• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.152-155
• /
• 2006

Carbon nitride ($CN_X$) films were prepared by reactive RF magnetron sputtering system at various deposition conditions and the C-V characteristics of MIS(metal - insulator - semiconductor) capacitors that have the structures of Al/$CN_x$/p-Si/Al and Al/$CN_x$/$Si_3N_4$/p-Si/Al were investigated. The resistivity of carbon nitride was above $2.40{\times}10^8{\Omega}{\cdot}cm$ at room temperature. The C-V plot showed a typical capacitance-voltage characteristics of semiconductor insulating layers, while it showed hysterisis due to interface charges. Amorphous carbon nitride (a-$CN_x$) films, that have relatively high resistivity and low dielectric constant could be useful as interlayer insulator materials of VLSI(very large-scale integration) and ULSI(ultra large-scale integration).

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.2
• /
• pp.55-67
• /
• 2019

This study tries to reveal and compare uplift rates in the southern coast of the Korean Peninsula, based on absolute ages from coastal terrace on the coast. The uplift rate in the East Coast from previous study ranges from 0.258 to 0.357 m/ka with a median rate of 0.262 m/ka and shows an increase trend from north to south. Median uplift rate of 0.082 m/ka with minimum and maximum rates of 0.053 m/ka and 0.127 m/ka, respectively, is calculated in the South Coast from previous and this studies. The uplift rate in the West Coast from 3 absolute ages in this study is 0.082~0.112 m/ka with a median rate of 0.090 m/ka. Based on these uplift rates in the southern coast of the Korean Peninsula, it can be concluded that since MIS 5, the East Coast has experienced 3 to 4 times faster uplift rate than the West and South Coasts. However, this study suggests that more discussion on whether these uplift rates are long-term tectonic movement associated with tilted warping movement since the Tertiary or short-term tectonic movement associated with isostatic rebound due to sea level change since the Last Interglacial is needed.

• Journal of the Korean earth science society
• /
• v.33 no.1
• /
• pp.1-10
• /
• 2012

Analysis on high-resolution seismic and core data reveals that the sedimentary strata in Gyeonggi Bay consists of four sedimentary units (Unit I-IV, from top to bottom) formed during the late Quaternary period. Unit I is interpreted as sediments of tidal flat and channel-fill deposits, formed during the Holocene transgression. Unit II is divided into shallow-marine facies unit in offshore area and channelized fluvial to estuarine facies unit in nearshore sand ridge and tidal flat. Unit III is considered as tidal flat deposits with the uppermost severely weathered and oxydized layers. This unit is composed of shallow marine sedimentary successions formed during the MIS-5 highstand. The lowermost Unit IV rests on Mesozoic basement rocks, considered as the shallow marine and shelf deposits formed before the MIS-5 lowstand.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.187-197
• /
• 1999

해양수산부가 개발 .운영 중인 항만운영정보시스템(PORT-MIS)은 선박입출항 관련 업무, 수출입 화물 반출입에 관한 업무, 항만시설물관리에 관한 업무, 의사결정지원시스템에 관한 업무 등 크게 4개 업무오 구성되어 있으며, 총 19개의 전자문서와 1,500여개의 단위 프로그램으로 구성되어 있다. 그동안 PORT-MIS를 권역별로 확대 운영하면서 발생한 여러 가지 문제점들을 보완하기 위해 해양수산부와 정보통신부(한국전산원)가 공동으로 $\ulcorner$수출입화물 일괄처리시스템 구축$\lrcorner$ 용역 사업을 현재 진행 중에 있다. 본 연구는 용역과업 내용에 포함되어 있지 않으면서 개선이 필요한 외항선(국전선.외국전선 포함) 선박입항보고서(최초.변경.최종)와 선박출항보고서(최초.변경.최종), 내항선입.출항신고서, 예선사용허가신청서 및 지정서, 도선사용허가신청서 및 지정서 등의 민원업무를, 사용자로 하여금 최소한의 노력으로 처리할 수 있도록 제출방법을 개선(EDI방식에서 온라인방식으로)하여 행정소요시간을 단축함으로써 PORT-MIS의 효율성을 높일 수 있는 방안을 제시하고자 한다. 이러한 노력을 통해 PORT-MIS EDI업무가 개선되어 선박입.출항보고를 1회롤 처리할 수 있다면 연간 29만9천건의 서류절감으로 약 1억3천7백만원의 물류비를 줄일 수 있으며, 시간 단축에 따른 간접비용을 계산하면 보다 많은 효과가 있다고 판단된다. 그리고 내항선입.출항신고서 및 예.도선업무를 EDI방식에서 온라인방식으로 전환함으로써 선사와 예선업체 및 도선사협회가 대화형식으로 업무처리가 이루어져 분쟁을 최소화 할 수 있다면, 전자문서 31만6천건/년 절감으로 1억3백만원/년의 예산이 절감될 것으로 예상된다.rr로 변화시켰고 inductive power는 200~800watt, bias voltage는 0~-200voltage로 변화시켰으며 식각마스크로는 SiO2를 patterning 하여 사용하였다. n-GaN, p-GaN 층 이외에 광소자 제조시 필수적인 InGaN 층을 100% Cl2로 식각한 경우에 InGaN의 식각속도가 GaN에 비해 매우 낮은 식각속도를 보였다. Cl2 gas에 소량의 CH4나 Ar gas를 첨가하는 경우와 공정압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%Ar 플라즈마에서 공정 압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%CHF3 와 Cl2/10%Ar 플라즈마에서 공정압력을 15mTorr로 감소시키는 경우 InGaN과 GaNrks의 선택적인 식각이 가능하였다. InGaN의 식각속도는 Cl2/Ar 플라즈마의 이온에 의한 Cl2/CHF3(CH4) 플라즈마에서의 CHx radical 형성에 의하여 증가하는 것으로 사료되어 진다.$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다. 기대할 수 있는 여러

• The Korean Journal of Quaternary Research
• /
• v.31 no.2
• /
• pp.13-22
• /
• 2017

The age of the Sorori old fluvial deposits is assumed as old as Last Interglacial(MIS 5) when appying the thalassostatic terrace formation in mid- to downstream Keum river basin, while the young fluvial deposits are interpreted to be formed since the post-LGM(last glacial maximum), including both the Bølling-Allerød (B/A) Interstadial(12,700~14,700 cal-yrBP), and the Younger Dryas Stadial(11,700~12,900 cal-yrBP). The wild rice seed like Oryza rufipogon found in the middle organic muds of the young fluvial deposits dated after about 15,000 cal-yrsBP, when the transition from the subalpine conifer forest to the deciduous broad-leaved forest was conspicuously evidenced in the upper part of OC-2 palynofloral zone of the in Cheonju Sorori site, In particular the OC-2 palynofloral zone ranging towards the upper part of middle organic muds(peaty muds) is interpreted to be formed in the B/A Interstadial. It is regarded that Cheongju Sorori rice seeds are associated with warm palynological evidences and backswamp insects during the Lastest Glacial, showing appearance of relatively warm climate similar to the present.

• Journal of Information Technology and Architecture
• /
• v.10 no.4
• /
• pp.479-496
• /
• 2013

Today, a corporate and the government is making significant investments in informatization in order to enhance competitiveness however, question on the outcome of information-oriented investment has continuously been posed and in order to resolve such problems, the technique of Enterprise Architecture (EA) Despite such fact, in the case of the central administrative institute, even if the EA maturity standard has continuously improved through continuous investment when compared to the past without deviation between institutes, the establishment of EA and the work utilization of EA compared to the management competence still is analyzed to be relatively weak. This study completed the preliminary feasibility study in 2012 for Korea Customs Service which has been appointed as the representative institute that best utilizes EA in the field of information operation and evaluation field in the 2010 EA Maturity Evaluation and it can become a case study that can contribute to more continuous development and improvement of other public institute EA by introducing the performance of EA-based 4th Korean National Customs Information Network which has entered into total reconstruction in 2013 and by identifying the implications of EA performance arising from such.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.3
• /
• pp.1-14
• /
• 2013

This study aims to investigate the formation and sedimentary environment including formative period, grain composition and climate change from loess-paleosol sequence deposited on a gravel bed of river terrace in the Jincheon Basin, Chungbuk Province. The Jincheon section consists downward of a surface layer, loess-paleosol sequence, transitional layer I, transitional layer II and gravel bed. It can be suggested from the OSL age dating that the sequence was deposited during MIS 6 to 4. The sequence can be divided into four horizons based on the variation in the magnetic susceptibility values. Grain size analysis reveals that the sequence indicates similar properties of grain size to loess deposits in Korea and especially, the Y values in the sequence are lower than those in the loess and paleosol horizons in the Chinese Loess Plateau and similar to those in the Red Clay in the Chinese Loess Plateau and Xiashu loess in the lower reaches of the Yangtze River. These Y values in the sequence can be attributed to the remote source and/or experience of intensive weathering process after deposition in the Korean Peninsula.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.38-44
• /
• 1991

본 연구는 전기로에 의한 열 산화법에 의해 SiO$_{2}$(88[.angs.])와 ONO(89[.angs.])를 성장시켜 MIS capacitor를 제작한 후, 초 박막 유전체/실리콘 계면에서 전자파 간섭 효과를 실험적으로 비교 검토한 것이다. EWIE현상의 결과로서 첫째. 저 전계영역에 비해 고 전계영역에서 우세하며 둘째. SiO$_{2}$에 비해 ONO가 약하게 나타난다. 그러므로 ONO가 SiO$_{2}$보다 열 전송자 효과에 대한 저항성이 우수함을 알 수 있고 ULSI급의 게이트 절연막으로서의 실용가능성을 확인하였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.4
• /
• pp.64-73
• /
• 1992

This paper presents the design of multi-level logic optimization algorithm and the development of the SMILE system based on the algorithm. Considering the fanin constraints in algorithmic level, SMILE performs global and local optimization in a predefined sequence using heuristic information. Designed under the Sogang Silicon Compiler design environment, SMILE takes the SLIF netlist or Berkeley equation formats obtained from high-level synthesis process, and generates the optimized circuits in the same format. Experimental results show that SMILE produces the promising results for some circuits from MCNC benchmarks, comparable to the popularly used multi-level logic optimization system, MIS.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.106-115
• /
• 1994

This paper presents the design of a technology mapping system for optimizing delays of combinational and synchronous sequential logic circuits. The proposed system performs delay optimization for combinational logic circuits by remapping, buffering, and gate merging methods through the correct delay calculation in which the loading values are considered. To get time optimized synchronous sequential circuits, heuristic algorithms are proposed. The proposed algorithms reallocate registers by considering the critical path characteristics. Experimental results show that the proposed system produces a more optimized technology mapping for MCNC benchmarks compared with mis-II.