• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.106-111
• /
• 2011

In this paper, assumed mode method on Euler beam theory is employed and signal distortion is considered to obtain the performances of a MEMS accelerometer which are a sensitivity and measurable frequency range(MFR). Not only the sensitivities and MFR but also the variations of dynamic responses and natural frequencies of the MEMS accelerometer are investigated for several sets of beam properties such as length, width, thickness and Young's modulus. It is stated that the variations of beam properties significantly influence the performances of the MEMS accelerometer and the relationship between sensitivities and MFR is inversely proportional to each other.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.791-798
• /
• 2011

All mechanical-system parameters have uncertainty, and this uncertainty directly affects system performances and results in a decrease in the manufacturing outputs. In particular, since the size of a MEMS system is extremely small, the manufacturing tolerances of a MEMS system are relatively large when compared to the tolerances of a macro-scale system. High manufacturing tolerances result from an increase in the uncertainty of the system parameters, thereby affecting the performances and manufacturing yields. In this paper, the performance uncertainty of a MEMS accelerometer due to system parameter uncertainty is analyzed by using several uncertainty analysis methods. Finally, the performance distributions and manufacturing yields of the MEMS accelerometer are predicted.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.592-595
• /
• 2004

This paper presents a study on the development of a multi-sensing inertial sensor with a single mechanical structure, which can be used both as a gyroscope and an accelerometer. The proposed MEMS gyro-accelerometer is designed to detect the angular rate and the acceleration at the same time using two separate detection circuits for one proof mass. In this study, the detection and signal processing circuit for an effective signal processing of different inertial measurements is designed, fabricated, and tested. The experimental results show that the performances of the gyro-accelerometer have resolutions of 1mg and 0.025deg/sec and nonlinearities of less than 0.5% for the accelerometer and the gyroscope, respectively, which are similar results with those of sensors with different structures and different detection circuits. The size of the sensor is reduced almost by 50% comparing with the sensors of separated proof mass.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1021-1022
• /
• 2010

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.831-837
• /
• 2013

MEMS accelerometer provides a low cost alternative in retrieving the acceleration signal for motion sensing. Theoretically, displacement can be calculated by double integrate the acceleration signal. However, in practical, it could not be done in straight forward manner due to several factors that exist in the real world. This experiment focuses on the processes from practical accelerometer signal acquisition till the result of double integration for low frequency vertical motion.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1951-1956
• /
• 2008

Various MEMS accelerometers are used in engineering applications including automobiles, mobile phones, military systems, and electronic devices. Among them, the thermal accelerometer employing the temperature difference induced by the convective flow inside the micro cavity has been a topic of interest. As the convective sensor does not utilize a solid proof mass, it is compact, lightweight, inexpensive to manufacture, sensitive and highly endurable to mechanical shock. However, the complexity of the convective flow and various design constraints make optimization of a device a crucial step before fabrication. In this work, optimization of a 2-axis thermal convective MEMS accelerometer is conducted based on 3-dimensional numerical simulation. Parametric studies are performed by varying the several design variables such as the heater shape/size, the cavity size and types of the gas medium and the position of temperature probes in the sensor. The results of optimal design are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.626-627
• /
• 2010

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.9
• /
• pp.1330-1336
• /
• 2015

It is necessary to study on acoustic and vibratory response of a MEMS resonant accelerometer before applying to military applications. In this paper, we analyze why the resonant accelerometer reacts to an acoustic wave and a high frequency vibration. And we describe experimental results on acoustic and vibratory response of the accelerometer. The accelerometer consists of a proof mass and a dual ended tuning fork. It is a differential resonant accelerometer with arranging a pair of accelerometers. The mode shape was analyzed to find out the input mode frequency by using a FEM simulation. Some experiments regarding the acoustic noise was carried out by using a tweeter and a microphone in the anechoic room. Results showed that the accelerometer reacted to the acoustic wave and vibration which had the input mode frequency as we had expected. We showed experimentally not only that the susceptibility of the accelerometer to an acoustic wave was 70 dB but also that the effectiveness of applying an acoustic absorber and a metal case was 20 dB, respectively. Also, we could minimize the vibratory response property of the accelerometer by installing a IMU with a silicone rubber mount pad.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.4
• /
• pp.405-411
• /
• 2020

In this paper, we designed the COS MEMS system for sensing the falling detection and explosive noise of fuse link in COS (Cut Out Switch) installing on the power distribution. This system analyzed the failure characteristics and an instantaneous breakdown of power distribution. Therefore, our system strengths the industrial competence and guaranties the stable power supply. In this paper, we applied BLE (Bluetooth Low Energy) technology which is suitable protocol for low data rate, low power consumption and low-cost sensor applications. We experimented with LSM6DSOX which is system-in-module featuring 3 axis digital accelerometer and gyroscope boosting in high-performance mode and enabling always-on low-power features for an optimal motion for the COS fuse holder. Also, we used the MP34DT05-A for gathering an ultra-compact, low power, omnidirectional, digital MEMS microphone built with a capacitive sensing element and an IC interface. The proposed COS MEMS system is developed based on nRF52 SoC (System on Chip), and contained a 3-axis digital accelerometer, a digital microphone, and a SD card. In this paper of experiment steps, we analyzed the performance of COS MEMS system with gathering the accelerometer raw data and the PDM (Pulse Data Modulation) data of MEMS microphone for broadcasting the failure of COS status.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.448-452
• /
• 2007

Many industrial operations require continuous or nearly-continuous operation of machines, which if interrupted can result in significant financial loss. The condition monitoring of these machines has received considerable attention recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is the development of smart sensor using which can on-line perform condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This sensor can receive data in real-time or periodic time from MEMS accelerometer. Furthermore, this system is capable for signal preprocessing task (High Pass Filter, Low Pass Filter and Gain Amplifier) and analog to digital converter (A/D) which is controlled by CPU. A/D converter that converts 10bit digital data is used. This sensor communicates with a remote site PC using TCP/IP protocols. Wireless LAN contain IEEE 802.11i-PSK or WPA (PSK, TKIP) encryption. Developed sensor executes performance tests for data acquisition accuracy estimations.