• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.480-486
• /
• 2021

Magnetoelectric (ME) composite is composed of a piezoelectric material and a magnetostrictive material. Among various ME structures, 2-2 type layered ME composites are anticipated to be used as high-sensitivity magnetic field sensors and energy harvesting devices especially operating at its resonance modes. Rosen type piezoelectric transducer using piezoelectric material is known to amplify a small electrical input voltage to a large electrical output voltage. The output voltage of these Rosen type piezoelectric transducers can be further enhanced by modifying them into ME composite structures. Herein, we fabricated Rosen type ME composites by sandwiching Rosen type PMN-PZT single crystal between two Ni layers and studied their ME coupling. However, the voltage step-up ratio at the resonance frequency was found to be smaller than the value calculated with α_ME value. The ATILA FEA (Finite Elements Analysis) simulation results showed that the position of the nodal point was changed with the presence of a magnetostrictive layer. Thus, while designing a Rosen type ME composite with high performance in a resonant driving situation, it is necessary to optimize the position of the nodal point by optimizing the thickness or length of the magnetostrictive layer.

• 동의생리병리학회지
• /
• 제25권3호
• /
• pp.528-532
• /
• 2011

This study was designed to investigate the collagen metabolism and tyrosinase activity of Meretrix extracts (ME). The effect of ME on type I procollagen production and collagenase activity in human normal fibroblasts HS68 after UVB (312 nm) irradiation was measured by ELISA method. The tyrosinase activity after treatment of ME was measured as well. Type I procollagen production was recovered by ME in UVB damaged HS68 cells. The increased collagenase activity after UVB damage was significantly recovered by ME. The tyrosinase activity and L-DOPA oxidation were significantly reduced as well. However, the effects on tyrosinase activity and L-DOPA oxidation were not powerful enough to be used as whitening agents. ME showed the anti-wrinkle effects and some whitening effects in vitro. These results suggest that ME may be a useful drug as an anti-wrinkle treatments.

• 한국가금학회지
• /
• 제21권4호
• /
• pp.267-275
• /
• 1994

Three dietary ME levels of 3,200, 2,900 and 2,600 kcal /kg in the same 13% single-stage low protein diet were compared to evaluate the effect of ME levels of grower diets on egg-type pullet growth and subsequent laying performance. As the ME levels of grower diets decreased, cumulative feed and protein consumptions increased(P<0.05), however, the ME intake and body weight at 18 wk of age decreased(P<0.05). Grower feed cost decreased as the dietary ME level was decreased, but no significant difference was found among dietary ME levels of grower diets. During the laying period, sexual maturity, hen-day egg production and average egg weight were not significantly affected by the ME levels of grower diet, however, daily feed intake and feed required per egg decreased as the dietary ME level of grower diet was reduced(P<0.05). Results of this study indicate that pullets can be reared on the low ME diet of 2,600 kcal /kg and it would he economical to utilize the low energy diet during the growing period when they are reared on a 13% single-stage low protein diet.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2955-2959
• /
• 2011

Second-order rate constants for nucleophilic substitution reactions of 2,4-dinitrophenyl benzenesulfonate 1a with a series of alicyclic secondary amines in MeCN have been measured spectrophotometrically and compared with those reported previously for the corresponding reactions performed in aqueous medium to investigate the effect of medium on reactivity and reaction mechanism. The amines employed in this study are found to be more reactive in the aprotic solvent than in $H_2O$. The reactions of 1a in MeCN result in a linear Br${\o}$nsted-type plot with ${\beta}_{nuc}$ = 0.58, which contrasts to the curved Br${\o}$nsted-type plot reported previously for the corresponding reactions performed in the aqueous medium (i.e., ${\beta}_2$ = 0.86 and ${\beta}_1$ = 0.38). Accordingly, it has been concluded that the reaction mechanism changes from a stepwise mechanism to a concerted pathway upon changing the medium from $H_2O$ to MeCN. Reactions of Y-substituted phenyl benzenesulfonates 1a-c with piperidine in MeCN result in a linear Br${\o}$nsted-type plot with ${\beta}_{lg}$ = -1.31, indicating that expulsion of the leaving group is significantly more advanced than bond formation in the transition state. The trigonal bipyramidal intermediate ($TBPy^{\pm}$) proposed previously for the reactions in $H_2O$ would be highly unstable in MeCN due to strong repulsion between the negative charge in $TBPy^{\pm}$ and the negative dipole end of MeCN. Thus, destabilization of $TBPy^{\pm}$ in MeCN has been concluded to change the reaction mechanism from a stepwise mechanism to a concerted pathway.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.72-76
• /
• 1985

Single crystals of the compound MeI $(LiMoO_4)$ and $Me^I(LiWO_4)$ ($Me^I=K$, Rb, Cs) were synthesized by slow evaporation from aqueous solution and bycooling from melt. The compounds of potassium or rubidium are hygroscopic and they form easily hydrated crystals $Me^I LiMoO_4$.$H_2O$ or $Me^ILiMoO_4$.$H_2O$ or $Me^ILiWO_4$.$H_2O$ from aqueous solution. The structures of these hydrated crystals are each other isotypic and they are built up of distorted layers of $(LiMoO_5)$ or $(LiWO_5)$. There exist two types of tetrahedral framework structures in this group of anhydrous molybdates and tung-states ; tridymite-type and cristobalite-type. $KLiMoO_4$ and $KLiWO_4$ have two types of polymorphic structures where as only the cristobalite-type is found in the Rb-and Cs-compounds. The system $KLiSO_4-KLiMoO_4$ was studied. Two components are almost immiscible but there eixst a narrow area of solid solution on the side of sulfate in the system.

• 대한화학회지
• /
• 제39권7호
• /
• pp.530-537
• /
• 1995

$MCl_z(M=Mo;\;z=5,\;M=V;\;z=3)$과 N, P 주개 리간드를 acetonitrile 용매에서 반응시켜 중성 착물 $MCl_3(phda)(MeCN)]과 \; [MCl_3(PPh_3)_2(MeCN)](M=Mo,\;V)$을 합성하였다. Acetone 용액에서 이들 중성 착물과 AgClO_4$를 반응시켜 양이온 착물 $MCl_{3-n}L_2(MeCN)(S)_n](ClO_4)_n$(n=1,2:s=solvent)을 얻었다. 염소가 연결된 $[(MeCN)(phda)ClM({\mu}-Cl)_2M'Cl(PPh_3)_2(MeCN)](ClO_4)_2$ 및 pyrazine이 연결된 $[(MeCN)(phda)Cl_2M({\mu}-pyz)M'Cl_2(PPh_3)_2(MeCN)](ClO_4)_2$형의 호모(M=M'), 헤테로 $(M{\neq}M')$ 이핵 착물을 합성하였다. 합성한 착물들은 원소분석과 적외선, $^1H,\;^13C$ 핵자기 공명 및 전자 흡수스펙트럼을 이용하여 그 특성을 조사하였다.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.271-275
• /
• 2011

This paper proposes a magnetoelectric (ME) composite transducer structure consisting of a magnetostrictive H-type Fe-Ni fork substrate and piezoelectric PZT plates. The fork composite structure has a higher ME voltage coefficient compared to other ME composite structures due to the higher quality (Q) factor. The ME sensitivity of the fork structure reaches 12 V/Oe (i.e., 150 V/cm Oe). The fork composite with two PZT plates electrically connected in series exhibits over 5 times higher ME voltage coefficient than the output of the rectangle structure in the same size. The experiment shows the composite of a Fe-Ni fork substrate and PZT plates has a significantly enhanced ME voltage coefficient and a higher ME sensitivity relative to the prior sandwiched composite laminates. By the use of a lock-in amplifier with 10 nV resolution, this transducer can detect a weak magnetic field of less than $10^{-12}$ T. This transducer can also be designed for a magnetoelectric energy harvester due to its passive high-efficiency ME energy conversion.

• 대한화학회지
• /
• 제36권2호
• /
• pp.261-272
• /
• 1992

네자리 Schiff base의 착물 Co(II)(3MeOSED)$(H_2O)_2$을 합성하였다. 이 착물의 균일 산화 활성촉매로서 산소첨가 착물은 DMF와 DMSO 용매에서는 ${\mu}$-peroxo형인 [Co(III)(3MeOSED)(DMF)]$_2O_2$와 [Co(III)(3MeOSED)(DMSO)]$_2O_2$이나 pyridine 용매에서는 superoxo형인 [Co(Ⅲ)(3MeOSED)(Py)]$O_2$로 주어진다. 이들의 CV법과 DPP법에 의한 전기화학적인 특성으로 ${\mu}$-peroxo형은 3단계 환원과정으로 일어나지만, superoxo형은 $O_2$의 prewave를 포함한 4단계 환원과정으로 일어난다. 산소가 포화된 메탄올 용액에서 [Co(III)(3MeOSED)(L)]$O_2(L: CH_3OH)$ 의 균일 산화 활성촉매에 의한 hydrazobenzene-$(H_2AB)$의 산화 주생성물은 trans-azobenzene(t-AB)이 선택적으로 다음과 같은 반응식으로 생성되고 이 때 속도상수는 k = (2.96 ${\pm}$ 0.2) ${\times}$ $10^{-1}$M/sec임을 알았다. $H_2AB$ + Co (Ⅱ)(3MeOSED)$(L_2)+O_2\;{\rightleftarrow^K}$ [Co(III)(3MeOSED)(L)]$O_2{\cdot}H_2AB{\longrightarrow^K}$ Co(II(3MeOSED)$(L)_2$+t-AB+$H_2O_2 $.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권7호
• /
• pp.1051-1060
• /
• 2008

Now days, various types of ships are operated to transport both cargo and passengers all around the world. Most of the important auxiliary machinery installed in those ships is fluid machinery such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified as turbo and positive displacement pumps. This paper analyzes only turbo pumps out of the two types. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on the ship's type, my paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, rpm of pumps, pump kW/ME MCR and pump kW/GE kW under the conditions of seagoing and berthing according to the ship's type. In conclusion, (1) For the exact comparison, information on the head, kW, flow rate, number of pumps by ship's type, the pump installation status of the Merchant Ships and Training Ships were tabulated and compared in this paper. (2) In order to qualify one ship as the delegate ship, several methods were used. The result of the examination indicates that the chosen ships could be justified as a suitable representation of ships of their own type. (3) The correlation of several values(total pump kW, port pump kW, GE kW, seagoing pump kW, pump weight, ME weight, ME MCR, number of pumps and ME kW) could be obtained.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.74-86
• /
• 1991

The purpose of this study was to evaluate the resulting root canal angulation and shape change after using various enlarging instruments. The mesial canals (120) of extracted human mandibular 1st and 2nd molars were randomly divided into 6 groups; Control, K-type me, Heliapical me, Canal Master me, sonic and ultrasonic instrumentation group. Vertical angulation of each canal was determined by a straight line through the long axis of canal and another straight line through the apical foramen to intersect at the point where the canal began to leave the long axis of the tooth. By recording and comparing the measured angles of the each set of pre-and postinstrumentation. Then, the roots were sectioned horizontally in the apical, middle, coronal thirds and the canal shapes examined, as was the mesiodistal canal diameter as it relates to the external root surface. The results were as follows: 1. Instrumentation using K-type me group resulted in the highest mean change in angulation ($9.900^{\circ}$) (p < 0.005), while Sonic Air MM 3000 group resulted in the least degree of straightening canals ($8.250^{\circ}$) (p < 0.005). 2. Canal Master file group resulted in the best canal shape at the three levels (P < 0.005). 3. Measured minimal mesial root width produced Heliapical me group at the apical 1/3 level, Sonic Air MM 3000 group at the middle 1/3 level, Heliapical me group at the coronal 1/3 level (P < 0.005). 4. Measured minimal distal root width produced Sonic Air MM 3000 group at the apical 1/3 level (P < 0.05), Heliapical me group at the middle 1/3 level (P < 0.005), Canal Master me group at the coronal 1/3 level (P < 0.005). 5. HeIiapical me group produced more increased canal diameter than any other groups (P < 0.005).