• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.3
• /
• pp.134-138
• /
• 2009

We present a flash memory system with low cost and high performance for solid-state disk. The proposed flash system is constructed as a SLC with hot blocks and a MLC with cold blocks. Either the SLC or the MLC is selectively accessed on the basis of a position bit in a mapping table. Our results show that the system enables the SLC size to be reduced by about 80% relative to a conventional SLC while maintaining similar performance. And also, our system can improve a performance by above 60% comparing with a conventional MLC.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.898-903
• /
• 2001

In this study, we investigated amounts, distributions and sizes of pores of multilayer piezoelectric transformer, and predicted heat emission property and electrical characteristics according to designs of internal electrode. Forming densities of device having MLC, fingered and full filled internal electrode structure were 4.73 g/㎤, 4.80 g/㎤, 4.82 g/㎤ and forming porosities were 17.3737%, 13.1475%, 12.6121%, respectively. And sintered densities of MLC structured, fingered and full filled devices were 7.76 g/㎤, 7.75 g/㎤, 7.84 g/㎤ and sintered porosities were 4.0967%, 2.7132%, 2.5317%, respectively. Therefore, we concluded that fingered and full fi1led internal electrode devices, expecially, fingered internal electrode devices had cost-effective effect and maximum poling effect due to higher sintered density and lower porosity than MLC structured device. Also we can predict that they have an effect on good heat emission and high output properties of multilayer piezoelectric transformer.

• Journal of Gastric Cancer
• /
• v.15 no.3
• /
• pp.183-190
• /
• 2015

Purpose: The Lauren classification system is a very commonly used pathological classification system of gastric adenocarcinoma. A recent study proposed that the Lauren classification should be modified to include the anatomical location of the tumor. The resulting three types were found to differ significantly in terms of genomic expression profiles. This retrospective cohort study aimed to evaluate the clinical significance of the modified Lauren classification (MLC). Materials and Methods: A total of 677 consecutive patients who underwent curative gastrectomy from January 2005 to December 2007 for histologically confirmed gastric cancer were included. The patients were divided according to the MLC into proximal non-diffuse (PND), diffuse (D), and distal non-diffuse (DND) type. The groups were compared in terms of clinical features and overall survival. Multivariate analysis served to assess the association between MLC and prognosis. Results: Of the 677 patients, 48, 358, and 271 had PND, D, and DND, respectively. Their 5-year overall survival rates were 77.1%, 77.7%, and 90.4%. Compared to D and PND, DND was associated with significantly better overall survival (both P<0.01). Multivariate analysis showed that age, differentiation, lympho-vascular invasion, T and N stage, but not MLC, were independent prognostic factors for overall survival. Multivariate analysis of early gastric cancer patients showed that MLC was an independent prognostic factor for overall survival (odds ratio, 5.946; 95% confidence intervals, 1.524~23.197; P=0.010). Conclusions: MLC is prognostic for survival in patients with gastric adenocarcinoma, in early gastric cancer. DND was associated with an improved prognosis compared to PND or D.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.93-100
• /
• 2017

Purpose: A purpose of this study was to compare dose of junction between breast and SCL fields in radiation therapy by MLC located at the junction. Materials and Methods: With 6 MV of 21EX-S equipped with 120-leaf Millennium MLC, treatment plans were designed with 30 patients who underwent radiation therapy using TFT. Plan 1 where the MLC was all used at the junction. In plan 2 and plan 3, MCLs were retracted 5 mm from breast and SCL, respectively. Plan 4 with all of MLC retracted at the junction were designed. In all of the plans, collimator angle for SCL field was divided into $0^{\circ}$ and $270^{\circ}$. To verify junction dose, the dose at 3cm depth of junction was compared with average value by MapCHECK. Results: In case of the SCL field with $0^{\circ}$ collimator angle, average value of D3cm was 4131.1, 4215.9, 4351.4, and 4423.0 cGy. In case of the SCL field with $270^{\circ}$ collimator angle, average value of D3cm was 4044.3, 4246.7, 4291.1, and 4441.2 cGy. In plan1 and 3, change in average dose depending on collimator angle was changed more significantly than paln2 and 4. Dose measured at 3cm depth of junction was similar to treatment plan. Conclusion: In radiation therapy plan for breast cancer with SCL, retracting MLCs from junction between breast and SCL fields will lead to decrease effect of dose of the junction.

• The Korean Journal of Pharmacology
• /
• v.31 no.3
• /
• pp.291-297
• /
• 1995

The objectives of this study is to compare the inhibitory mechanism of sodium nitroprusside and forskolin on the phorbol ester, activator of protein kinase C (PKC), -induced contractions in rat aorta. $0.1\;{\mu}M$ phorbol dibutyrate (PDBu) induced sustained contractions and increased phosphorylations of myosin light chain (MLC) time-dependently. At 30 min, the contractions and phosphorylations of MLC by PDBu were augmented maximally and remained constant. Moreover, $^{45}Ca^{2+}$ uptake was increased 30 min after PDBu stimulation from resting values. Sodium nitroprusside which activates guanylyl cyclase followed by increasing cGMP, inhibited the PDBu-induced contractions concentration-dependently. On the other hand, forskolin which activates adenylyl cyclase followed by increasing cAMP, also inhibited the PDBu-induced contractions concentration-dependently. However, sodium nitroprusside was more potent to inhibition of the PDBu-induced contractions than forskolin. Sodium nitroprusside inhibited $^{45}Ca^{2+}$ uptake by PDBu stimulation. Forskolin also inhibited $^{45}Ca^{2+}$ uptake by PDBu stimulation. Sodium nitroprusside and forskolin inhibited the phosphorylations of MLC by PDBu, respectively. However, sodium nitroprusside was more potent to inhibition of phosphorylations of MLC by PDBu than forskolin. From these results, Sodium nitroprusside via cGMP or forskilin via cAMP may reduce myoplasmic $Ca^{2+}$ followed by suppression of phosphorylations of MLC of PKC-mediated contractions, which results in vasodilation. However, cGMP may play a role more importantly than cAMP on the regulation of protein kinase C-mediated contraction in vascular smooth muscle.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1993

The purpose of this study is to investigate the elution behavior of monosubstituted phenols and benzenes in micellar liquid chromatographic system, $C_{18}$ column-anionic surfactant, sodium dodecyl sulfate(SDS). The partition coefficients between the micellar pseudophase-water and modified stationary phase-water are calculated by the relationship between solute retention and micellar mobile phase(SDS) composition. The free energy of transfer of solute from water to micelle is also calculated from these values. There is a direct correlation between the hydrophobicity parameters in MLC and corresponding partition data for 1-octanol-water, which indicates that the hydrophobicity of molecules plays an important role in the partition for both systems and that quantitative structure activity relationships(QSAR) are available from studies on micellar partition. The other purpose of this study is to investigate methylene selectivity of alkyl homologous series through correlation between retention and the number of carbons. The correlation between hydrophobicity parameters in MLC and 1-octanol-water partition data was also observed when n-propanol was as a modifier in the mobile phase.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.961-966
• /
• 2003

A Multi-Layer Ceramic (MLC) chip type Band-Pass Filter (BPF) using BiNb$\_$0.975/Sb$\_$0.025/ $O_4$ LTCC (Low Temperature Co-fired Ceramics) and MLC processing is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coupled stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The attenuation pole depends on the coupling between resonators and the coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the manufactured BPF is well acceptable for IMT-2000 application.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.305-312
• /
• 2014

Purpose : The purpose of this study is to analyze the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC) and determine the appropriate period of quality assurance (QA). Materials and Methods : The quality assurance of the DMLC equipped with Millennium 120 leaves has been performed total 92 times from January 2012 to June 2014. The the accuracy of leaf position and isocenter coincidence for MLC were checked using the graph paper and Gafchromic EBT film, respectively. The stability of leaf speed was verified using a test file requiring the leaves to reach maximum leaf speed during the gantry rotation. At the end of every leaf speed QA, dynamic dynalog files created by MLC controller were analyzed using dynalog file viewer software. This file concludes the information about the planned versus actual position for all leaves and provides error RMS (root-mean square) for individual leaf deviations and error histogram for all leaf deviations. In this study, the data obtained from the leaf speed QA were used to screen the performance degradation of leaf speed and determine the need for motor replacement. Results : The leaf position accuracy and isocenteric coincidence of MLC was observed within a tolerance range recommanded from TG-142 reports. Total number of motor replacement were 56 motors over whole QA period. For all motors replaced from QA, gradually increased patterns of error RMS values were much more than suddenly increased patterns of error RMS values. Average error RMS values of gradually and suddenly increased patterns were 0.298 cm and 0.273 cm, respectively. However, The average error RMS values were within 0.35 cm recommended by the vendor, motors were replaced according to the criteria of no counts with misplacement > 1 cm. On average, motor replacement for gradually increased patterns of error RMS values 22 days. 28 motors were replaced regardless of the leaf speed QA. Conclusion : This study performed the periodic MLC QA for analyzing the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC). The leaf position accuracy and isocenteric coincidence showed whthin of MLC evaluation is observed within the tolerance value recommanded by TG-142 report. Based on the result obtained from leaf speed QA, we have concluded that QA protocol of leaf speed for DMLC was performed at least bimonthly in order to screen the performance of leaf speed. The periodic QA protocol can help to ensure for delivering accurate IMRT treatment to patients maintaining the performance of leaf speed.

• Progress in Medical Physics
• /
• v.14 no.3
• /
• pp.151-160
• /
• 2003

The application of more complex radiotherapy techniques using multileaf collimation (MLC), such as 3D conformal radiation therapy and intensity-modulated radiation therapy (IMRT), has increased the significance of verifying leaf position and motion. Due to thier reliability and empirical robustness, quality assurance (QA) of MLC. However easy use and the ability to provide digital data of electronic portal imaging devices (EPIDs) have attracted attention to portal films as an alternatives to films for routine qualify assurance, despite concerns about their clinical feasibility, efficacy, and the cost to benefit ratio. In this study, we developed method for daily QA of MLC using electronic portal images (EPIs). EPID availability for routine QA was verified by comparing of the portal films, which were simultaneously obtained when radiation was delivered and known prescription input to MLC controller. Specially designed two-test patterns of dynamic MLC were applied for image acquisition. Quantitative off-line analysis using an edge detection algorithm enhanced the verification procedure as well as on-line qualitative visual assessment. In conclusion, the availability of EPI was enough for daily QA of MLC leaf position with the accuracy of portal films.

• Progress in Medical Physics
• /
• v.26 no.3
• /
• pp.153-159
• /
• 2015

This study is to evaluate thedosiemtric leaf gap (DLG) at different depths for dynamic intensity-modulated radiation therapy (IMRT) in order to evaluate the absolute dose and dose distribution according to the different positions of tumors and compare the measured and planned the multileaf collimator (MLC) transmission factor (T.F.) and DLG values. We used the 6 MV and 15 MV photon beam from linear accelerator with a Millenium 120 MLC system. After the import the DICOM RT files, we measured the absolute dose at different depths (2 cm, 5 cm, 10 cm, and 15 cm) to calculate the MLC T. F. and DLG. For 6 MV photon beam, the measured both MLC T. F. and DLG were increased with the increase the measured depths. When applying to treatment planning systemas fixed transmission factor with its value measured under the reference condition at depth of 5 cm, although the difference fixed and varied transmission factor is not significant, the dosiemtric effect could be presented according to the depth that the tumor is placed. Therefore, we are planning to investigate the treatment planning system whichthe T. F. and DLG factor according to at the different depths can be applied in the patient-specific treatment plan.