• Clean Technology
• /
• v.14 no.1
• /
• pp.40-46
• /
• 2008

The dehumidifiers were prepared by the impregnation of the zeolites such as MCM 48, USY, beta on the silica ceramic paper. Their capacities for $H_2O$ absorption and regeneration of the bed were tested in a fixed bed reactor system. The $H_2O$ absorption capacities of the dehumidifiers impregnated with the zeolites were $1.5{\sim}2$ times higher than those without the zeolites. Especially, the humidifier using MCM 48 and colloidal silica showed an excellent capacity (42.1g $H_2O/g$ absorbent). It was found that the $H_2O$ absorption capacities of the dehumidifiers were improved because the amount of silica gel, the main component in absorbing $H_2O$, increased due to the large surface area and pore volume of the zeolites. In addition, $H_2O$ was easily desorbed from the dehumidifiers with zeolites at $80^{\circ}C$ of regeneration temperature and the desorption amount of $H_2O$ was the same as that absorbed. It was confirmed that the $H_2O$ absorption capacities of the dehumidifiers impregnated with zeolite were maintained without deactivation through the repeated cyclic experiments.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.57-57
• /
• 2000

Brazing characteristics of the LTCC(Low Temperature Co-fired Ceramics)/ Kovar(Fe-Ni-Co alloy) was investigated. Kovar is one of the typical material for the lid of MCM and packages. In case of alumina package, Brazing process is done by higher temperature profile than 800 $^{\circ}C$ and Ag-Cu alloy. But, LTCC has sintering temperature near 850 $^{\circ}C$. So, it is difficult to use the same process as alumina brazing. The adhesion strength of the brazed part is affected by brazing alloy and metallization properties between conductor pattern and LTCC material. We investigated brazing characteristics of the LTCC/Kovar using various brazing alloys(Ag-Cu, Au-Sn) and process conditions. And, we examined the influence of the glass contents in conductor on the brazing characteristics of the LTCC/Kovar.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.82-89
• /
• 2010

To obtain functional materials from a submerged culture of Hericium erinaceum, a suitable basal medium for flask culture was screened and the optimal culture conditions in a jar fermenter were investigated with the addition of ginseng extracts (GE) to the basal liquid medium. Of all tested basal liquid media, the mushroom complete medium (MCM) supplemented with 0.5% of GE produced the highest mycelial dry weight (MDW) of 5.91 g/L in the flask, which reached a plateau at $25^{\circ}C$, pH 5.5 after 10 days. The submerged culture conditions for the mass production of mycelia in a 50 L jar fermenter were also optimal at $25^{\circ}C$, pH 5.5, 120 rpm agitation speed and 0.4 vvm aeration rate. Under these conditions, the maximum MDW was produced, which reached a value of 4.28 g/L within 5 days. When we investigated the effects of the amount of GE in the MCM on the production of MDW in the jar fermenter, the addition of 5% GE (HE-GE-5) under the optimal culture conditions produced the maximum MDW (4.93 g/L). In addition, the crude polysaccharide of HE-GE-5 contained mainly neutral sugars (63.2%) with considerable amounts of uronic acid (19.3%) and a small amount of proteins (8.8%) and it had potent immunostimulation properties.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.19 no.1
• /
• pp.12-19
• /
• 2019

Purpose: Isolated methylmalonic acidemia (MMA) is an autosomal recessive inherited disorder of propionate metabolism. There are two subtypes of MMUT gene defects. $Mut^0$ represents complete loss of methylmalonyl-CoA mutase (MCM) activity while mut- is associated with residual MCM activity, which can be stimulated by hydroxocobalamin (OHCbl) supplementation. The objective of this study is to investigate cobalamin responsiveness and mutations present in Korean MMA population. Methods: We evaluated 10 MMA patients using somatic cell complementation analysis on their fibroblasts to measure MCM activity and vitamin B12 responsiveness for the optimal treatment. MMUT gene was sequenced to identify the MMA mutations. Results: For all patients, the incorporation of $[^{14}C]-propionate$ was low, and there was no response to OHCbl. The incorporation of $[^{14}C]-methyltetrahydrofolate$ and $[^{57}Co]-CNCbl$ fell within the normal range. There was adequate synthesis of methylcobalamin while the synthesis of adenosylcobalamin was low. The complementation analysis showed all patients were $mut^0$. The sequence analysis identified 12 different MMUT mutations, including 2 novel mutations, p.Gln267Ter and p.Ile697Phe, were identified. All the patients in this study had neonatal onset of symptoms, belonged to $mut^0$ complementation class, and as a result, showed no cobalamin responsiveness. Conclusion: No Korean MMA patient showed cobalamin responsiveness.

• Microbiology and Biotechnology Letters
• /
• v.34 no.3
• /
• pp.228-234
• /
• 2006

The culture conditions were investigated to maximize the production of laccase from Fomitella fraxinea mycelia. Among the tested media, mushroom complete medium (MCM) showed the highest production of the enzyme. The optimum culture medium was 2% dextrose, 0.4% $(NH_4)_{2}HPO_4$, 0.05% $Na_{2}HPO_{4}{\cdot}7H_{2}O$, and 0.05% KCl as carbon, nitrogen, phosphorus, and inorganic salt sources respectively. SDS-PAGE followed by laccase activity staining using 2,6-djmethoxyphenol as the substrate was performed to identify the laccase activity under culture conditions studied. Zymogram analysis of the culture supernatant showed a laccase band with a molecular mass of 50 kDa. The enzyme production from F. fraxinea was reached to the highest level after the cultivation for 10 days at $25^{\circ}C$ and initial pH 8. The enzyme activity of the culture supernatant was most active at $50^{\circ}C$ and pH 5.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.1
• /
• pp.43-48
• /
• 2006

In this Part 2, the grain growth processes of $Al_2O_3$ ceramics is numerically simulated using Monte Carlo method (MCM) and finite element method (FEM) and the pore sizes are analyzed. As the green ceramics whose thermal conductivities in high temperatures are generally low are sintered by the plasma heat and are rapidly cooled, the grain growth of the sintered body in the center is different from that in the outer. Also, even in the same sintering temperature, the pore size differs according to the pressing pressure. In order to prove the difference, the temperature distribution of the sintered body was analyzed using the finite element method and then the grain growth process associated with pressing pressures and relative densities was simulated using Monte Carlo method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1321-1329
• /
• 1993

Long time creep strength and life prediction of 1% Cr-Mo-V and 12% Cr rotor steel were performed by using round-bar type specimens under static load at 500-600.deg. C TTP (time temperature parameter), MCM (minimum commitment method) and ISM (initial strain method newly devised) as life prediction methods were investigated, and the results could be summarized as follows. (1) The minimum parameter of SEE (standard error) by TTP was proved as LMP (larson-miller parameter), and the minimum parameter of RMS (root mean squares), by data less than 10$^{3}$hrs was MHP (manson-haferd parameter). (2) The parameters of the minimum and the maximum strength values predicted in $10^{5}$hrs creep life of 1% Cr-Mo-V steel by TTP were LMP and MSP, respectively. In case of 12% Cr steel above $550^{\circ}C$ OSDP (orr-sherby-dorn parameter) was minimum and MSP (manson-succop parameter) was maximum, but below $550^{\circ}C$, the inverse phenomena was observed. On the other hand the creep strengths before $10^{3}hrs$ life by MCM were similar to those by TTP, but the strengths after $10^{3}hrs$ life were 10-25% lower than those by TTP. (3) Creep strengths by ISM were maximum 5% lower than those by TTP. Because $10^{5}hrs$ strengths were similar to those of the lower band by TTP, the ISM was safer than the TTP.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.1
• /
• pp.73-84
• /
• 2001

티타늄과 산소의 함량이 서로 다른 4가지의 합성 페롭스카이트형(perovskite-type) 광물(($K_2$$La_2$$Ti_{n}$/$O_{2n+4}$, n=3, 4, 5, 6; 14/mcm, 14/mmm, I42 m)을 대상으로 리트벨트(Rietveld)구조분석법을 실시하여 결정구조를 밝히고 티타늄함량에 따른 층상형 구조를 연구하였다. 4가지 합성시료에 대하여 구조분석을 실시한결과 대표적인 페롭스카이트형 광물인 토소나이트(taustonite, $La_{1-x}$ //$K_{x}$ /$TiO_3$, x<0.4)가 주성분으로 나타났으며 토스나이트내에 12개의 산소를 배위하는 A자리 양이온은 자리점유율에 의해 $La^{3+}$ 와 $K^{+}$ /의 치환관계를 보여준다 공간군은 14/mcm, 단위포는 a=5.505(1)~5.510(1)$\AA$, c=7.793(1)~7.796(1)$\AA$ V=236.25~236.66 $\AA^3$ 범위의 값을 갖는다. 구조의 정밀도를 나타내는 R지수를 살펴보면 $R_{B}$ 값은 5.31~9.10 S(GofF)값은 0.86~1.24로 각각 계산되었다. 12배위를 하는 A자리 양이온인 란탄과 산소의 평균거리는 2.755$\AA$이고 6배위를 하는 B자리 양이온인 티타늄과 산소의 평균거리는 1.948 $\AA$의 결과를 얻었다. 합성된페롭스카이트형 광물의 층상구조가 알려져 있지 않아 시뮬레이션을 통해 구조모델을 결정하였으며 그결과 n=3인 R-38시료에서만 두 종류의 층상 페롭스카이트($La_2$$K_2$$Ti_3$$O_{10}$ ) 구조 (A-type: 14/mmm, a=3.8178 $\AA$, c=29.9189 $\AA$, V=436.04 $\AA^3$, B-type: 142 m, a =3.8376 $\AA$, c=28.023 $\AA$, V=412.6 $\AA^3$)가 존재함을 확인하였으나 다른 시료에서는 토소나이트, 금홍석 외에 새로운 합성광물로 제파이트의 존재를 확인하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.49-53
• /
• 1999

In this study, the characteristics of the structure of buried type capacitor for RF multi- chip-module are investigated. We developed many kinds of structures to minimize the space of capacitor in module and the value of parastic series inductance without any loss in capacitance, and in this procedure the effect of vias especially position, size, number length are analyzed and optimized. This characteristics of structures are checked through HFSS(high frequency structure simulator) of HP, and the value of parastic series inductance is calculated by equivalent circuit analysis. And ensuing the result of simulation, we made buried type capacitors using LTCC (low temperature cofired ceramic) material. In measurement of this sample, we found out the effective and precise method can be applied to buried type and characteristics of vias and striplines added for measuring are quantified.

• Journal of Mushroom
• /
• v.2 no.4
• /
• pp.207-213
• /
• 2004

The results of examining characteristics of mycelial growth and culture condition for determining the condition of artificially culturing Fomitopsis pinicola are as follows. 1) Mycelial growth and density of F. pinicola. were the highest in the medium of PIDA(Pine Dextrose Agar;66.3mm/10d) followed by the order of GDA, PDA, CDA, PODA, ODA, YM, MCM, MEA(pH 4.7), CHA, and MEA(pH 4.7). 2) Optimal temperature for the mycelial growth and density of F. pinicola were shown to be $30^{\circ}C$, but the mycelia were dead at $40^{\circ}C$. the mycelial growth and density of KNAC9005 strains was the highest at $30^{\circ}C$(66.3mm/10d) followed by the order of 25, 20, 15, 35, 10, and $5^{\circ}C$. 3) Optimal pH for the mycelial growth and density of $40^{\circ}C$ was revealed to be 6.0(88.4mm/10d). above or below pH 6.0, the mycelial growth and density were shown to be retarded. 4) Optimal carbon, nitrogen and organic acid sources for the spawn growth of $40^{\circ}C$ were maltose(331mg/25ml/15d), peptone(347mg/25ml/15d), and glutamic acid(357mg/25ml/15d), respectively. Optimal level of biotin was 370mg/15d and optimal C/N ratio was 40.