• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2001

Red pine (Pinus densiflora), white pine (Pinus koraiensis), larch (Larix leptolepis) and Western hemlock (Tsuga heterophylla) lumber were vacuum-press dried under three drying schedules to investigate current moisture contents (MC), drying rates and drying time factors related to five lumber thicknesses of 3, 5, 7, 9 and 11cm. Current MC could be estimated by drying factors such as lumber thickness, initial Me and drying time. Average drying rate from 30% to 15% Me was the highest for Western hemlock below fiber satuartion point, red pine, white pine and larch in the order of their magnitude. Drying rate curvilinearly decreased as lumber thickness increased. Drying time factor curvilinearly increased as lumber thickness increased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.696-703
• /
• 1994

To utilize waste of squid effectively, antioxidant properities of squid viscera were elucidated. Major fatty acids of total lipid, neutral lipid and phospholipid were $C_{16:0},\;C_{18:1}\;and\;C_{20:5},\;C_{22:6}$ and consisted $63{\sim}71\%$ of total fatty acids. Total lipid did not show significant antioxidant activity when added to the fish oil at the concentration below $5.0\%$, Antioxidant activity of hexane extract was lower than total lipid or tetra carbon chloride-methanol($CCl_4-MeOH$) extract. Extracts with $CCl_4-MeOH$ exerted higher antioxidant activity as the methanol ratio was increased, suggesting that polar lipid plays and important role.

• Applied Biological Chemistry
• /
• v.25 no.2
• /
• pp.99-104
• /
• 1982

Natural zeolite rock was pulverized and dispersed in water. Clay fraction was collected by sedimentation method. The dominant clay mineral was Clinoptiolite with some Mordenite and Smectite. $P^{32}$ adsorption on Na-zeolite was determined in different ionic strengths using $P^{32}$ isotope by sludge method. The lower the pH of suspension, the longer the contact time, and the more the amount of zeolite, the more inorganic P was adsorbed by Na-zeolite, whereas the more P adsorption per unit gram of zeolite was observed at a 100mg addition than a 200mg in same volume of P-NaCl solution (20ml), indicating that the whole positively charged surface of Na-zeolite was not occupied by inorganic P. Furthermore, the more P adsorption on Na-zeolite was observed in higher ionic strength than in the lower. The maximum P adsorption on Na-zeolite was about 1me/g, and the zero point charge (ZPC) is assumed to be below pH 3.7.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.591-596
• /
• 2016

The purpose of this study is to determine the equivalent energy of a 6MV X-ray beam in the experiment. The half-value layer (HVL) of lead for the 6 MV X-ray beam was measured using an ionization chamber. The linear attenuation coefficients were calculated with HVL. And, the mass attenuation coefficient was obtained by dividing the linear attenuation coefficient by the density of lead. The equivalent energy of mass attenuation coefficient was determined using the photon energy versus mass attenuation coefficient data of lead given by National Institute of Standards and Technology (NIST). In conclusion, the equivalent energy of the 6 MV X-ray beam was determined to be 1.61 MeV. This equivalent energy was determined to be about 30% lower than reported by Reft. The reason is presumed to be due to the presence of an air cavity between the lead attenuators.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.253-261
• /
• 2015

The kinetics of the transesterification of dimethyl terephthalate (DMT) with diethylene glycol (DEG) was studied in a batch reactor. bis-hydroxyethoxytethyl-terephthalate (BHEET), which is polyester polyol monomer, can be produced by the transesterification reaction. Zinc acetate was used as a catalyst. Previous kinetic studies was carried out in a semi-batch reactor where generated methanol was removed so that reverse reactions were not considered in the kinetic expressions, resulting in inaccuracy of the kinetic model. Mathematical models of a batch reactor for the tranesterification reaction, which took the reverse reaction into account, were developed and used to characterize the reaction kinetics and the composition distribution of the reaction products. More accurate models than previous ones were obtained and found to have a good agreement between model predictions and experimental data. Effect of process variables on the esterification reaction was investigated based on the experimental and simulation results.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.4
• /
• pp.174-184
• /
• 2009

Evapotranspiration (ET) is one of the major hydrologic processes in terrestrial ecosystems. A reliable estimation of spatially representavtive ET is necessary for deriving regional water budget, primary productivity of vegetation, and feedbacks of land surface to regional climate. Moderate resolution imaging spectroradiometer (MODIS) provides an opportunity to monitor ET for wide area at daily time scale. In this study, we applied a MODIS-based ET algorithm and tested its reliability for nine flux tower sites in East Asia. This is a stand-alone MODIS algorithm based on the Penman-Monteith equation and uses input data derived from MODIS. Instantaneous ET was estimated and scaled up to daily ET. For six flux sites, the MODIS-derived instantaneous ET showed a good agreement with the measured data ($r^2=0.38$ to 0.73, ME = -44 to $+31W\;m^{-2}$, RMSE =48 to $111W\;m^{-2}$). However, for the other three sites, a poor agreement was observed. The predictability of MODIS ET was improved when the up-scaled daily ET was used ($r^2\;=\;0.48$ to 0.89, ME = -0.7 to $-0.6\;mm\;day^{-1}$, $RMSE=\;0.5{\sim}1.1\;mm\;day^{-1}$). Errors in the canopy conductance were identified as a primary factor of uncertainty in MODIS-derived ET and hence, a more reliable estimation of canopy conductance is necessary to increase the accuracy of MODIS ET.

• Journal of Food Hygiene and Safety
• /
• v.33 no.3
• /
• pp.168-175
• /
• 2018

The use of microwave-assisted extraction and an acid-base clean-up process to determine the amount of methylmercury (MeHg) in marine products was suggested in order to improve the complicated sample preparation process. The optimal conditions for microwave-assisted extraction was developed by using a 10% NaCl solution as an extraction solution, setting the extraction temperature at $50^{\circ}C$, and holding for 15 minutes to extract the MeHg in marine products. A NaOH solution was selected as a clean-up substitute instead of L-cysteine solution. Overall, 670 samples of marine products were analyzed for total mercury (Hg). Detection levels were in the range of $0.0006{\sim}0.3801{\mu}g/kg$. MeHg was analyzed and compared using the current food code and the proposed method for 49 samples which contained above 0.1 mg/kg of Hg. Detection ranges of methylmercury followed by the Korea Food Code and the proposed method were $75.25(ND{\sim}516.93){\mu}g/kg$ and $142.07(100.14{\sim}244.55){\mu}g/kg$, respectively. The total analytical time of proposed method was reduced by more than 25% compared with the current food code method.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.267-274
• /
• 1993

This experiment was carried out to determine the effect of mixture ratios of worm cast and soil on the growth orchardgrass seedlings, and estimate the adequate mixture ratio of worm cast for plant growth media. Mixture ratios of worm cast and soil were 100:0, 80:20, 60:40, 40:60, 20:80 and 0:100, respectively. The results were summarized as follows; 1. The value of dry weight of shoot(SW), dry weight of root(RW), number of tillers per plant(NT) and biological yield(BY) were the highest in the mixture with 60% of worm cast. Particularly, the dry weight distribution to root in 20%-60% mixture ratios of worm cast were higher than those grown in 80%-100% mixture ratios of worm cast, it may due to the enhancement of root growth by adquate worm cast mix. 2. The orchardgrass seedlings in the 60% mixture ratio of worm cast grown in favourable soil conditions compared to those grown in other mixtrure ratios of worm cast and soil without worm cast. The soil analysis data showed that 60% mixture ratio of worm cast contained pH 6.16, 13.84% of organic matter, 0.84% of total nitrogen, 1,413.9ppm of available phosphorus and 16.7me／100g of cation exchange capacity, respectively. 3. Biological yield(BY) indicated positive significant correlation with the dry weights of shoot(SW) and root(RW). And, the dry weight of shoot(SW) had positive correlation with the number of tiller per plant(NT) and dry weight of tiller(WT).

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.61-66
• /
• 1970

This study examined the morphology and physical and chemical characteristics of the Changpyeong series developed on gently sloping to rolling relief on dissected old paddiplains and terraces. This soil has dark brown silty clay loam A horizons, very thick dark red to red silty clay or clay Bt horizons, and C horizons of old alluvial materials frequently with strongly weathered round cobbles and pebbles. It is strongly acid with a low organic matter content, relatively low in cation exchange capacity, but with relatively high base-status based on amount of extractable cations. There is no obvious changes in particle size distribution with depth and textural B horizons probably have not been formed by podzolization but formed by mechanical movement of clay. This soil is classified as Typic Hapludalfs in USDA 7th approximation and Brunic Luvisols in FAO classification system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.18 no.1
• /
• pp.55-63
• /
• 2016

Temperature lapse rate within the planetary boundary layer shows a diurnal cycle with a substantial variation. The widely-used lapse rate value for the standard atmosphere may result in unaffordable errors if used in interpolating hourly temperature in complex terrain. We propose a simple method for estimating hourly lapse rate and evaluate whether this scheme is better than the conventional method using the standard lapse rate. A standard curve for lapse rate based on the diurnal course of temperature was drawn using upper air temperature for 1000hPa and 925hPa standard pressure levels. It was modulated by the hourly sky condition (amount of clouds). In order to test the reliability of this method, hourly lapse rates for the 500-600m layer over Daegwallyeong site were estimated by this method and compared with the measured values by an ultrasonic temperature profiler. Results showed the mean error $-0.0001^{\circ}C/m$ and the root mean square error $0.0024^{\circ}C/m$ for this vertical profile experiment. An additional experiment was carried out to test if this method is applicable for the mountain slope lapse rate. Hourly lapse rates for the 313-401m slope range in a complex watershed ('Hadong Watermark 2') were estimated by this method and compared with the observations. We found this method useful in describing diurnal cycle and variation of the mountain slope lapse rate over a complex terrain despite larger error compared with the vertical profile experiment.