• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.6-9
• /
• 1997

The study is analyzed the thrust fon:e of moving type Linear DC Motor(MM-LDM). The MM-LDM consists of a stator (platen) and mover (forcer). One of the method for calculating tile thrust of an MM-LDM is to analyze the energy gradient which is determined by the distribution of magnet flux. However, this method is very difficult when used to calculate the thrust force of this kind of LDM. The stored energy in the MM-LDM can be obtained by measuring the self-inductance and mutual-inductance of equivalent circuit of the MM-LOM and this energy gradient gives the thrust. The calculation of thrust force included in this motor shows that the mutual inductance has large influence on the generation of thrust force.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.56-62
• /
• 1999

This paper is concerned with the design and the construction of a moving magnet type linear DC motor(MM type LDM) for instrumentation. A mathematical model for the design of a LDM is developed and a permeance method is used to calculate the effective flux density in the air gap. The flux distribution in the air gap is analyzed and the width of iron core should be determined in order not to saturate the iron core by caluclating maxmum flux density. The design data culculated by a permeance method are compared with the analyzed results using FEM(MAXWELL 2D). The errors between two results are corrected. The tested LDM is constructed using the corrected design data. The results of experiment for thrust characteristics are compared with simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.160-163
• /
• 1999

The thrust force of moving magnet-type linear direct current motors(MM-LDM) is analyzed in this study. A moving magnet-type LDM consists of a stator and a carriage. The stator is composed of two stick shaped electro magnetics and the carriage consists of a movable permanent magnet that is located between the two electromagnets. The method for calculating the thrust force of an MM-LDM is to analyze the energy gradient which is determined by the distribution of magnetic flux. And this paper describes the development of the generalized machine theory for d.c. linear motors and its application to determine the motor parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.598-602
• /
• 2003

In this paper, we propose the method to control the position of LDM(Linear DC Motor) using vision system. The proposed method is composed of a vision system for position detecting, and main computer calculates PID control output which is deliver to 8051 actuator circuit in serial communication. To confirm the usefulness of the proposed method, we experimented about position control of a small size LDM using CCD camera which has a performance 30frames/sec as vision system.

• 제어로봇시스템학회논문지
• /
• 제1권2호
• /
• pp.94-98
• /
• 1995

This paper proposes an optimal design method for the weight and cost of a moving magnet typer linear DC motor (MM-LDM). The optimal design condition such as type and size of MM-LDM were determined by the trinary search algorithm after adjusting a standard function and its related parameters. In order to verigy results of the optimal design by the computer simulation, the designed values such as a thrust, a current, a velocity, and etc. of the fabricated MM-LDM were measured. And the measurement results are in good agreement with the designed ones.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.945-948
• /
• 2003

본 논문에서는 시스템에 발생하는 외란의 영향을 최소로 하기 위해 다층 신경회로망을 이용한 강인 PID 제어 방식을 제안한다. 제안한 방식은 제어 시스템에 발생하는 불특정의 외란을 필터링 하기 위해 다층 신경망을 이용한다. 외란이 포함된 실제 플랜트의 입력을 신경망의 출력으로 보상하여 플랜트를 순수하게 PID 제어기로만 제어하도록 한다. DC 모터에 대한 시뮬레이션과 MM-LDM(Moving Magnetic Linear DC Motor)의 위치제어 실험을 통해 제안한 알고리즘의 유용성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.589-591
• /
• 2004

In this paper, we developed a laser distance measurement(LDM) system based on DSP. We applied PPD(Pulsed Phase Detection) algorithm to the LDM system. The PPD algorithm calculate the distance from the LDM system to the object by using phase detection. Reference waveform at a fixed frequency is sampled by both the inner-loop and outer-loop pulse signal. The LDM system detects the difference of phase between the sampled signals. We obtained an accuracy of ${\sigma}=25.5mm$ from the LDM system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.784-786
• /
• 1995

Variable Structure Control(VSC) scheme with sliding mode is widely used to keep a control system insensitive to parameter variations and disturbances. However, the conventional sliding mode control has the undesired phenomenon of chattering which may become a serious problem. Also the restriction of the sliding mode regime cannot guarantee the insensitivity throughout an entire response. In this paper, the sliding surfaces, which are composed of three-line segments, are used to remove the reaching phase. Also, the concept of fuzzy logic is incorporated with the sliding mode control in order to control the unknown or partially known systems effectively. The proposed method is applied to a Double-Sided MM Type LDM to show its usefulness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.482-484
• /
• 1994

In this paper, to realize high speed position control of LDM (Linear DC Motor), the minimum time control method is applied. But, In this control method, calculation of non-linear function is required Therefore, in order to avoid this complex calculation, optimum switching of the Bang-Bang control is done on parabola type switching function established in the plane of phase. But, the sliding mode is occurred due to the modeling error of LDM and the variation of parameters. Thereby, the optimum 'control is not realized. In order to realize optimum control, the algorithm to modify switching function is proposed

• 대한치과교정학회지
• /
• 제54권1호
• /
• pp.48-58
• /
• 2024

Objective: To quantify the effects of midline-related landmark identification on midline deviation measurements in posteroanterior (PA) cephalograms using a cascaded convolutional neural network (CNN). Methods: A total of 2,903 PA cephalogram images obtained from 9 university hospitals were divided into training, internal validation, and test sets (n = 2,150, 376, and 377). As the gold standard, 2 orthodontic professors marked the bilateral landmarks, including the frontozygomatic suture point and latero-orbitale (LO), and the midline landmarks, including the crista galli, anterior nasal spine (ANS), upper dental midpoint (UDM), lower dental midpoint (LDM), and menton (Me). For the test, Examiner-1 and Examiner-2 (3-year and 1-year orthodontic residents) and the Cascaded-CNN models marked the landmarks. After point-to-point errors of landmark identification, the successful detection rate (SDR) and distance and direction of the midline landmark deviation from the midsagittal line (ANS-mid, UDM-mid, LDM-mid, and Me-mid) were measured, and statistical analysis was performed. Results: The cascaded-CNN algorithm showed a clinically acceptable level of point-to-point error (1.26 mm vs. 1.57 mm in Examiner-1 and 1.75 mm in Examiner-2). The average SDR within the 2 mm range was 83.2%, with high accuracy at the LO (right, 96.9%; left, 97.1%), and UDM (96.9%). The absolute measurement errors were less than 1 mm for ANS-mid, UDM-mid, and LDM-mid compared with the gold standard. Conclusions: The cascaded-CNN model may be considered an effective tool for the auto-identification of midline landmarks and quantification of midline deviation in PA cephalograms of adult patients, regardless of variations in the image acquisition method.