• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1801-1802
• /
• 2006

강우량계는 기상관측 장비중 비가 온 양을 측정하기 위한 장비로 전도형, 저수형, 중량형, 로드셀형 등 다양한 종류의 강우량계가 있다. 전도형 우량계의 경우 단순한 측정방법 및 유지보수의 용이성, 접점방식에 의한 신호의 디지털화 적용성이 우수하기 때문에 가장 널리 사용되고 있다. 전도형 우량계는 분해능에 따라 0.1mm, 0.2mm, 0.5mm, 그리고 1.0mm급으로 분류며, 저수지 관리를 위해 사용되고 있는 우량계는 1.0mm 급을 주로 사용하고 있으며, 보다 정밀하게 측정하기 위하여 0.5mm 급 우량계도 사용하고 있다. 이러한 전도형 우량계의 정확도를 검정하기 위한 방법으로 수자원연구원에 질량측정에 의한 검 교정을 할 수 있는 표준교정시스템이 구축되어 있으며, 이 시스템을 이용하여 0.5mm 및 1.0mm 전도형 우량계에 대하여 강우강도를 20, 40, 60, 80, 100, 120, 140, 160, 180, 200 mm/h로 가변하면서 강우강도의 변화에 따른 분해능이 다른 우량계의 오차특성을 비교 분석하고자 한다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.273-280
• /
• 2014

Purpose : To verify the skin dose in Tomotherapy-based radiation treatment according to the change in tumor locations, skin dose was measured by using Gafchromic EBT3 film and compared with the planned doses to find out the gap between them. Materials and Methods : In this study, to measure the skin dose, I'm RT Phantom(IBA Dosimetry, Germany) was utilized. After obtaining the 2.5mm CT images, tumor locations and skin dose measuring points were set by using Pinnacle(ver 9.2, Philips Medical System, USA). The tumor location was decided to be 5mm and 10mm away from surface of the phantom and center. Considering the attenuation of a Tomo-couch, we ensured a symmetric placement between the ceiling and floor directions of the phantom. The measuring point of skin doses was set to have 3mm and 5mm thickness from the surface. Measurement was done 3 times. By employing TomoHD(TomoHD treatment system, Tomotherapy Inc., Madison, Wisconsin, USA), we devised Tomotherapy plans, measured 3 times by inserting Gafchromic EBT3 film into the phantom and compared the measurement with the skin dose treatment plans. Results : The skin doses in the upper part of the phantom, when the tumor was located in the center, were found to be 7.53 cGy and 7.25 cGy in 5mm and 3mm respectively. If placed 5mm away from the skin in the ceiling direction, doses were 18.06 cGy and 16.89 cGy; if 10mm away, 20.37 cGy and 18.27 cGy, respectively. The skin doses in the lower part of the phantom, when the tumor was located in the center, recorded 8.82 cGy and 8.29 cGy in 5mm and 3mm, each; if located 5mm away from the lower part skin, 21.69 cGy and 19.78 cGy were respectively recorded; and if 10mm away, 20.48 cGy and 19.57 cGy were recorded. If the tumor was placed in the center, skin doses were found to increase by 3.2~17.1% whereas if the tumor is 5mm away from the ceiling part, the figure decreased to 2.8~9.0%. To the Tomo-couch direction, skin doses showed an average increase of 11% or over, compared to the planned treatment. Conclusion : This study found gaps between planned skin doses and actual doses in the Tomotherapy treatment planning. Especially to the Tomo-cocuh direction, skin doses were found to be larger than the planned doses. Thus, during the treatment of tumors near the Tomo-couch, doses will need to be more accurately calculated and more efforts to verify skin doses will be required as well.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.104.6-104
• /
• 2002

$\textbullet$ Contents 1 Introduction $\textbullet$ Contents 2 300mm OHT System $\textbullet$ Contents 3 function of OHT System $\textbullet$ Contents 4 Control Method $\textbullet$ Contents 5 Conclusion

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.409-415
• /
• 2011

Purpose: To design applied anamorphic lens that focal length ratio is 3:1 optical system to improve detecting distance. Methods: We defined a boundary condition as $50^{\circ}{\sim}60^{\circ}$ for viewing angle, horizontal direction 36mm, vertical direction 12 mm for focal length, f-number 4, $15{\mu}m{\times}15{\mu}m$ for pixel size and limit resolution 25% in 33l p/mm. Si, ZnS and ZnSe as a materials were used and 4.8 ${\mu}m$, 4.2 ${\mu}m$, 3.7 ${\mu}m$ as a wavelength were set. optical performance with detection distance, narcissus and athermalization in designed camera were analyzed. Results: F-number 4, y direction 12 mm and x direction 36 mm for focal length of the thermal optical system were satisfied. Total length of the system was 76 mm so that an overall volume of the system was reduced. Astigmatism and spherical aberration was within ${\pm}$0.10 which was less than 2 pixel size. Distortion was within 10% so there was no matter to use as a thermal optical camera. MTF performance for the system was over 25% from 33l p/mm to full field so it was satisfied with the boundary condition. Designed optical system was able to detect up to 2.9 km and reduce a diffused image by decreasing a narcissus value from all surfaces except the 4th surface. From sensitivity analysis, MTF resolution was increased on changing temperature with the 5th lens which was assumed as compensation. Conclusions: Designed optical system which used anamorphic lens was satisfied with boundary condition. an increasing resolution with temperature, longer detecting distance and decreasing of narcissus were verified.

• KIEAE Journal
• /
• v.7 no.2
• /
• pp.71-76
• /
• 2007

For the many years the children's running noise has caused perpetual frictions between neighbors in apartment houses. For this reason the government established a regulation to reduce the floor impact noise, as a result almost all apartment houses have been enforced to use the floor structure with 210mm thickness concrete slab and 120mm thickness of floor heating system since July 2005. If do not want to apply this kind of system, a system which obtain the certification from the institution appointed by government must be applied. In this reason a lot of construction material companies and construction companies have been trying to develop the system with 180mm thickness concrete slab for the purpose of reducing the cost. To develop the optimized floor system, actual size test building were constructed and the materials related with reducing floor impact noise were composited and tested in the test building. Through this procedure the most effective system was found.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.529-540
• /
• 1994

Rapidly progressive periodontitis is known to be usually associated with systemic problems and improved with antibiotic therapy. Recent experiments in which bioresorbable polycaprolactone was polymerized with minocycline has shown that the system released effective antibiotic concentration during the 7 days' period. This clinical trial was to compare the efficacy of a minocycline film(poly-caprolactone+polyglycol+10% minocycline) insertion plus supragingival scaling(MS) or subgingival scaling & root planing(MSRP) with the scaling(S) or subgingival scaling & root planing alone(SRP), at improving the periodontal condition in RPP. Fifteen patients were examined for plaque accumulation, gingival inflammation, probing depth and attachment loss at baseline, then 1, 2, 4 and 8 weeks after 4 treatment regimens were randomly undergone in 4 comparable sites(PD>5mm, LA>3mm) in each subject. Results revealed statistically significant treatement effect with a reduction in a probing depth in SRP(2.0mm), MS(1.8mm), and MSRP(2.1mm). There was no significant reduction in the supragingival scaling alone group(0.6mm). Similarly, attachment levels were significantly improved in the SRP(1.5mm), MS(2.0mm) and MSRP(2.0mm) groups. Net % BOP reduction at 8 week compared to baseline was 6.7% (S), 26.7% (MS), 26.7% (SRP), and 33.3% (MSRP). MSRP produced the greatest improvement in BOP at 8 week. This data suggests that a subgingival minocycline delivery system as a adjunct to scaling alone or scaling & root planing may produce significant clinical benefits over scaling alone in rapidly progressive periodontitis patients.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.148-153
• /
• 2018

This paper proposes a single-input multiple-output (SIMO) self-resonant wireless power transmission system for transmitting power to multiple receivers and the characteristics are simulated and measured. A 600 mm diameter transmission single loop, a 600 mm diameter helical transmission resonant coil, an external diameter 900 mm planar spiral reception resonant coil, and an $80{\times}60mm^2$ flat plate square coil as a receiver are used to form a wireless power transmission system 600 mm away with the table structure. For optimal characteristics, the wireless power transmission coils are designed by EM simulation and equivalent circuit analysis, and the characteristics are simulated and measured. The variation of the efficiency with distance from the center of the spiral resonant coil is analyzed and the measured efficiency is 57% for one receiver and for the two receivers, the efficiency is 37% for each receiver.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.70-72
• /
• 2011

In this paper, Dual-band monopole antenna for MIMO system is proposed. At this time the FR-4 substrate was used as a dielectric is 4.4, the size of 83mm * 50mm * 1.6mm size 3mm, the width of the proposed antenna by a $50{\Omega}$ microstrip line feed, and, LTE in the frequency 746-787MHz, 1710-1755MHz has been designed to operate at the resonant frequency less than-10dB and showed a good return loss in the operation.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.92-97
• /
• 2002

A real-time OTF (optical transfer function) measuring system with on- and off-axis nodal slide bench type for the camera lens is fabricated and evaluated. It consists of a nodal slide bench including a T-bar for the OTF measurement of an off-axis object, two dimensional CCD (charge coupled device) with pixel of 9.9${\mu}{\textrm}{m}$$\times$9.6${\mu}{\textrm}{m}$ for real-time OTF measurment, and a collimating lens of focal length of 300 mm for the optimization of this system. The OTF system is corrected by using the OTF of a SIRA lens of fnumber of F/8 and focal length 50 mm. In order to confirm the reliability of the OTF system, two MTFs (modulus transfer functions) of CCTV & VIDEO lens (JAPAN, AVENIR-SE 2514) of focal length of 25mm and field of view 10.6$^{\circ}$are measured by the camera bench type OTF system of reference OTF system and the nodal slide bench type OTF system and compared with each other. As a result, these two values are agree well with each other within 4% from 0 1p/mm to 100 1p/mm.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.471-489
• /
• 1998

For the successful endodontic treatment, root canal should be cleaned thoroughly by accurate mechanical and chemical canal preparation and sealed completely with canal filling material without damaging the periapical tissues. The accuracy of the root canal length measurement is a prerequisite for the success of the endodontic treatment, and the root canal length is often determined by the standard periapical radiographs and digital tactile sense. In this study, the accuracy and the clinical usefulness of Digora/sup (R)/, an intraoral digital imaging processor and the conventional standard radiographs were compared by measuring the length from the top of the file to the root apex. 30 single rooted premolars were invested in a uniformly sized blocks and No.25 K-file was inserted into and fixed in each canal. Each block was placed in equal distance and position to satisfy the principle of the bisecting angle and paralleling techniques and Digora/sup (R)/ system's image and standard periapical radiographs were taken. Each radiograph was examined by 3 different observers by measuring the length from top of the file to the root apex and each data was compared and analyzed. The results were as follows; 1. In the bisecting angle technique, the average difference between the Digora/sup (R)/ system and standard periapical radiograph was 0.002 mm and the standard deviation was 0.341 mm which showed no statistically significant difference between the two systems(p>0.05). Also, in the paralleling technique, the average difference between these two system was 0.007 mm and the standard deviation was 0.323 mm which showed no statistically significant difference between the two systems(p>0.05). 2. In Digora/sup (R)/ system, the average difference between the bisecting angle and paralleling technique was -0.336 mm and the standard deviation was 0.472 mm which showed a statistically significant difference between the two techniques(p<0.05). Also, in the standard periapical radiographs, the average difference between the bisecting angle and paralleling technique was 0.328 mm and the standard deviation was 0.517 mm which showed a statistically significant difference between these two techniques(p<0.05). 3. In Digora/sup (R)/ system and the standard periapical radiographs. there was a statistically significant difference between the measurement using the bisecting angle technique and the actual length(p<0.05), But there was no statistically significant difference between the measurement using the paralleling technique and the actuallength(p>0.05). In conclusion. the determination of the root canal length by using the Digora/sup (R)/ system can give us as good an image as the standard periapical radiograph and using the paralleling technique instead of the bisecting angle technique can give a measurement closer to the actual canal length. thereby contributing to a successful result. Also. considering the advantages of the digital imaging processor such as decreasing the amount of exposure to the patient. immediate use of the image. magnification of image size. control of the contrast and brightness and the ability of storing the image can give us good reason to replace the standard periapical radiographs.