• 폴리머
• /
• 제29권2호
• /
• pp.122-126
• /
• 2005

Al-MCM-41의 제조방법이 선형 저밀도 폴리에틸렌(LLDPE)의 촉매 분해 활성에 어떠한 영향을 주는지 조사하였다 이를 위해 Al-MCM41은 직접 합성법(Al-MCM41-D)과 후처리법(Al-MCM-41-P)의 두 가지 방법으로 제조되었으며, XRD, BET, $NH_3\;TPD,\;^{27}Al$ MAS NMR 등을 이용하여 이들 촉매 특성을 규명하였다. TGA 동역학 방법을 사용하여 Al-MCM-41-D와 Al-MCM-41-P의 LLDPE촉매 분해 활성화 에너지를 구한 결과 각각 197.54, 174.26 kJ/mol로 나타났다. 이처럼 시-MCM-41-P가 시-MCM-41-D보다 촉매 활성이 높은 이유는 접근 가능한 산점수가 훨씬 많고 상대적으로 기공 크기도 작은 것에 기인한 것으로 여겨진다.

• Korean Chemical Engineering Research
• /
• 제45권3호
• /
• pp.215-218
• /
• 2007

본 연구의 목적은 다이옥신 분해 촉매 반응에 Pt/Al-MCM-41 메조포러스 촉매를 이용할 수 있는 가능성을 알아보고자 하는 것이다. 다이옥신 분해 반응에 대한 모델 반응으로 1,2-dichlorobenzene 분해 반응을 실시하였다. 비교 촉매로는 $Pt/{\gamma}-Al_2O_3$ 촉매를 사용하였다. Post grafting 방법으로 Al-MCM-41 촉매를 제조하여 실험한 결과, Si/Al = 15, 30인 Pt/Al-MCM-41 촉매가 $Pt/{\gamma}-Al_2O_3$ 촉매 보다 우수한 활성을 나타내었다. 이러한 반응 활성은 산점의 양과 밀접한 관계를 나타내었다. 특히 Al-MCM-41을 H-form으로 이온교환하여 반응 실험에 적용한 결과, 활성이 더욱 더 증대되었다.

• 공업화학
• /
• 제34권6호
• /
• pp.674-678
• /
• 2023

고정층 상압 유통식 반응기를 사용하여 Pt(1)-Fe(30)/MCM-41와 Fe(30)/MCM-41의 촉매상에서 메탄의 분해 반응을 수행하여 수소의 수율을 구하여 Pt의 효과를 조사하였다. XRD 분석으로 반응 전 Pt(1)-Fe(30)/MCM-41 촉매에서 Fe₂O₃와 Pt의 결정상이 나타났다. SEM, EDS 분석과 매핑 이미지로부터 촉매 표면상에 Fe, Pt, Si, O의 나노 입자들이 균일하게 분포함을 알 수 있었다. XPS 분석으로 Pt⁰, Pt²⁺, Pt⁴⁺, Ft⁰, Fe²⁺, Fe³⁺ 등의 이온과 O^2-, O^-의 산소종이 존재함을 알 수 있었고, Fe(30)/MCM-41 촉매에 Pt를 1 wt% 첨가하면 촉매 표면상에서 Fe2p의 원자 백분율이 13.39%에서 16.14%로 증가하고 Pt4f는 1.51%이었다. 수소의 수율은 Fe(30)/MCM-41보다 3.2배 높았다. Pt로부터 Fe로 H₂의 스필오버(spillover) 효과로 Fe 입자의 환원을 증가시키고, Fe, Pt와 MCM-41의 적당한 상호작용으로 미세한 나노입자를 촉매 표면상에 균일하게 분산을 증가시켜 수소수율을 향상시켰다.

• Bulletin of the Korean Chemical Society
• /
• 제20권6호
• /
• pp.715-719
• /
• 1999

The incorporation of cobalt into mesoporous molecular sieves MCM-41 and MCM-48 was carried out. Co-PO/MCM41 and Co-PO/MCM48 were prepared using Co(II) acetate solution adjusted to pH = 3.0 with phosphoric acid by the incipient wetness method. Photoacoustic spectroscopy (PAS) was used to study the local environments of Co(II) incorporated into mesopores. The band around 500 nm in PAS of as-prepared Co-PO/MCM41 and Co-PO/MCM48 with Co(II) acetate solution was changed to triplet bands around 600 nm. This could be assigned to the 4 A2(F)-> 4T1(P) transition of Co(II) surrounded tetrahedrally by oxygen ions after calcination. It may be attributable to that the octahedral cobalt species containing phosphate ligands in coordination sphere reacting with framework's silanol groups to be dispersed atomically onto the surface of mesoporous molecular sieves as a tetrahedral species. This is unlike that the Co in Co-Cl/MCM41 and direct-synthesized Co-MCM41 transforms to Co oxide phase upon calcination. Co-PO/MCM41 and Co-PO/MCM48 were stable while treated with water.

• Bulletin of the Korean Chemical Society
• /
• 제20권3호
• /
• pp.291-296
• /
• 1999

The immobilization of APTMS(3-(2-aminoethylamino)propyltrimethoxysilane) and AAPTMS(3-(2-(2-aminoethyl)aminoethylanino)propyltrimethoxysilane) on the surface of high quality mesoporous molecular sieves MCM-41 and MCM-48 have been confirmed by F.T.-IR spectroscopy, Raman spectroscopy, 29Si solid state NMR, and a surface polarity measurement using Reichardt's dye. The formation of metal (Co(Ⅱ), Ni(Ⅱ), and Cu(Ⅱ)) complexes by immobilized aminosilanes have been investigated by photoacoustic spectroscopy(PAS). The assignment of UV-Vis. PAS bands makes it possible to identify the structure of metal complexes within mesoporous molecular sieves. Co(Ⅱ) ion may be coordinated mainly in a tetrahedral symmetry by two APTMS onto MCM-41, and in an octahedral one by two AAPTMS. Both Ni(Ⅱ) and Cu(Ⅱ) coordinated by aminosilanes within MCM-41 form possibly the octahedral complexes such as [Ni(APTMS)2(H20)2]2+, [Ni(AAPTMS)2]2+, [Cu(APTMS)2(H2O)2]2+, and [Cu(AAPTMS)(H2O)3]2+, respectively. The PAS band shapes of complexes onto MCM-48 are similar to those of corresponding MCM-41 with the variation of PAS intensity. Most of metal ion(Ⅱ) within MCM-41 and MCM-48 are coordinated by aminosilanes without the impregnation on the surface.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.495-505
• /
• 2016

Mesoporous MCM-41 was deposited on an inexpensive disk shaped ceramic support through hydrothermal technique for ultrafiltration of $Fe^{3+}$ from aqueous solution. The ceramic support was fabricated using uni-axial compaction technique followed by sintering at $950^{\circ}C$. The characteristics of MCM-41 powder as well as the composite membrane were examined by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscope (FESEM), porosity and pure water permeation test. The XRD result revealed the good crystallinity and well-resolved hexagonally arranged pore geometry of MCM-41. TGA profile of synthesized MCM-41 zeolite displayed the three different stepwise mechanisms for the removal of organic template. The formation of MCM-41 on the porous support was verified by FESEM analysis. The characterization results clearly indicated that the accumulation of MCM-41 by repeated coating on the ceramic disk directs to reduce the porosity and pore size from 47% to 23% and 1.0 to $0.173{\mu}m$, respectively. Moreover, the potential of the fabricated MCM-41 membrane was investigated by ultrafiltration of $Fe^{3+}$ from aqueous stream at various influencing parameters such as applied pressure, initial feed concentration and pH of solution. The maximum rejection 85% was obtained at applied pressure of 276 kPa and the initial feed concentration of 250 ppm at pH 2.

• 분석과학
• /
• 제19권3호
• /
• pp.211-217
• /
• 2006

Diphenyl amine (DPA) was polymerized inside the channels of the mesoporous silica (MCM-41). MCM-41 (C) and MCM-41 (D) were prepared with cetyltrimethyl ammonium bromide (CTAB) and dodecyltrimethyl ammonium bromide (DTAB), respectively and used as hosts. Initially, the self assembly of DPA inside the pores of MCM-41 was made in ${\beta}$-naphthalene sulfonic acid (NSA) medium and subsequently poly (diphenylamine), PDPA was formed by oxidative polymerization. $N_2$ adsorption-desorption measurements of PDPA loaded MCM-41 (C) and MCM-41 (D) show variations in pore volume and surface area between them. A tubular form of poly (diphenylamine), PDPA was envisaged to form in the pores of MCM-41 and supported by high resolution transmission microscopy. The presence of PDPA inside the channel of MCM-41 was further confirmed by FTIR spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction.

• 마이크로전자및패키징학회지
• /
• 제7권3호
• /
• pp.31-36
• /
• 2000

RF(radio Frequency)용 MCM(Multichip Module)-D 기판 내장형 인덕터를 개발하였다. MCM 기술은 고밀도 패키징 기술로서 주로 디지털회로에 많이 적용되어 왔으나, 최근에는 아날로그회로 및 디지털회로가 혼재된 혼성신호 및 초고주파 회로에도 적용되고 있다. 혼성신호에서는 능동소자 주변에 많은 수의 수동소자가 연결되므로 MCM-D 기판에 수동소자를 내장시키면 원가절감과 시스템의 크기 축소 및 경량화를 이를 수 있을 뿐 아니라, 성능과 신뢰성을 향상시킬 수 있다. 본 논문에서 MCM-D 기판은 Cu/감광성 BCB(Benzocyclobutene)를 각각 금속배선 및 절연막 재료로 사용하였고, 금속배선은 Ti/Cu를 각각 1000 $\AA$/3000 $\AA$으로 스퍼터한 후 fountain 방식으로 전기 도금하여 3 $\mu\textrm{m}$ Cu를 형성하였으며, 인덕터는 coplanar구조로 하여 기존의 반도체 공정을 이용하여 MCM-D기판에 인덕터를 안정적으로 내장시키고 전기적 특성을 측정하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권6호
• /
• pp.3479-3482
• /
• 2013

Background: Proliferation markers widely have been used to diagnose and determine the behaviour and prognosis of benign and malignant tumours. Minichromosome maintenance 3 (MCM3) is a novel proliferation marker. The aim of this study was to evaluate and compare MCM3 with Ki-67 in diagnosis of salivary gland tumours. Materials and Methods: In this retrospective study, immunohistochemical expression of MCM3 and Ki-67 was evaluated in 15 pleomorphic adenomas (PA), 17 mucoepidermoid carcinomas (MEC) and 18 adenoid cystic carcinomas (ADCC). Labeling indices (LIs) for the two markers were calculated and compared. Results: MCM3 and Ki-67 LIs were significantly higher in MEC and ADCC compared to PA. The LI of MCM3 was significantly higher than that of Ki-67 in MEC and PA. There was no significant difference between the two markers in ADCC. A cut-off point of 8% with 74.3% sensitivity and 93.3% specificity for MCM3 was obtained to discern between benign and malignant tumors. Conclusions: These results suggest that MCM3 might be a useful proliferation marker for differential diagnosis and recognition of clinical behavior of salivary gland tumors.

• 공업화학
• /
• 제10권7호
• /
• pp.1020-1027
• /
• 1999

헤테로폴리산(HPW)을 표면적이 서로 다른 담체인 $SiO_2$ MCM-41, MCM-48에 담지농도와 소성온도를 달리하며 담지시켰다. X-선 회절분석, 질소 흡착법, 적외선 흡수 스펙트럼, $^{31}P$ 고체 핵자기 공명을 통해서 이 담지촉매의 특성을 조사하였다. IR과 NMR의 결과로부터 HPW가 담체안에서 케긴 구조를 유지하면서 존재함을 확인할 수 있었다. MCM-41의 경우에는 35 wt %, MCM-48의 경우에는 65 wt %로 담지시킨 경우에도 X-선 회절패턴에서 HPW 고유의 피크가 나타나지 않았으며, 이와 같은 특성을 통해서 HPW가 고분산 되어 있음을 알 수 있었다. Di, bis, tri-pentaerythritol의 가수분해 반응에서 이들 담지 촉매는 높은 촉매 활성을 보였으며 HPW, $HPW/SiO_2$보다 HPW/MCM-41, 48의 촉매 활성이 더 우수하였다.