• 제목/요약/키워드: MAX phase

검색결과 310건 처리시간 0.032초

부호화된 4+12+16 APSK를 위한 근사화된 연판정 디매핑 알고리즘 (Approximated Soft-Decision Demapping Algorithm for Coded 4+12+16 APSK)

  • 이재윤;장연수;윤동원
    • 한국통신학회논문지
    • /
    • 제37A권9호
    • /
    • pp.738-745
    • /
    • 2012
  • 본 논문에서는 부호화된 4+12+16 APSK에 대하여 낮은 복잡도를 갖는 근사화된 연판정 디매핑 알고리즘을 제안한다. 제안된 알고리즘을 도출하기 위해 4+12+16 APSK의 결정 경계를 근사화하고, 그 근사화된 결정 경계로부터 각 비트에 대한 LLR 값을 계산한다. 새롭게 제안된 알고리즘은 기존의 max-log 알고리즘보다 곱셈 계산 수를 상당히 줄여 수신기 복잡도를 크게 낮출 수 있으며, 낮은 복잡도로 인한 BER 성능 열화를 약 1.1dB 이하로 줄일 수 있다.

Magneto-transport Properties of La0.7Sr0.3Mn1+dO3-Manganese Oxide Composites Prepared by Liquid Phase Sintering

  • Kim, Hyo-Jin;You, Jae-Hyoung;Choi, Soon-Mi;Yoo, Sang-Im
    • Journal of Magnetics
    • /
    • 제19권3호
    • /
    • pp.221-226
    • /
    • 2014
  • Significantly enhanced low-field magnetoresistance (LFMR) and maximum dMR/dH {$(dMR/dH)_{max}$} values were successfully achieved from $La_{0.7}Sr_{0.3}MnO_3$(LSMO)-manganese oxide composite samples prepared by liquid phase sintering, compared with those of the same composites prepared by solid state reaction. For this study, pure LSMO and LSMO-manganese oxide composites with various nominal compositions of (1-x)LSMO-$xMn_2O_3$ (x = 0.1, 0.2, 0.3, 0.4, and 0.8) were sintered at $1450^{\circ}C$, above the eutectic temperature of $1430^{\circ}C$, for 1 h in air. The highest LFMR value of 1.28% with the highest $(dMR/dH)_{max}$ value of 21.1% $kOe^{-1}$ was obtained from the composite sample with x = 0.3 at 290 K in 500 Oe. This enhancement of LFMR and $(dMR/dH)_{max}$ values is ascribed to efficient suppression of magnetic disorder at the LSMO grain boundary, by forming a characteristic LSMO-manganese eutectic structure.

상변화물질을 이용한 열방어체계의 수치해석 연구 (A numerical analysis of the PCM applied Thermal Protection System)

  • 오창묵;유영준;이형주;민성기
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.622-627
    • /
    • 2010
  • 본 논문은 내외부에 열원이 있는 시스템에 상변화물질(PCM, Phase Change Material)을 적용한 경우를 수치해석으로 분석한 것으로 컨넥터가 없는 경우와 있는 경우에 대하여 분석한 것이다. 각각의 경우에 $T_{max}$ 열원만 있을 경우와 $T_{max}$$710W/m^2$ 열원이 동시에 있을 경우가 고려되었다. 연구 결과 벽면에서의 열전달, 시간에 따른 PCM 온도변화 그리고 내부온도의 변화를 정리하였으며 그 결과 시스템의 구성품과 열전달 방향 및 열원의 종류에 따라 PCM의 잠열 시간이 달라진다는 점을 알 수 있었다.

  • PDF

기계적합금법으로 제조한 NdFeB계 분말의 자기적 성질 (Magnetic Properties of NdFeB Powders Prepared by Mechanical Alloying)

  • 김택수;황연;이효숙
    • 한국자기학회지
    • /
    • 제8권4호
    • /
    • pp.210-215
    • /
    • 1998
  • Ball Mill을 이요하여 Ar 분위기에서 기계적합금법으로 Nd15Fe77B8과 Nd16Fe76B8 분말을 제조하고, 제조된 분말을 연속 진공열처리 시킨 후 열처리온도에 따른 상변화 및 자기적 성질을 조사하엿다. 450시간 볼밀도처리한 Nd15Fe77B8과 Nd16Fe76B8 합금 분말에서 Nd와 B의 피크는 보이지 않고 전체적으로 $\alpha$-Fe 결정상만 존재하고 있었으며, 이를 $700^{\circ}C$에서 30분간 열처리를 시키면 고상반응에 의하여 Nd2Fe14B와 소량의 NdB6이 흔재된 상을 얻을 수 있었다. $700^{\circ}C$로 열처리 한 Nd16Fe76B8 합금 분말은 iHc9.9kOe, Bs, 12.9 KG, (BH)max 10.1 MGOe의 자기적 성질을 나타내었다.

  • PDF

DYNAMICAL CHARACTERISTICS OF SUNSPOT CHROMOSPHERES II. ANALYSIS OF CA II H, K AND ${\lambda}8498$ LINES OF A SUNSPOT (SPO 5007) FOR OSCILLATORY MOTIONS

  • Yoon, Tae-Sam;Yun, Hong-Sik;Kim, Jeong-Hoon
    • 천문학회지
    • /
    • 제28권2호
    • /
    • pp.245-253
    • /
    • 1995
  • We have analyzed the time series of Ca II H,K and ${\lambda}8498$ line profiles taken for a sunspot (SPO 5007) with the Echelle spectrograph attached to Vacuum Tower Telescope at Sacramento Peak Solar Observatory. Each set of spectra was taken simultaneously for 20 minutes at a time interval of 30 seconds. A total of 40 photographic films for each line was scanned by a PDS at Korea Astronomy Observatory. The central peak intensity of Ca II H ($I_{max}$), the intensity measured at ${\Delta}{\lambda}=-0.1{\AA}$ from the line center of ${\lambda}8498(I_{{\lambda}8489})$, the radial velocity ($V_r$) and the Doppler width (${\Delta}{\lambda}_D$) estimated from Ca II H have been measured to study the dynamical behaviors of the sunspot chromosphere. Fourier analysis has been carried out for these measured quantities. Our main results are as follows: (1) We have confirmed the 3-minute oscillation being dominant throughout the umbra. The period of oscillations jumps from 180 sec in the umbra to 500 to 1000 sec in the penumbra. (2) The nonlinear character of the umbral oscillation is noted from the observed sawtooth shaped radial velocity fluctuations with amplitudes reaching up to $5{\sim}6\;km/sec$. (3) The spatial distribution of the maximum powers shows that the power of oscillations is stronger in the umbra than in the penumbra. (4) The spatial distributions of the time averaged < $I_{max}$ > and < $V_r$ > across the spot are found to be nearly axially symmetric, implying that the physical quantities derived from the line profiles of Ca II H and ${\lambda}8498$ are inherently associated with the geometry of the magnetic field distribution of the spot. (5) The central peaks of the CaII H emission core lead the upward motions of the umbral atmosphere by $90^{\circ}$, while no phase delay is found in intensities between $I_{max}$ and $I_{{\lambda}8498}$, suggesting that the umbral oscillation is of standing waves.

  • PDF

Effects of High-Energy Ball Milling and Sintering Time on the Electric-Field-Induced Strain Properties of Lead-Free BNT-Based Ceramic Composites

  • Nga-Linh Vu;Nga-Linh Vu;Dae-Jun Heo;Thi Hinh Dinh;Chang Won Ahn;Chang Won Ahn;Hyoung-Su Han;Jae-Shin Lee
    • 한국전기전자재료학회논문지
    • /
    • 제36권5호
    • /
    • pp.505-512
    • /
    • 2023
  • This study investigated crystal structures, microstructures, and electric-field-induced strain (EFIS) properties of Bi-based lead-free ferroelectric/relaxor composites. Bi1/2Na0.82K0.18)1/2TiO3 (BNKT) as a ferroelectric material and 0.78Bi1/2(Na0.78K0.22)1/2TiO3-0.02LaFeO3 (BNKT2LF) as a relaxor material were synthesized using a conventional solid-state reaction method, and the resulting BNKT2LF powders were subjected to high-energy ball milling (HEBM) after calcination. As a result, HEBM proved a larger average grain size of sintered samples compared to conventional ball milling (CBM). In addition, the increased sintering time led to grain growth. Furthermore, HEBM treatment and sintering time demonstrated a significant effect on EFIS of BNKT/BNKT2LF composites. At 6 kV/mm, 0.35% of the maximum strain (Smax) was observed in the HEBM sample sintered for 12 h. The unipolar strain curves of CBM samples were almost linear, indicating almost no phase transitions, while HEBM samples displayed phase transitions at 5~6 kV/mm for all sintering time levels, showing the highest Smax/Emax value of 700 pm/V. These results indicated that HEBM treatment with a long sintering time might significantly enhance the electromechanical strain properties of BNT-based ceramics.

9.4T MRI FLASH Sequence에서 마우스의 뇌 조영증강 검사를 위한 적정 Echo phase (Optimal Echo phase of FLASH sequence for Brain Enhancement scan of mouse at 9.4T MRI system)

  • 정현근;김민기;남기창;정현도;안치권;김호철
    • 전자공학회논문지
    • /
    • 제54권7호
    • /
    • pp.115-124
    • /
    • 2017
  • 본 연구에서는 9.4T MRI의 FLASH 시퀀스를 이용하여 마우스의 뇌 조영증강 검사 시 적정한 echo phase를 알아보고자 하였다. 이에 따른 정량화를 위하여 가도테리돌로 제작된 MR팬텀 실험을 진행하였다, 서로 다른 몰 농도의 가돌리늄으로 구성된 각 세 개의 팬텀을 제작하여 마우스 뇌 검사에 사용하고 있는 FLASH 시퀀스의 echo phase에 변화를 주어 시행한 후, 이에 대한 분석을 진행하였다. 팬텀실험결과 SSI(Saline's Signal Intensity)는 $6{\pi}$부터 $28{\pi}$까지 33개 각각의 phase에서 25~27[a.u]를 보였고, RSP(Response Start Point)는 각각 30~100 mmol을 기록하였다. MPSI(Max Peak Signal Intensity)는 47~52 [a.u]를 보였고, MPP(Max Peak Point)는 0.8~9 mmol로 기록되었다. EPMS(Enhancement Percentage of MSI to SSI)는 80.8~108.0%로 기록되었고, ASIMP(Average of SI according to Mol concentration on each Phase)은 21.1~31.8 [a.u] 사이에서 형성되었다. 마지막으로 ORA(Occurence Rate of Artifact)는 아티팩트 발생유무에 따라 +1과 -1로 표기하였다. 본 연구를 통하여 9.4T MRI에서의 FLASH 시퀀스의 조영증강 정도를 정량화 할 수 있었고, 마우스의 뇌 조영증강 검사 시 적정 echo phase를 산출 할 수 있었다.

Deposition and evaluation of MoNx films deposited by magnetron sputtering

  • Ma, Yajun;Li, Shenghua;Jin, Yuansheng;Pan, Guoshun;Wang, Yucong;Tung, Simon C.
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
    • /
    • pp.135-136
    • /
    • 2002
  • Molybdenum Nitrided (MoNx) films were deposited by DC planar magnetron sputtering. Silicon wafers and real nitrided stainless steel piston rings are employed as substrates. 12 different combinations of nitrogen and argon partial pressure, from 1:7 to 7:1, were applied to deposit MoNx films. X-ray diffraction (XRD) was used to determine the phase structures of films. When nitrogen vs. argon partial pressure is 1:7, the film is mainly $Mo_2N$ phase. With increase of nitrogen partial pressure, MoN phase emerges, but $Mo_2N$ phase still exists. Composition analysis with atomic emission spectrometry (AES) also agreed with this. The films have very high nanohardness (max 2400Hv) and good adhesion to the substrates.

  • PDF

Phase Equilibria and Reaction Paths in the System Si3N4-SiC-TiCxN1-x-C-N

  • H.J.Seifert
    • 한국분말재료학회지
    • /
    • 제6권1호
    • /
    • pp.18-35
    • /
    • 1999
  • Phase equilibria in the system Si3N4-TiC-TiCxN1-x-C-N were determined by thermodynamic calculations (CALPHAD-method). The reaction peaction paths for Si3N4-TiC and SiC-TiC composites in the Ti-Si-C-n system were simulated at I bar N2-pressure and varying terpreatures. At a temperature of 1923 K two tie-triangles (TiC0.34N0.66+SiC+C and TiC0.13N0.87+SiC+Si3N4) and two 2-phase fieds (TiCxN1-x+SiC; 0.13

Bioequivalence of Mepiril Tablet to Amaryl Tablet (Glimepiride 2 mg) by Liquid Chromatography/Electrospray Tandem Mass Spectrometry

  • Lee, Heon-Woo;Cho, Sung-Hee;Park, Wan-Su;Im, Ho-Taek;Rew, Jae-Hwan;Lee, Kyung-Tae
    • Journal of Pharmaceutical Investigation
    • /
    • 제35권4호
    • /
    • pp.287-293
    • /
    • 2005
  • The purpose of the present study was to evaluate the bioequivalence of two glimepiride tablets, Amaryl tablet (Handok & Aventis Korea, reference drug) and Mepiril tablet (Myungmoon Pharm. Co., Ltd., Korea, test drug), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (glibenclamide) to human plasma, plasma samples were extracted using 1mL of methyl tertiary butyl ether. Compounds extracted were analyzed by reverse-phase HPLC with multiple reaction monitoring (MRM) mode analyte detection. This method for determination glimepiride proved accurate and reproducible, with a limit of quantitation of 2 ng/mL in human plasma. Twenty-four healthy male Korean volunteers received each medicine at the glimepiride dose of 2 mg in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of glimepiride were monitored by a LC-MS/MS for over a period of 12 hr after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 12 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for Amaryl/Mepiril were log 0.9583-log 1.1357 and log 1.0570-log 1.2376, respectively. These values were within the acceptable bioequivalence intervals of log 0.80-log 1.25. Taken together, our study demonstrated the bioequivalence of Amaryl and Mepiril with respect to the rate and extent of absorption.