• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1928-1934
• /
• 2009

This paper proposes a power management scheme for sensor nodes in wireless sensor networks based on sensor node operating system supporting the sensor transparency, which can turn off the sensors when the MCU is in sleep mode. We classify the sensors in two types, that is, event sensors and polling sensors, to be able to decide whether the sensor is a type of sensors whose power supply can be turned off or not, and we design a new scheduler to support recognition of those different types of sensors. Implementing and evaluation of the scheduler and the power manager supporting sensor transparency are shown based on Nano-Q+.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.285-286
• /
• 2021

With the recent development of Internet of Things (IoT) technology, smartization technology is expanding to the fields of agriculture, livestock, and fisheries, and smartization is in progress. In this smart technology, the most important thing is how to measure the data in the field and transmit it to the management system. Currently, the sensors used in the construction of smart farms and other livestock houses and farms are measuring and monitoring smart farms and other environmental conditions through various sensors such as temperature, humidity, CO gas, CO2, hydrogen, and O2. The communication method between these sensors and the HMI (Human Machine Interface) module that controls and manages the smart farm is still mainly using the RS-485-based modbus-RTU method. In this paper, we intend to design the MCU module for HMI so that various sensor modules can be connected to manage data through the RS-485-based Modbus method so that the sensor data required for smart farm construction can be managed by the HMI module.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.553-563
• /
• 2012

Serial peripheral interface (SPI) has been identified as a bottleneck in many wireless sensing systems today. SPI is used almost universally as the physical connection between the microcontroller unit (MCU) and radios, storage devices, and many types of sensors. Virtually all wireless sensor nodes today perform up to twice as many bus transactions as necessary to transfer a given piece of data, as an MCU must serve as the bus master in all transactions. To eliminate this bottleneck, we propose the master-handoff protocol. After the MCU initiates reading from the source slave device and writing to the sink slave device, the MCU as a master becomes a slave, and either the source or the sink slave becomes the temporary master. Experiment results show that this master-handoff technique not only cuts the data transfer time in half, but, more importantly, also enables a superlinear energy reduction.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.3
• /
• pp.112-117
• /
• 2009

An animal assisted therapy (AAT) for handicapped child's psychotherapy has been reported by some researches. A robot can be substituted for the role of a real animal of the AAT. The robot for the AAT is called RAT (Robot Assisted Therapy). It consists of four parts: microprocessor-based MCU(Micro Control Unit), sensing part with various sensors, the movement part operated by some motors, and the exterior with soft feel. We will here introduce the RAT.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.55-62
• /
• 2024

In this paper, we propose a thin-film hydroponic plant cultivator using HMI display and IoT technology. Existing plant cultivators were difficult to manage due to soil-based cultivation, and it was difficult to optimize environmental conditions due to the open cultivation environment. In addition, there are problems with plant cultivation as immediate control is difficult and growth of plants is delayed. To solve this problem, a cultivation environment was established by connecting the MCU and sensors, and the environment information could be checked and quickly controlled by linking with the HMI display. Additionally, a case was applied to minimize changes in environmental information. Implementation of a thin-film hydroponic cultivation system made soil management easier, improved functionality through operation and control, and made it easy to understand environmental information through the display. The effectiveness of rapid growth was confirmed through crop cultivation experiments in existing growers and hydroponic growers. Future research directions will include optimizing growth information by transmitting and storing cultivation environment information and linking and comparing growth information using vision cameras. It is expected that this will enable efficient and stable plant cultivation.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.392-402
• /
• 2020

This paper proposes a solar tracking system without photo-sensors. The system can be classified into four modules: Solar Tracking, MPPT, ESS, and Real-Time Monitoring. Nine solar panels, as a basic unit, are adopted with grid structures of different heights to reduce wind influence and to enable solar tracking without photo-sensors. The low-cost MCU implements MPPT method which generates PWM switching signal for boost converter. The unit of ESS consists of three-series and four-parallel lithium-ion batteries in order to enable monitoring for abnormalities in temperature and electrical characteristics of battery. Four MCUs used in the system consists of two AVR Atmega128, and two Raspberry PI, and they exchanges operation informations. Experimental results of the proposed system show the solar tracking performance, the possibility of on-site and remote monitoring and the convenience of maintenance based on IoT technology.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.117-122
• /
• 2007

In this paper, we described a design and implementation of a sensor node for environmental monitoring. The main focus of design for sensor nodes is to isolate MCU for treating sensors from the RF module for considering various communication environment. The second is to make the interface between MCU and varity of sensor. In addition, we choose a narrow band communication module, cc1020, for the admittance of Korea government communication law. We also use a uC/OS-II as an operating system which is famous for 8bit MCUs. We showed that the communication performance is sufficient to use the communication module in a out-door environment through several experiments in that it is possible to transmit between 100m distance through experiments in a mountain.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.267-273
• /
• 2015

Recently, a wide range of products incorporating cutting-edge technology are being introduced in various sectors of design. Belkin's WeMo or Phillips' Hue are representative examples. In this context, the color-responsive lighting bookcase is a design product that would satisfy the needs of contemporary consumers who seek entertainment in their purchases. By installing lightings that change color according to the user's behavior, this design reconceptualizes the bookcase as a source of entertainment rather than a mundane object of household furnishing. The lighting apparatus can be detached and reattached, serving as stand-alone equipment. The lighting bookcase is modularized, comprising extensions equipped with MCU (Micro Controller Unit), RGB LED and color sensors. The bookcase as a whole is extendable towards four directions up to nine units with the lighting bookcase at the center. The extended, multiple lighting bookcases are wired to receive power from the main bookcase, and are equipped with RGB LEDs but not with MCUs or color sensors. Receiving power and color signals from the main lighting bookcase, the sub-bookcases feature changing shades of color. Also, it includes IoT(internet of Things). This study is a proposal of a design product, modularized to control the shades of the bookcase lighting using these sensors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.53-59
• /
• 2009

By the use of open source and 16bit Microcomputer, IDB(Integrated Development Board) for embedded technical education was designed and developed. Based on 16bit MCU H8/300H, LED, LED Matrix, motors, sensors and various I/O circuitry, and the connection to a computer via the SCI, and $16{\times}2$ character LCD was designed and implemented on IDB. In addition, the software development environment was build by the assembler and H8 C compiler which is provided to the open-source software. And memory expansion was considered to include TRON(Real time OS) and uClinux. To verify the developed board, IDB was fabricated by PCB machine, and the fuction was confirmed by the basic I/O control program.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1231-1235
• /
• 2016

In this study, it measures electromyogram to estimate scoliosis by using sensors in both sides of spinal erector muscle. A device is measured raw data to input mcu through a filter and amplifier. MCU is named "arduino" that is calculated muscle activity with algorithm by inputting data. By comparing with both sides of spinal erector muscle's activity, it studies about estimation of scoliosis