplift deflection was measured. In the reaction piles, about 83% and about 12% of the applied pullout loads were transferred in the weathered rock layer and in the soft rock layer, respectively. Also, at an uplift force of 10MN, shear stresses due to the uplift in the weathered rock layer md soft rock layer were developed as much as 125.3kPa and 61.8kPa, respectively. Thus, the weathered rock layer should be utilized as resisting layer in which frictional farce could be mobilized greatly.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.568-574
• /
• 2011

The combination of tailor welded blank (TWB) and hot stamping often offers improved crash-worthiness and reduced mass of stamped parts in the automobile body. To investigate the formability of laser TWB and the reliability of weld line, the present study used 22MnB5 boron steel sheet of the same thickness and used the Erichsen cupping test at elevated temperatures. The effects of laser direction, die temperature, weld line positions and forming speed on formability(the limiting dome height) were studied and the results were compared with the formability of the base material.

• Toxicological Research
• /
• v.27 no.2
• /
• pp.119-123
• /
• 2011

In this research, the genotoxic effect of Picrorrhiza Rhizoma (PR) aqueous extract was evaluated using the mouse micronucleus test. PR extract was administered once a day for 2 continuous days by oral gavage to male ICR mice at doses of 2000, 1000 and 500 mg/kg. Cyclophosphamide was used as a known genotoxic agent in a positive control. The appearance of a micronucleus (MN) in polychromatic erythrocyte (PCE) is used as an index for genotoxic potential, and PCE ratio is used as an index of cytotoxicity. Although significant (p < 0.01) increase of the number of PCE with one or more nuclei (MNPCE) was detected in cyclophosphamide treated groups, no significant increases of MNPCE numbers were observed in all three different dosages of PR extracts treated mice with over 0.39 of the individual polychromatic erythrocyte ratio in all mice used in this study. The results obtained indicated that PR extract shows no genotoxicity effects up to 2000 mg/kg dosing levels.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.21-27
• /
• 1996

Chitosan is a natural polyelectrolytic compound. Researches of adsorption capacity using chitosan have been doing actively. We prepared bead type gel, simple modifier of chitosan, And then experimented adsorption test of heavy metals (Cd etc) using it. According to the result adsorption capacity of chitosan bead was five times higher than chitosan powder. Removal rate of cadmium resulted 90% over in the test that initial concentration of Cd was 100mg/L and bead dosage was 6g/100mL. Adsorption type of heavy metals was similar to general adsorption curve. And optical pH range was 4 - 10 in the adsorption test. In the experiments of other heavy metals (Pb, Zn, Cu, Mn) adsorption types had two stages, highly removal rate-stage at the short time (20minutes) and then slow rate-stage at the after. And removal efficiency at the variable pH ranges revealed relatively good.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.492-500
• /
• 2004

The purpose of this study is localization of safety relief valves fur Nuclear Service through technical development with overall design, fabrication, inspection, capacity certification test and functional qualification test of safety relief valves in accordance with KEPIC MN Code(or ASME Sec.III ). The safely relief valve is the important equipment used to protect the pressure vessel, the steam generator and the other pressure facility from overpressure by discharging the operating medium when the pressure of system is reaching the design pressure of the system. But we're depending on technology of the other country up to the present time. Because we don't have our own technologies, we have been spent the great time and money on installing and repairing safety relief valve at nuclear power plant. Therefore we have to achieve the development of safety relief valves for Nuclear Service with our own technologies.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.3
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.71-76
• /
• 1987

The mutagenicity and desmutagenicity on enzymatic browning reaction products which obtained from prunes salicina (yellow) enzyme and polyphenol compounds were carried out. In the rec-assay on Bacillus subtilis strains H17 and M45, the enzymatic browning reaction products of pyrogallol, hydroxyhydroquinone, 3,4-dihydroxytoluene and catechol of $10^{-2}M$ did not showed mutagenicity. In the effects of various metal ions on the rec-assay, the enzymatic browning reaction products of pyrogallol showed mutagenic activity by $Fe^{3+},\;Mn^{2+},\;Zn^{2+},\;Ni^{2+}$ and $Al^{3+}$. In the enzymatic browning reaction products of hydroxyhydroquinone, $Cu^{2+},\;Mn^{2+}$ and $Pb^{2+}$ were effected in mutagenic action and the enzymatic browning reaction products of catechol was effected in mutagenic action by $Mn^{2+}$. In the DNA-breaking action of enzymatic browning reaction products of pyrogallol, hydroxyhydroquinone, 3,4-dihyroxytoluene and catechol did not show, DNA-breaking action. In the effects of various metal ions on the DNA-breaking action of enzymatic browning reaction products, $Cu^{2+}$ showed DNA-breaking action. In the mutagenicity test on Sal. typhimurium strains TA98 and TA 100 with S-9 mix, 4 kinds of browned substances did sot shove muragenicity, all the browned substances showed strong desmutagenic activity in the presence of benzo $({\alpha})-pyrene$ with S-9 mix.