• Membrane Journal
• /
• v.23 no.6
• /
• pp.432-438
• /
• 2013

Mixed-matrix membranes (MMMs) containing MIL-100(Fe), a MOF type, were fabricated in this study. MMMs up to 30 wt% MOF loading were prepared, and their gas permeabilities were tested. $H_2$, $CO_2$, $O_2$, $N_2$, and $CH_4$ gas permeabilities increased with the MOF loading, while $SF_6$, the largest kinetic diameter in this study, exhibited reduction of gas permeability with the loading. Ideal gas selectivity of $N_2/SF_6$ improved by 40% as compared with pure polyimide membrane, suggesting the proposed MMMs were suitable for $N_2/SF_6$ separation.

• Applied Chemistry for Engineering
• /
• v.34 no.4
• /
• pp.455-459
• /
• 2023

Three different optimization studies were conducted for the synthesis of MIL-100(Fe) and MIL-100(Fe)@COF using design of experiments. In the first study, the optimal concentration of precursors was determined using a mixture design method, and a modified molar ratio of 0.4155:0.2664:0.3182 was found to yield the highest crystallinity. In the second study, a central composite design was used to optimize the main factors of synthesis temperature and time with a synthesis temperature of 161℃ and a synthesis time of 12 hours. In the third study, a screening design method was used to determine the effect of five precursors on the formation of MIL-100(Fe)@COF, and the presence of characteristic peaks at 1552, 1483, and 1354 cm^-1 was found to be important for the existence of the COF structure. MIL-100(Fe)@COF synthesized with a modified molar ratio of 0.4831:0.4169:0.1 was predicted to exhibit optimal conditions.

• Journal of Korean Society for Quality Management
• /
• v.24 no.1
• /
• pp.110-125
• /
• 1996

Since 1975, Korean defence quality system has been operated by adopting defence specifications, 0050-0015, 0050-0029 and 0050-0030, which were based on the American specifications, MIL-Q-9858, MIL-Q-45208 and MIL-STD-45662. The trend that the ISO certification is intensively required for the international trade, and the need for modernization of the Korean military forces, however, provide motivation to revise the defence quality system. In this study, an improved defence quality system has been proposed by the comparison study among the requirements prescribed in ISO 9000, AQAP 100 series, MIL-Q-9858.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.4
• /
• pp.100-108
• /
• 2013

In aerospace industry, MTBF (Mean Time Between Failure) and MFTBF (Mean Flight Time Between Failure) are generally used for reliability analysis. So far, especially to Korean military aircraft, MFTBF of avionic equipments is predicted by MIL-HDBK-217 and MIL-HDBK-338, however, the predicted MFTBF by military standard has a wide discrepancy to that of real-world operation, which leads to overstock and increase operation cost. This study analyzes operational data of avionic equipments. Operational MFTBF, which is calculated from operational data, is compared with predicted MFTBF calculated conventionally by military standard. In addition, failure rate trend is investigated to verify reliability growth in operational data, the investigation shows that failure rate curve from operational data has somewhat pattern with decreased failure rate and constant failure rate.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.880-881
• /
• 2005

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.52-62
• /
• 2002

Electrical characteristics of two types of 20 GHz Push-Push GaAs MESFET dielectric resonator oscillators having Wilkinson and T-junction power combiners for the output stage have been investigated. The Push-Push oscillator for suppressing fundamental frequency 10 GHz and enhancing 20 GHz has been designed and realized in microstrip configuration on 20 mil thick RT-Duroid(${\varepsilon}_r$=2.52) teflon substrate. Two different types of power combiners, T-junction and Wilkinson, have been considered. Whenever one type of the combiners has been adopted for the output circuit, output power, phase noise and fundamental frequency suppression characteristics of the oscillator have been measured. When the Wilkinson power combiner was used, a maximum output power of 5.67 dBm, a phase noise of -105.5 dBc/Hz at an offset frequency of 100 kHz and a fundamental frequency suppression of -29.33 dBc have been measured. When the T-junction power combiner was used, a maximum output power of -1.17 dBm, a phase noise of -102.2 dBc/Hz at an offset frequency of 100 kHz and a fundamental frequency suppression of -17.84 dBc have been measured.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.122-131
• /
• 2008

In this paper, an S-band oscillator of the low phase noise property using miniaturized microstrip hairpin shaped ring resonator has been designed and implemented. The TACONIC's RF-35 substrate has a dielectric constant ${\varepsilon}_r$=3.5 a thickness h=20mil a copper thickness t=17 um and loss tangent $tan{\delta}$=0.0025. The designed and implemented 2.45 GHz oscillator shows low phase performance of -100.5 dBc/Hz a 100kHz offset. Output power 20.9 dBm at center frequency 2.45 GHz and harmonic suppression -32 dBc. The circuit was implemented with hybrid technique. But can be fully compatible with the RFIC's, MIC and MMIC due to its entirely planar structure.

• Economic and Environmental Geology
• /
• v.27 no.2
• /
• pp.147-160
• /
• 1994

Copper-bearing hydrothermal vein mineralization of the Samsan area was deposited in two stages (I and II) of quartz-calcite-sulfide veins which fill fissures in Cretaceous volcanic and sedimentary rocks of the Gyeongsang basin. The major ore minerals, chalcopyrite and sphalerite, together with pyrite, galena, hematite, and minor sulfosalts, occur with epidote and chlorite as gangue minerals in stage I quartz veins. Chlorite geothermometry, fluid inclusion and stable isotope data indicate that copper ore was deposited mainly at temperatures between $330^{\circ}C$ and $280^{\circ}C$ from fluids with salinities between 12 and 3 equiv. wt % NaCl. Evidence of fluid boiling indicates a range of pressures from ${\leq}100$ to 200 bars bars. Within ore stage I there was an apparent decrease in ${\delta}^{34}S$ values of $H_{2}S$ with paragenetic time, from 8.0 to 2.3 per mil. This pattern was likely achieved through progressive increases in activity of oxygen accompanying boiling and mixing. In the early part of the first stage, the high temperature, high salinity fluids gave way to progressively cooler and more dilute fluids of the late parts in the first stage and of the second stage. There is a systematic decrease in calculated ${\delta}^{18}O_{water}$ values with decreasing temperature in the Samsan hydrothermal system, from values of -86 per mil for early portion of stage I through -5.9 per mil for late portion of stage I to -6.3 per mil for stage II. The ${\delta}D$ values of fluid inclusion waters also decrease with paragenetic time from -76 per mil to -86 per mil. These trends combined with mineral paragenesis and fluid inclusion data are interpreted to indicate progressive cooler, more oxidizing meteoric water inundation of an early exchanged meteoric hydrothermal system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.110-117
• /
• 2019

Purpose: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. Materials and methods: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to $0^{\circ}$ and $100{\mu}m$, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, $5^{\circ}C/55^{\circ}C$). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (${\alpha}=.05$). Results: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P < .05). There was no significant difference among S3P, D3P, and MIL group (P > .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. Conclusion: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1096-1098
• /
• 2003

SBC(Single Board Computer) is being developed for MSC(Multi-Spectral Camera) on KOMPSAT-2(Korea Multi-Purpose Satellite). SBC controls all the units of MSC system and gets commands and sends telemetry to and from spacecraft bus via 1553 communication channel. Due to the fact that SBC does very important roles for MSC system operation and SBC operates with 100% duty cycle, SBC is designed to have high reliability. SBC which has Intel 80486 as a main processor includes eight serial communication channels, one mil-std-1553 interface channel and several discrete interfaces. SBC incorporates 2Mbyte radiation hardened SRAM(Static Random Access Memory) and 1Mbyte flash memory. There are also PIC(Programmable Interrupt Controller), counter, WDT(Watch Dog Timer) in the SBC. In this paper, the design result of the SBC is presented.