• Journal of Microbiology and Biotechnology
• /
• v.23 no.2
• /
• pp.237-245
• /
• 2013

Canthaxanthin (cx) is a potent antioxidant that is chemically synthesized at the industrial scale and has imperative applications in the cosmetic and feed industries. An orange pigmented mesophilic bacterium, designated as K44, was isolated from soil samples of Kargil, India. Biochemical tests, 16S rRNA gene sequencing, and FAME analysis of the bacterium indicated it to belong in the genus Dietzia and is distinct from human isolates. The strain showed 98% 16S rRNA gene sequence homology with Dietzia maris DSM 43102. High-performance liquid chromatography profile of the pigments isolated from K44 showed two major peaks absorbing at 465.3 and 475 nm. The liquid chromatography-mass spectrometry (LC-MS) analysis of both these peaks revealed their m/z to be 564. The molecular weights, LC-MS/MS fragmentation patterns, and ${\lambda}_{max}$ of these fractions corresponded to all-trans- (475 nm) and 9-cis-(465.3 nm) cx isomers. The antioxidant activities of cis- and trans-cx isomers isolated from this bacterium were found to differ, where the cis-isomer showed higher free radical, superoxide radical, and reactive oxygen species scavenging activities than the alltrans- isomer, suggesting that 9-cis-cx is more effective as an antioxidant than the all-trans-cx.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.981-984
• /
• 2008

The super tall building above 100 floors is required that each floor's height is more than 4 meters, and each core wall's thickness is more than 60cm. Therefore, for the successive accomplishment of super tall building, the full scale mock-up test was required. The test results are as follows; Real strength of core wall was satisfied with design strength at 28 days regardless of types of strength, and according to the consolidation effect, lower part's strength was a little higher than upper part's strength. Lateral force of HSC was evaluated with max. $4.5ton/m^2$, and hydration temperature of mock-up test was evaluated that maximun heat of central part revealed about $80^{\circ}C$ at 70MPa and $65^{\circ}C$ at 50MPa, and, the difference between inner and outter part revealed about $30^{\circ}C$ at 70MPa and $12^{\circ}C$ at 50MPa. Also, no crack by hydration temperature was not shown on the surface.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.397-402
• /
• 2020

Hologram can be categorized into analog and digital hologram but there's a clear limitation in expensive equipment and content realization for ordinary people to realize. In addition, it's required to conduct study on hologram contents with interaction added, escaping out of exiting stable format like endlessly repetitive contents or passive view through specific video. Therefore, this article aims to suggest fusion image system, especially focusing on floating hologram among similar holograms. Eight elements of hologram interaction are as follows: height of camera in a three-dimensional space, interval between 3D model, overlapped model, scale, animation, position, color and 3D model change. For the floating hologram, the audience can control by themselves in real time, the popular, active hologram contents-making methodology is suggested by making the best use of fusion image system and making floating hologram easily without using expensive hologram equipment. The image system developed in actual exhibition and feedback should be complemented to develop better hologram image system.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.147-155
• /
• 2010

A prediction model of resilient modulus($E_R$) was developed for recycled crushed-rock-soil mixtures. The evaluation of $E_R$, using the "orthodox" repeated loading tri-axial test, is not feasible for such a large-size gravelly material. An alternative method was proposed hereby using the subtle different modulus called nonlinear dynamic modulus. The prediction model was developed by utilizing in-situ measured shear modulus($G_{max}$) and its reduction curves of modeled materials using the large free-free resonant column test. A pilot evaluation of the model parameters was carried out for recycled crushed-rock-soil-mixture at a highway construction site near Gimcheon, Korea. The values of the model parameters($A_E,\;n_E,\;{\varepsilon}_r\;and\;{\alpha}$) were proposed as 9618, 0.47, 0.0135, and 0.8, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.179.2-179.2
• /
• 2013

A large-area RF-driven ion source is being developed at Germany for the heating and current drive of ITER device. Negative hydrogen ion sources are major components of neutral beam injection (NBI) systems in future large-scale fusion experiments such as ITER and DEMO. The RF sources for the production of positive hydrogen ions have been successfully developed at IPP (Max-Planck-Institute for Plasma Physics), Garching, for the ASDEX-U and W7-AS neutral beam heating systems. Ion sources of the first NBI system (NBI-1) for the KSTAR tokamak have been developed successfully with a bucket plasma generator based on the filament arc discharge, which have contributed to achieve a good plasma performance such as 15 sec H-mode operation with an injection of 3.5 MW NB power. There is a development plan of RF ion source at the KAERI to extract the positive ions, which can be used for the second NBI system (NBI-2) of the KSTAR and to extract the negative ions for future fusion devices such as Fusion Neutron Source and Korea-DEMO. The development progresses of RF ion source at the KAERI are described in this presentation.

• The Journal of Internal Korean Medicine
• /
• v.43 no.3
• /
• pp.423-435
• /
• 2022

Purpose: The purpose of this study was to confirm the clinical efficacy of Gyeongok-go. Methods: Public/Publisher MEDLINE (PubMed), Cochrane Central Register of Controlled Trials (CENTRAL), Excerpta Medica dataBASE (EMBASE), Research Information Sharing Service (RISS), ScienceON, Korean Traditional Knowledge Portal (KTKP), and China National Knowledge Infrastructure (CNKI) were searched for randomized controlled clinical trials administering Gyeongok-go as an intervention, published from inception to December 31, 2021. The risk-of-bias of the included trials was assessed with the Cochrane risk-of-bias tool for randomized trials version 2. From the experimental and control groups of the selected trials, the mean value (or rate) of each outcome was extracted and statistically compared. Results: Statistically significant mean differences were in VO₂max (MD 6.82), post-exercise heart rate (MD -8.76 at 5 min, -11.58 at 30 min, -14.6 at 60 min), senescence scale (MD -6.52), Th1 cells and Th2 cells in pulmonary tuberculosis (MD 2.79 and -1.64), yin-deficient and qi-deficient score (MD -9.64 and -9.76), and phlegm-dampness score (MD 5.56). Overall risk-of-bias was 20% low risk, 80% some concerns, and 0% high risk. There were no reports of adverse events. Conclusions: Gyeongok-go is likely to have the effect of improving cardiorespiratory endurance, increasing fatigue recovery ability, reducing senescence, and enhancing immune function in tuberculosis patients. Also, it is more suitable for those who are yin-deficient or qi-deficient, and those with phlegm-dampness probably need caution.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.41.2-42
• /
• 2020

Understanding how the filamentary structure plays a role in the formation of the prestellar cores and stars is a key issue to challenge. We have observed two prestellar cores in surrounding filamentary environments in 13CO, C180 (3-2) and HCO+ (4-3) molecular lines with the Heterodyne Array Receiver Program (HARP) of the James Clerk Maxwell Telescope (JCMT), in order to search for the evidence related to the possible flow motions along the filament and/or the radial accretion (or infalling motions) of gas material toward the dense cores from their surrounding filamentary cloud. In L1544, the velocity gradient of 1.6 km s-1 pc-1 toward the core was measured in a small branch of filament lying on a radial direction of main filament while no velocity gradient along the main axis of filament in both 13CO and C18O lines. In L694-2, we found the velocity gradient of 0.6 km s-1 pc-1 along the filament in only 13CO lines. The projected accretion rate of ~6 M◉ Myr-1 was estimated in both cases. The infall (or radially contracting) velocity of gas material was measured ~0.16 km s-1 in both 13CO and HCO+ lines and in both L1544 and L694-2, which leads to estimate a mass infall rate of ~20 M◉ Myr-1. Our analysis suggests that our targets are at a stage where the gravitational contraction dominates the mass accretion through the surrounding filamentary cloud. This is consistent with the fact that our targets are highly evolved prestellar cores on a verge of star formation. More detailed results will be presented at the meeting.

• Journal of Korea Entertainment Industry Association
• /
• v.5 no.1
• /
• pp.127-133
• /
• 2011

Characters in natural image are an important information with various context. Previous work of character region detection algorithms is not detect of character region in case of image complexity and the surrounding lighting, similar background to character, so this paper propose an method of character region detection in natural image using edge and connected component by morphological reconstructions. Firstly, we detect edge using Canny-edge detector and connected component with local min/max value by morphological reconstructed-operation in gray-scale image, and labeling each of detected connected component elements. lastly, detected candidate of text regions was merged for generation for one candidate text region, Final text region detected by checking the similarity and adjacency of neighbor of text candidate individual character. As the results of experiments, proposed algorithm improved the correctness of character regions detection using edge and connected components.

• Journal of Fashion Business
• /
• v.27 no.5
• /
• pp.60-77
• /
• 2023

The scale of the industry utilizing the Metaverse platform is gradually growing around the world. Fashion brands are also starting to utilize the Metaverse platform as a new market to replace the next e-commerce platform by targeting new consumers, MZ generation, and even Alpha generation. In this study, a real K-fashion designer's outfit was made into a 3D outfit using CLO 3D program to express it in a new market, the Metaverse 3D platform. It was then compared with a real outfit. An avatar prototype was completed using Max program to simulate the 3D digital fashion outfit and produce an avatar through an optimization process. The 3D outfits showed the same level of results as the actual outfits in terms of fabric surface, material texture, drapability, overall outfit, details, and trimmings. In addition, we proposed a 2D work on total styling suggestion and modeling to secure data sets for future AI-based styling services. In conclusion, this study revealed that actual outfits and 3D outfits had the same results. It is significant that it can be a sample work to build a styling data set through styling suggestion and content production as a significant amount of styling DB construction will be required before AI styling automation services.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.179-183
• /
• 2002

This study was carried out to investigate the influence of medium composition for in vitro mass propagation of Lycoris squamigera Max. After the disks of short stems, segments of leaf within bulb and scale were cultured on MS basal medium supplemented with various plant growth regulators, they were examined for the extent of callus formation, shoot and root regeneration. In the culture of stem disks, adventitious shoots were regenerated from the basal tissue of bulb scales, and combined medium of 1.0 mg/L 2,4-D or NAA＋2.0 mg/L BA or kinetin showed the the best response and 4∼6 shoots per explant formed. In the culture of leaf segments within bulbs, both MS medium supplemented with 1.0 mg/L NAA＋2.0 mg/L TDZ and with 1.0 mg/L 2,4-D＋1.0∼2.0 mg/L BA were produced callus profusely on the base of leaf tissue and 3∼6 shoots were regenerated per explant. In the scale segments culture, calli were produced on the basal tissue on medium with 1.0 mg/L 2,4-D＋1.0∼2.0 mg/L BA. The best result were shown on MS medium with 1.0 mg/L NAA＋2.0 mg/L TDZ, and 1.0 mg/L 2,4-D＋1.0∼2.0 mg/L BA. Maximum number of regenerated shoots was up to 10∼12. Adventitious root formation from explants were formed profusely on MS medium with 1.0 mg/L NAA＋2.0 mg/L kinetin. The most desirable method for mass propagation of plantlets was the shoot regeneration from scale segments then subsequently subcultured on medium for rooting.