• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.153-162
• /
• 2018

The importance of energy harvesting technique is increasing due to the elevated level of demand for sustainable power sources for wearable device applications. In this study, we developed an Energy Harvesting wearable Platform(EH-P) architecture which is used in the design of a multi-energy source based on TENG. The proposed switching circuit produces power with higher current at lower voltage from energy harvesting sources with lower current at higher voltage. This can powers microcontrollers for a short period of time by using PV and TENG complementarily placed under hard conditions for the sources such as indoors. As a result, the whole interface circuit is completely self-powered with this makes it possible to run of sensing on a Wearable device platform. It was possible to increase the wearable device life time by supplying more than 29% of the power consumption to wearable devices. The results presented in this paper show the potential of multi-energy harvesting platform for use in wearable harvesting applications, provide a means of choosing the energy harvesting source.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.373-379
• /
• 2016

As the five-day workweek has been implemented in Korea many people are focusing their attention on hobbies, leisure activities or camping to enjoy the weekend. Recently many workers are purchasing personal mobility devices for commute, due to the launch of cheap personal mobility devices by Xiaomi. Under such circumstances, this study aimed to develop turn signals by using gyroscope sensors for safe use of personal mobility devices or for leisure activities. This study focused on previous cases of turn signal production for the safety during leisure activities or for personal mobility devices and analyzed their cases and identified problems. This study further presented an alternative design to overcome such problems and to develop turn signals for the safety of users. This is ring shape and included LED and then it expresses user's direction for backside. This study is one of the solution for safety of personal mobility product user.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.341-347
• /
• 2015

Since the advent of Apple's iPhone, the smartphone industry has been producing new technologies and concepts at an accelerated pace. The speed of progress in this sector is exponentially increasing in accordance with Moore's Law, and smartphones are rapidly changing various aspects of human life. Especially, object control technologies using smartphones are being utilized in various sectors, including robots, home automation, and smart objects. However, the current smartphone object control technology is limited in terms of multicontrol. This study proposes the combined usage of the Bluetooth and Zigbee Modules for multiple object control using smartphones, and presents the necessary application design properties and the methodology for Zigbee communication. The study is an attempt at a territorial expansion of design, as a proposal of new methods for utilizing smartphones in the age of smart objects.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.3
• /
• pp.284-294
• /
• 2008

In this paper, we describe an implementation of small mobile robot that can be used at research and application of mobile sensor networking. This robot that will constitute the sensor network, as a platform of multi-robot system for each to be used as sensor node, has to satisfy restrictions in many aspects in order to perform sensing, communication protocol, and application algorithms. First, the platform must be designed with a robust structure and low power consumption since its maintenance after deployment is difficult. Second, it must have flexibility and modularity to be used effectively in any structure so that it can be used in various applications. Third, it must support the technique of wireless network for ubiquitous computing environment. At last, to let many nodes be scattered, it must be cost-effective and small. Considering the above restrictions of the mobile platform for sensor network, we designed and implemented robots control the current of actuator by using additional circuit for power efficiency. And we chose MSP430 as MCU, CC2420 as RF transceiver, and etc, that have the strength in the aspect of power. For flexibility and modularity, the platform has expansion ports. The results of experiments are described to show that this robot can act as sensor node by RF communication process with Zigbee standard protocol, execute the navigation process with simple obstacle avoidance and the moving action with RSSI(Received Signal Strength Indicator), operate at low-power, and be made with approx. $100.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.211-218
• /
• 2018

Recently, various technologies related to IIoT are introduced continuously due to the spread of IoT and smart factory industries. This paper proposes the construction of a two-way wireless network system for monitoring plant equipment using these various technologies. The main technologies used in this thesis are design techniques for micro sensor nodes to monitor facility conditions at various sites, MQTT technology for wireless communication between local server and sensor nodes and Node-RED based design technologies, which store data collected and can be easily presented to users via wired and wireless wires. In addition, a wireless two-way camera system was also implemented in which the screen images of the site can be viewed in the situation room according to the instructions of the situation room when determining abnormal conditions.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.351-355
• /
• 2007

Solvent-extracted volatile components from dry powder prepared from Citrus unshiu products such as immature Citrus unshiu (PCU), mature Citrus unshiu (MCU), Citrus unshiu peel (CUP), and citrus juice processing wastes (CJPW), were examined. Also, solvent-extracted volatile components from mushroom mycelia of Pycnoporus coccineus (PC), Lentinus edodes (LE), Pleurotus eryngii (PE), Hericium coralloides (HC), Panellus serotinus (PS), and Ganoderma lucidum(GL), all cultivated using citrus pulp solid media, were assayed. Twenty-nine volatile components were identified in dry powder prepared Citrus unshiu and 18 volatile components were characterized from mushroom mycelia. Of these, ${\beta}-elemene$, germacrene-D, and ${\delta}-cadinene$, were derived from CJPW, but caryophyllene, hexadecanoic acid, decanoic acid, and tetradecanoic acid were synthesized by mushroom mycelia.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1038-1043
• /
• 2015

When the study on the relationship between the Head-of-Bed (HOB) angle and ventilator-associated pneumonia is performed, the fact that the HOB angle can only be measured intermittently imposes a significant limitation on the study. Therefore, there has been demand for the development of a device that can measure the HOB angle continuously. In this paper, we propose the rapid prototyping of an HOB measurement system using open-source hardware and software. The proposed system helps to maintain the HOB angle at a particular angle by displaying the angle and helps the medical study of pneumonia patients by enabling continuous data acquisition. Firstly, we eliminate the process of making an MCU board by utilizing an open-source hardware mbed LPC1768. Secondly, we reduce the software development time by using libraries and hence enabling the easy use of peripherals. Thirdly, for rapid prototyping, we build the enclosure of the proposed system using a 3D printer. The proposed system can be attached and detached to and from a bed. Therefore, we can attach it to the bed of a patient for whom measurement of the HOB angle is necessary. Finally, we check the measurement performance and the validity of the proposed system through an experiment utilizing an incremental encoder.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.1-8
• /
• 2007

In wireless sensor network which uses limited battery, power consumption is very important factor for the survivality of the system. By using low-power communication to reduce power consumption, error rate is increased in typical conditions. This paper analyzes power consumption of specific error control coding (ECC) implementations. With identical link quality, ECC provides coding gain which save the power for transmission at the cost of computing power. In sensor node, transmit power is higher than computing power of Micro Controller Unit (MCU). In this paper, Viterbi algerian is applied to the low-transmit-power sensor networks in terms of network power consumption. Practically, Viterbi algorithm presents 20% of reduction of re-transmission in compared with Auto Repeat Request (ARQ) system. Furthermore, it is observed that network power consumption is decreased by almost 18%.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.4
• /
• pp.159-166
• /
• 2020

The IBC (Intra-Body Communication) benefits from a wireless communication system for exchanging various kinds of digital information through wearable electronic devices and sensors. The IBC using the human body as the transmission channel allows wireless communication without the transmitting radio frequency waves to the air. This paper discusses the results of experiments on electrostatic coupling IBC based on FSK (Frequency Shift Keying) and 1 bit error correction. We implemented FSK communication and 1 bit error correction algorithm using the MCU boards and aluminum tape electrodes. The transmitter modulates digital data using 50% duty square wave as carrier signal and transmits data through human body. The receiver performs ADC (Analog to Digital Conversion) on carrier signal from human body. In order to figure out the frequency of carrier signal from ADC results, we applied zero-crossing algorithm which is used to detect the edge characteristic in computer vision. Experiment results shows that digital data modulated as square wave can be successfully transmitted through human body by applying the proposed architecture of a 1ch GPIO as a transmitter and 1ch ADC for as a receiver. Also, this paper proposes 1 bit error correction technique for reliable IBC. This technique performs error correction by utilizing the feature that carrier signal has 50% duty ratio. When 1 bit error correction technique is applied, the byte error rate at receiver side is improved around 3.5% compared to that not applied.