• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.151-155
• /
• 2003

The abrasion behavior of three kinds of warp knitted fabrics, which are normally used for upper sole of footwear, was evaluated. We measured the changes of mechanical and structural properties of each sample as abrasion cycle increased. Each sample showed similar trends in compression and surface properties but there were significant differences in abrasion rate among the samples. The mechanical properties showed remarkable differences with directions. The frictional coefficient (MIU) of fabric surface increased at the beginning of abrasion and decreased as abrasion cycles increased. The weight and thickness of the fabric linearly decreased with abrasion cycles. The surface roughness (SMD) and the compressional resilience (RC) decreased as abrasion cycles increased while compressional energy (WC) increased.

• Fashion & Textile Research Journal
• /
• v.3 no.2
• /
• pp.174-179
• /
• 2001

This study investigated the effect of aftertreatments such as using the softener or starch on the mechanical properties of knitted fabrics. The mechanical properties of fabrics, hand value(HV) and total hand value(THV) were measured and calculated by the KES-F system. The main results are as follows: The values of tensile energy(WT), coefficient of friction(MIU) and geometrical roughness(SMD) were increased by softener but decreased by starch treatment. However, the values of tensile linearity(LT), bending(B, 2HB), thickness(T) and weight(W) were increased by starch but decreased by softener treatment. Tensile resilience(RT) was increased not only by softener but also by starch treatment. It showed that the levels of FUKURAMI, NUMERI and SOFUTOSA were increased by the treatment of softener and the levels of KOSHI and SHARI were increased by the treatment of starch. Total hand value(THV) was lower in fabric with starch treatment than fabric with none treatment.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.53-56
• /
• 1997

본 연구에서는 폴리에스테르와 실크 블라우스 직물 6종을 사용하여 직물에 대한 선호 감각을 분석하고, 이러한 감각 속성들을 정향화 하기 위한 직물의 물리적 요소들을 규명하고자 하였다. 선행연구에서 추출된 감각들이 어떤 인과관계의 경로를 거쳐 최종 선호감성에 영향을 주는지 파악하기 위해 감각의 구성차원 모형을 검증하였다. 고온 다습한 환경에서 선호감각이 촉감에 영향을 받으며 촉감은 직물의 표면특성감과 습윤감이 중요한 1차적 감각이었다. 태는 유연감에 영향을 받는 복합적 감각이었으나 최종 구매시 선호감에는 유의한 영향을 미치지 않았다. 관련 표면 불성 변인으로는 영상처리를 통한 fractal차원과 총접촉면적이 SMD, MIU 및 MMD보다 더 높은 상관을 나타내었다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.03a
• /
• pp.271-276
• /
• 1999

This study was carried out to investigate the relationship between sound color and physical propertiessuiting fabrics. Rustling sounds of 23 suiting fabrics by sound generator developed for this study were recorded and analysed through FFT analysis. Three sound color factor(ΔL Δf. LPT) were obtained.Physical properties of specimens were measured by KES-FB. Level range(L) showed significant correlation with tensile resilience(RT) and thickness (T). Frequency difference(Δf) showed significant correlation with tensile linearity(LT), shear properties(G, 2HG, 2HG5), compressional energy(WC), and weight(W). Total sound pressure (LPT) showed significant correlation with elongation at maximum load (EM), tensile linearity(LY), and tesile energy(WT). By stepwise regression LPT was found to be explained by EM, MIU, RC, LT significantly.

• Science of Emotion and Sensibility
• /
• v.2 no.1
• /
• pp.157-168
• /
• 1999

슈트용 직물을 대상으로 직물이 스치는 소리를 재현하여 이를 녹은하고 FFT 분석을 통하여 얻은 음향 스펙트럼을 기초로 음색을 정량화할 수 있는 요인을 개발하여, 음색 요인과 KES system에 의해 측정한 직물의 물리적 성진 간의 관계를 고찰하고자 하였다. 직물 소리의 음향 스펙트럼을 기초로 하여 최고 음압과 최저 음압의 차이인 ΔL과 최고와 최저 음압에 해당되는 주파수 간 차이인 Δf, 총음압 LPT의 세가지 요인을 음색 요인으로 정하여 각 직물의 음색 요인 값을 추출하였고, KES를 이용하여 각 직물의 17개의 물리적 성질의 수치를 구하였다. 세 가지 음색 요인과 직물의 물리적 성질 간의 상관관계에서 ΔL은 직물의 인장 회복력과 두께와 유의적인 상관관계를 Δf는 직물의 인장 선형성화 전단성질, 압축에너지, 무게와 유의적인 상관관계를 보이며, LPT는 최대하중시 신장성, 인장 선형성, 인장 에너지와 유의적인 상관관계를 보이는 것으로 나타났다. 세 가지 음색 요인과 직물의 물리적 성질 간의 단계별 희귀관계에서는 LPT가 직물의 물리적 성직(EM, MIU, RC, LT)에 의해 가장 잘 설명되는 것으로 나타났다. 이와 같은 결과를 바탕으로 본 연구에서 시도한 절량화된 음색은 직물의 물리적 성질과 유의한 관계를 가짐을 확인하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.147-148
• /
• 2016

The purpose of this paper is to investigate the diffusion process of mobile internet use in Korea and to explore the determinants driving MIU. A survey was conducted to collect data to empirically assess the research model. In total, 543 usable responses were collected using a questionnaire derived from previous research. Both the structural equation model and partial least squares were used to study the model concerning different user groups. Findings, The results indicate that there are significant differences in the users' perceptions of mobile internet usage during its different innovation diffusion stages. Of the determinants, perceived enjoyment is the most important predictor of mobile internet use. In addition to motivating users by making services more enjoyable, the findings suggest that practitioners should take the differences of adopter groups into account. Making the mobile internet easy to use and compatible with users' lifestyles would promote the use of technology as well.

• Science of Emotion and Sensibility
• /
• v.20 no.4
• /
• pp.55-64
• /
• 2017

This study was performed to help the denim fabric planning which reflects the sensibility preference of university students. Objective characteristics, like color properties and mechanical properties, in 8 denim fabrics (5 cotton 100% fabrics and 3 cotton/polyurethane blended fabrics) were evaluated. And the color preference, subjective sensation and tactile preference of denim fabrics were investigated among the university students. The effect of color preference and tactile preference of denim fabrics on the purchase preference of denim slacks was also examined. Color preference of denim fabrics showed a significant difference according to the kind of denim fabrics. University students preferred purple blue denim fabrics that was measured low $-b^*$ value and low $C^*$ value among the color properties of denim fabrics. Among the mechanical properties of denim fabrics, surface property like MMD, MIU and SMD as well as shear property like 2HG5 were important elements affecting subjective sensation. While, tactile preferences showed a significant difference according to the fabrics. The tactile preferences of cotton/polyurethane blended denim fabrics was highly preferred, and that of heavy 100% cotton denim fabric was lowly preferred. And the subjective sensation affecting tactile preferences were in order of smoothness, softness, lightness. It is concluded that the color preference and tactile preference influenced upon the purchase preference of denim slacks, and color preference had a bigger effect upon the purchase preference.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.12
• /
• pp.1368-1373
• /
• 2003

본 연구에서는 견직물에 강경한 촉감을 부여하여 한복지 뿐만 아니라 현대의 패션경향에도 부합되는 소재를 개발하고자 하였다. 견직물에 강경성을 부여하기 위하여 의마가공용 폴리우레탄 수지를 이용하여 수지농도와 큐어링온도에 따른 수지부착율을 조사하였고, 여기에 수반되는 물리적 특성의 변화를 살펴보았다. 또한 가공된 견직물의 세탁에 대한 내구성도 살펴보아 동시에 실용가능성도 검토하였다. 이상의 연구를 통해 다음과 같은 결과를 얻었다. 1. 의마가공용 폴리우레탄 수지를 견직물에 처리할 경우 수지 농도가 증가할수록 수지 부착량이 증가하였다. 2. 열처리온도를 변화시켜 수지부착량의 변화를 살펴본 결과 열처리 온도가 증가할수록 수지의 부착량이 감소하여 본 실험에 사용된 수지의 적정 열처리 온도가 160-18$0^{\circ}C$인 것을 고려해 볼 때 견직물의 경우 17$0^{\circ}C$의 열처리 온도가 적절한 것으로 나타났다. 3. 수지 처리된 견직물의 역학적 특성치의 변화를 살펴본 결과 RT, EM, MIU값은 감소하는 경향을 가지며, LT, B, 2HB, G, 2HG, 2HG5값은 증가하는 경향을 나타내어 폴리우레탄 수지처리로 의마가공 효과를 갖는 견직물을 얻을 수 있었다. 4. 수지 처리된 견직물의 역학적 특성치는 물세탁 후에도 크게 변화가 없어 세탁에 대한 내구성을 지니고 있는 것으로 나타났다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.800-808
• /
• 1999

The demand for PU coated synthetic leather is increasing as a high fashion material. But it has some faults of water vapor permeability surface tacky property and static electricity. Therefore the purpose of this study was the produce of PU coated fabric added collagen with hydrophilic property and soft touch. In the PU coated fabric water vapor permeability water vaper absorption and frictional electronic voltage were investigated surface bending and compression properties were also examined by the use of KES-FB System. The followings were the results of this study. 1. There was no Cr in the collagen so that Cr was not treated in the collagen. 2. The surface and cross sectional layer of PU coated fabric with collagen were highly developed by micro porous structure. 3. The water vapor permeability of PU coated fabric was increased as collagen concentration increased. 4. The water vapor absorption of PU coated fabric was increased as collagen concentration increased. 5. The frictional electronic voltage of PU coated fabric was decreased in accordance with the increase of collagen concentration. Especially it effectively decreased by the use of only 5% collagen concentration. 6,. The bending and compression properties of PU coated fabric were increased in accordance with the increase of collagen concentration so that it became stiff. 7. The Value of MIU, SMD was decreased in accordance with the increase of collagen concentration so that the PU coated fabric became smooth.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.439-444
• /
• 2005

This article describes the change in the hand value of chitosan-crosslinked cotton fabrics. The chitosan-crosslinked cotton fabrics were manufactured by mercerizing process using epichlorohydrin(ECH), 2% aqueous acetic acid and 20% aqueous sodium hydroxide. It proposed that the crosslinking and mercerizing were performed with the mixture of four different molecular weight chitosan and ECH in a single step. Cotton fabrics were dipped in the mixed solution of chitosan and ECH, picked up by mangle roller, pre-dried at $130^{\circ}C$, mercerized and crosslinked in NaOH solution and finally washed and dried. Mechanical and physical properties of the chitosan crosslinked fabric were measured on concentration and molecular weight by Kawabata Evaluation System(KES) and other instruments. As the concentration of chitosan solution increased, LT, WT, B, 2HB were increased. WT, B, 2HB, MIU, SMD, $T_0$, $T_m$ were decreased when chitosan was depolymerized. On the other hand, RT was increased when chitosan was depolymerized.