• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.185-190
• /
• 2011

This paper describes design, fabrication, and evaluation of the conduction cooled high temperature superconducting (HTS) magnet for superconducting magnetic energy storage (SMES). The HTS magnet is composed of twenty-two of double pancake coils made of 4-ply conductors that stacked two Bi-2223 multi-filamentary tapes with the reinforced brass tape. Each double pancake coil consists of two solenoid coils with an inner diameter of 500 mm, an outer diameter of 691 mm, and a height of 10 mm. The aluminum plates of 3 mm thickness were arranged between double pancake coils for the cooling of the heat due to the power dissipation in the coil. The magnet was cooled down to 5.6 K with two stage Gifford McMahon (GM) cryocoolers. The maximum temperature at the HTS magnet in discharging mode rose as the charging current increased. 1 MJ of magnetic energy was successfully stored in the HTS magnet when the charging current reached 360A without quench. In this paper, thermal and electromagnetic behaviors on the conduction cooled HTS magnet for SMES are presented and these results will be utilized in the optimal design and the stability evaluation for conduction cooled HTS magnets.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.59-67
• /
• 2007

Recovery of acids from the waste etching solution of containing acetic, nitric and hydrofluoric acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. EHA(2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitric and hydrofluoric acid as a extraction agent was used to the experiment to obtain the process design data in separation procedure. From the experimental data and McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate each acid sequently from the mixed acids. The recovery yield was obtained above 90% for acetic acid from the acid mixtures, 90% for nitric acid from acetic acid extraction raffinate and then above 67% for hydrofluoric acid from final extraction raffinate.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.351-355
• /
• 2006

RSA 암호 시스템은 IC카드, 모바일 및 WPKI, 전자화폐, SET, SSL 시스템 등에 많이 사용된다. RSA는 모듈러 지수승 연산을 통하여 수행되며, Montgomery 곱셈기를 사용하는 것이 효율적이라고 알려져 있다. Montgomery 곱셈기에서 임계 경로 지연 시간(Critical Path Delay)은 세 피연산자의 덧셈에 의존하고 캐리 전파를 효율적으로 처리하는 문제는 Montgomery 곱셈기의 효율성에 큰 영향을 미친다. 최근 캐리 전파를 제거하는 방법으로 캐리 저장 덧셈기(Carry Save Adder, CSA)를 사용하는 연구가 계속 되고 있다. McIvor외 세 명은 지수승 연산에 최적인 CSA 3단계로 구성된 Montgomery 곱셈기와 CSA 2단계로 구성된 Montgomery 곱셈기를 제안했다. 시간 복잡도 측면에서 후자는 전자에 비해 효율적이다. 본 논문에서는 후자보다 빠른 연산을 수행하기 위해 캐리 전파 제거 특성을 가진 이진 부호 자리(Signed-Digit, SD) 수 체계를 사용한다. 두 이진 SD 수의 덧셈을 수행하는 잉여 이진 덧셈기(Redundant Binary Adder, RBA)를 새로 제안하고 Montgomery 곱셈기에 적용한다. 기존의 RBA에서 사용하는 이진 SD 덧셈 규칙 대신 새로운 덧셈 규칙을 제안하고 삼성 STD130 $0.18{\mu}m$ 1.8V 표준 셀 라이브러리에서 지원하는 게이트들을 사용하여 설계하고 시뮬레이션 하였다. 그 결과 McIvor의 2 방법과 기존의 RBA보다 최소 12.46%의 속도 향상을 보였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.709-712
• /
• 2008

RC super tall buildings are planned and constructed recently in domestic area. Concrete is characterized by time dependant material such as creep and shrinkage. For this properties of concrete, differential shortening is one of the main issues on super tall buildings construction. This study includes material research, which is performing as a pre design stage to solve differential shortening on Lotte Super Tower Jamsil core structure(50, 60, & 70 MPa). The major part of this study is composed with comparison and analysis between experimental data and predicted data on total shrinkage and total compliance which were used on design stage. Four models, ACI209R Model, Ba${\check{z}}$ant-Baweja B3 Model, CEB MC99 Model, & GL2000 Model, were employed to predict them. It also tries to seek a proper model for high strength and high performance concrete in the case of no concrete test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.31-36
• /
• 2004

In this paper, we proposed the new structure of the Rake Finger using Walsh Switch, the shared accumulator, and the pipeline-FWHT algorithm for reducing the signal processing complexity resulting from the increase of the number of data correlator. The function simulation of the proposed architecture is performed by Synopsys tool and the timing simulation is performed by Compass tool. The number of computational operation in the proposed data correlators is 160 additions and the conventional ones is 512 additions when the number of walsh code N=4. As a result, it is reduced about 3.2 times other than the number of computational operation of the conventional ones. Also, the result shows that the data processing time of the proposed Rake Finger architecture is 90,496[ns] and the conventional ones is 110,696[ns]. It is $18.3\%$ faster than the data processing time of the conventional Rake Finger architecture.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.535-548
• /
• 2006

To formally describe business process, many business process languages have been so far specified with different origins and goals such as XPDL, BPML and BPELAWS. Especially, XPDL proposed by WfMC has been widely used in various business process environments for a long time. On the other hand, the necessity of a standard graphical notation for a business process may create BPMN driven by BPMI. Because BPMN is composed of graphical constructs which can be used to graphically depict business process, BPMN-formed business processes should ultimately be converted to their corresponding semantically equivalent business process language(XPDL). Then, the business process languages can be consequently executed by business process engines. In this paper, we proposed a transformation mechanism from BPMN to XPDL for a business process. By this paper, We minimized the difference between process designers and process execution modules as reducing the gap of semantics between BPMN and XPDL.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.53-63
• /
• 2013

This paper presents an importance sampling(IS) embedded experimental frame(EF) design for efficient Monte Carlo (MC) simulation. To achieve IS principles, the proposed EF contains two embedded sub-models, which are classified into Importance Sampler(IS) and Bias Compensator(BC) models. The IS and BC models stand between the existing system model and EF, which leads to enhancement of model reusability. Furthermore, the proposed EF enables to achieve fast stochastic simulation as compared with the crude MC technique. From the abstract two case studies with the utilization of the proposed EF, we can gain interesting experimental results regarding remarkable enhancement of simulation performance. Finally, we expect that this work will serve various content areas for enhancing simulation performance, and besides, it will be utilized as a tool to understand and analyze social phenomena.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.47-55
• /
• 2006

Recovery of acids from the waste etching solution of containing nitric, hydrofluoric and acetic acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. With EHA (2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitic and hydrofluoric acid as extraction agent was carried on experiment to obtain the process design data in separation procedure. From the McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate the each acid sequently from the mixture acids. The recovery yield was obtained 90% above for acetic acid from the acid mixtures, 90% above for nitric acid from acetic acid extraction raffinate and then 67% above for hydrofluoric acid from final extraction raffinate.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.1
• /
• pp.18-23
• /
• 1989

An approach for robustness recovery of the observer-based control system is presented. The approach is developed by adding a loop with appropriate constant matrix to the observer-based closed-loop system. It will be shown that if there exists an added-loop matrix M satisfying F=MC for a feedback gain F and output matrix C, then the observer-based control systems have the same loop transfer functions as full-state feedback implementations, in other words, the former has the same relative stability and robustness as the latter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.819-820
• /
• 2016

Electrical power distribution is consists of high voltage, low voltage and motor control center(MCC). Motor control centers involves turning the motor on and off, it is configured electronic over current relay to detect a motor overcurrent flows. Existing electronic over current relay detects electrical fault such as overcurrent, undercurrent, phase sequence, negative sequence current, current unbalance and earth fault. However, it is difficult to detect mechanical fault such as locked rotor, motor stator and rotor and bearing fault. In this paper, we propose a condition monitoring and fault diagnosis system for electrical and mechanical fault detection of rotating machinery. The proposed system is designed with signal input and control part, system interface part and data acquisition board for condition monitoring and fault diagnosis, it was possible to detect electrical fault and mechanical fault through measurement and control of insulation resistance, locked rotor, MC counter and bearing temperature.