• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.227-229
• /
• 2008

태양광/풍력 복합발전시스템은 친환경적인 에너지원의 대표적인 복합발전시스템이다. 본 논문에서는 독립형 태양광/풍력 발전시스템을 이용한 가로등 시스템을 구성하여 출력특성을 고찰하였다. 풍력에서 발전된 교류전력을 DC로 변환하여 태양광발전에서 출력된 DC 전력과 공통 DC버스로 전달되도록 하였으며, 공통 직류단 병렬운전을 위해 출력전압을 일치시켰다. 또한 슈퍼캐패시터를 적용하여 발전된 전력의 배터리 충전매체로 활용하여 시스템의 안정성을 높이고 충방전 효율을 증가시키고자 하였다.

• 아동학회지
• /
• 제30권2호
• /
• pp.195-209
• /
• 2009

This study analyzed aspects of multiple intelligences related to rhythm, melody, understanding and representation of traditional Korean music. Subjects were 60 4-to 6-years-old children. Instruments were the Children's Korean Traditional Music (KTM) Ability Test (Park 2006)and Korean Multiple Intelligence Development Assessment Scale-My Young Child (MIDAS-MYC, Shearer, 1996). Data were analyzed by correlations and t-test. Findings were that (1) average scores on KTM rhythm and understandings were higher than melody and representation. (2) Traditional rhythm ability correlated most with linguistic intelligence. (3) Multiple intelligences by representation ability for KTM differed significantly in Linguistic intelligence and relationships to Naturalist, Musical, Logical-mathematical, Interpersonal, and Bodily-Kinesthetic intelligences.

• 한국전산구조공학회논문집
• /
• 제14권2호
• /
• pp.193-202
• /
• 2001

현재 국내에서는 아파트 건물을 짓는데 벽과 바닥판으로만 이루어진 벽식 구조형식을 많이 사용하고 있다. 이러한 고층 아파트건물을 해석하기 위해서 ETABS나 MIDAS/BDS 같은 상용프로그램이 주로 사용되고 있다. ETABS는 해석상의 편의를 위하여 바다판을 강막으로 가정하여 모형화 하고 바닥판의 휨강성은 고려하지 않고 있다. 이러한 가정은 프레임 구조물을 해석할 때에는 합리적이라고 할 수 있다. 그러나 벽식 구조물은 바닥판의 휨강성이 전체 구조물의 횡방향 강성에 큰 영향을 미치므로 바닥판의 휨강성을 고려하지 않으면 전체 구조물의 강성을 과소평가하게 된다. 따라서 바닥판을 판요소로 세분하여 모형화 하는 것이 필요하다. 그러나 이때 많은 양의 해석 시간과 컴퓨터 메모리가 필요하게 된다. 따라서 본 연구에서는 부분구조법과 행렬응축기법을 사용하여 해석 시간과 컴퓨터 메모리의 사용을 줄이면서도 바닥판의 휨강성을 효율적으로 해석할 수 있는 해석 기법을 제안하였고 예제를 통하여 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.136-139
• /
• 2004

The domestic concrete standard specification(l999) reports roughly about heat transfer analysis and thermal stress analysis for mass concrete. Engineers cannot but choice after all numerical method such FEM, FDM to escape review. It seems to us that the specification is room for reconsideration because above methods are vary expensive and without popularity. This study suggests thermal distributed function in mass concrete. The function consists of two independent variables, curing time and depth. It's results have been tested a sensitivity for unit cement content, form condition, curing condition, and shape(depth, width). Results of the function are made a comparison with analytical values of MIDAS/CIVIL and a few measurement values. The researchers could meet with coherent and good results for variable cases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.993_994
• /
• 2009

본 논문에서는 RGB 멀티칩 LED모듈을 구성하고 포워드 컨버터 방식의 Red LED의 구동전압인 13V 및 Green과 Blue LED의 구동전압인 21V의 다중출력 SMPS를 설계하였다. 설계 제작된 SMPS로 RGB 멀티칩 LED 모듈을 구동하였으며 21V 및 13V의 전압 출력이 안정적으로 구동됨을 확인하였으며 Red, Green, Blue 각각의 LED는 안정적으로 구동됨을 확인하였다. 또한 구동용 SMPS는 역률제어를 통하여 안정성을 향상시켰다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.273-278
• /
• 2000

These days, the number of residential-commercial buildings and apartments with pilotis is increasing. Generally, these buildings have a special structural called as Hybrid Structures consisting of upper-Walls and lower-Frames. However, this structures have some problems to be solved for the application of the regulation on the earthquake-resistant design and analysis techniques. Especially, in the case of irregular formal structures, engineers have to consider both the equivalent static analysis and the dynamic analysis. Thus, it is recommended to analyze those to inelastic region for economical reasons. In this paper, the method of modeling preceding the inelastic dynamic analysis using the DRAIN-2DX is presented to compare with those from MIDAS GENw program.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.199-207
• /
• 2006

Before getting to the actual study of the load distribution factor in various excavating methods, this research is preliminarily focused on the comparison of two different excavation methods, CD cut method and Ringcut method. Especially, the purpose of this research is to study the behavioral mechanism of two tunnels which share the same construction environment but different excavating method. Two numerical analysis models with the same tunnel section and material properties are compared in this study, and they are analyzed by 3D Finite Element Analysis. In each model, face stability, crown displacement, ground settlement, and shotcrete-lining stress are computed. Thus, the general behavior of CD cut method and Ringcut method are studied, and it certified what should be considered for the calculation of the load distribution factor.

• 산업기술연구
• /
• 제38권1호
• /
• pp.29-40
• /
• 2018

This study represents the marketing strategy of naturally fermented vinegar drink produced by a small business company located in Gangwon-do, the Republic of Korea. We surveyed about 200 potential customers in Seoul, Gyeonggi-do and Gyeongsangnam-do. Based on the survey result, we present the marketing strategy using the credited methodology, marketing mix(4P).

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2003

Recently, with a progressive development of hardware of computer, the internet and network technology, the environment of construction varies rapidly due to increase the complex form in structure shape and system. With variations, the CAD system for design and products also varies from 2D system to 3D system. This study mainly deals with the methodology of automatic connection design of 3D CAD system, steel connection system (XSteel) using macro. First, using design program in the steel connection system, Xsteel, the joint connection macro will be made up and established the detail classes of design. The next, Database Program (Converter Program) related to the general structural analysis program (MIDAS) and the steel connection program (Xsteel) is constructed for data interface between two programs. From this study, if the merits of 3D CAD system and converter program are utilized well, it is expected that the time needed in modeling and the amounts due to material loses decrease gradually.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.337-344
• /
• 2007

This paper is about the examination and selection of the special method applied to the railway tunnel which will lie under the road. Moreover, the road was constructed on the weak ground. Eventually, we select DSM, considering geological condition, stability during construction of the railway tunnel, and economic efficiency. The 3D-analysis, performed with PENTAGON-3D and MIDAS CIVIL-3D, shows that allowable standards are all satisfied. In the design of the railroad tunnel under the road at low depth, this paper will give useful data for the selection of the tunneling method.