• Journal of Hydrogen and New Energy
• /
• v.24 no.5
• /
• pp.393-400
• /
• 2013

The air supply system has a significant effect on the efficiency of polymer electrolyte membrane fuel cell (PEMFC) systems. The performance and efficiency of automotive PEMFC systems are greatly influenced by their air supply system configurations. This study deals with the system simulation of automotive PEMFC systems using MATLAB/Simulink framework. In this study, a low-pressure operating PEMFC system adopting blower sub-module (turbo-blower) is modeled to investigate the effects of stack operating temperature and air stoichiometry on the parasitic power and efficiency of automotive PEMFC systems. In addition, the PEMFC net system efficiency and parasitic power of air supply system are mainly compared for the two types (low-pressure operating and high-pressure operating) of automotive PEMFC systems under the same net power conditions. It is suggested that the obtained results from this system approach can be applied for establishing the novel operating strategies for FC vehicles.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.210-216
• /
• 2009

Distributed Generation (DG) is predicted to play a important role in electric power system in the near future. insertion of DG system into existing distribution network has great impact on real-time system operation and planning. It is widely accepted that micro turbine generation (MTG) systems are currently attracting lot of attention to meet customers need in the distributed power generation market. In order to investigate the performance of MT generation systems, their efficient modeling is required. This paper presents the modeling and simulation of a MT generation system suitable for stand-alone operation. The system comprises of a permanent magnet synchronous generator driven by a MT. A brief description of the overall system is given, and mathematical models for the MT and permanent magnet synchronous generator are presented. Also, the use of power electronics in conditioning the power output of the generating system is demonstrated. Simulation studies with MATLAB/Simulink have been carried out in stand-alone operation mode of a DG system.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.351-353
• /
• 2010

본 논문에서는 쉽고 빠르게 정확한 리튬 이온 배터리 모델을 구현할 수 있는 방법을 제시하고 있으며, 구현된 모델을 MATLAB(R)/Simulink(R)환경에서 검증한다. 모델을 구현함에 있어서 절차를 간소화하기 위해 비선형 개방 전압은 배터리 충전 및 방전 전압의 평균으로 근사하고, 배터리 내부 비선형 파라미터는 방전 초기에 발생하는 과도응답을 측정한 이산 데이터를 곡선 접합하여 구한다. 구현된 모델을 이용하여 시뮬레이션을 하고 이를 실험 데이터와 비교해본 결과, 평균 절대오차는 기존 연구보다 0.1% 낮은 0.091%로 측정되었다. 측정된 오차의 수준은 본 논문에서 제안한 방법이 파라미터 추출에 필요한 시간을 단축하고 시뮬레이션 모델을 쉽게 구현 가능하게 함에도 불구하고 여전히 리튬 이온 배터리의 출력 특성을 정확하게 예측함을 보여준다.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.151-158
• /
• 2019

In this paper, we construct a Virtual D-STATCOM using a number of grid-connected inverters installed in solar and wind power plants and compensate the reactive power of the cable depending on the reactive power of the load of the power distribution system and the distance to the power distribution line We propose a method to compensate the reactive power of the PCC stage near the substation without installing the existing single large capacity D-STATCOM. The proposed method is verified by Matlab Simulink simulation and its operation principle and reactive power compensation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.1-9
• /
• 2022

The aircraft targeted in this study is a vertical take-off and landing aircraft with 4 to 5 passengers, and the propulsion system for the aircraft is a distributed hybrid propulsion system that uses a gas turbine engine and a battery pack as the main power source to supply the power required by multiple motors. In this study, a design/analysis platform for a hybrid propulsion system was developed using the MATLAB/Simulink program based on the preliminary design results. Through simulation analysis, the output characteristics and operating range of each power source according to the mission profile were confirmed, and through this, the feasibility of the preliminary design result was confirmed.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.1-8
• /
• 2023

This paper presents the control strategy of Auto-leveling equipment (ALE) of Multi-function radar (MFR) for vehicle using Embedded System. MFR implements surveillance patrol missions such as surface-to-air missiles and fighters with constant rotation. ALE consists of 4 Auto-leveling modules (ALM) and retains the stability with maintaining level. The gradient of vehicle can be measured and controlled by embedded systems. This paper contributes for improvement the system design with the ALM 1 set modeling. The validity of the modeling is verified using MATLAB/Simulink.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.1005-1013
• /
• 2012

In this paper, the induction motor in indirect vector control method modeling, from indirect vector control method it undergoes an influence to the $1/{\tau}$. When changing a rotor resistance because being like this quality Matlab/Simulink where it will make what kind of effect in speed presumption it led proposed control system used microprosser TMS320C31 DSP for high speed processing. The effectiveness of the proposed system is verified by simulation and experimental results. This result shows highly characteristic speed estimation and robust character of load regulation. and the flux which it follows in change of parameter and speed presumption it was under simulation and get the good result which it comes to get it analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.603-610
• /
• 1998

The purpose of this paper is to describe how the characteristics of the movement of cars can be modeled with computers. For this, we use Matlab and simulate the characteristics of the cruise-speed at which the car is driven using the Fuzzy PID controller. The model of the car is designed by M-S(Matlab-Simulink) and each parameter of PID is estimated automatically by the Fuzzy controller. The simulation of the car is carried out on straight base tracks, and then this is compared and analyzed with the simple Fuzzy controller and the simple PID controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.878-884
• /
• 2015

In this paper, Power Management System(PMS) simulator for Liquid Nature Gas Carrier(LNGC) is developed. Major components of power system for LNGC, such as generator, diesel engine and governor, transformer, circuit breaker, and 3 phase loads models are built based on MATLAB/SIMULINK. With these designed major parts, PMS simulator modeling is carried out. Based on MATLAB/Graphical User Interface, PMS simulator control for LNGC, and Human Machine Interface for monitoring is designed. PMS simulator for LNGC carries out simulation according to sequence of characteristics analysis. By comparing results of predicted simulation for each sequence to that of characteristics analysis, the reliability of PMS simulator for LNGC will be verified.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.162-163
• /
• 2011

This paper presents the system dynamics methodology for modeling and control the production/inventory system. Under system dynamics point of view, we can apply some production/inventory policies as if we use the control laws for dynamics systems, then the behavior of system is analyzed and evaluated to improve the performance of production/inventory system. We also utilize the hybrid modeling method for the dynamic of production system with the combination of Matlab/Simulink and Matlab/Sateflow. Finally, the numerical simulation results are carried out in Matlab/Simulink environment and compare with the results from other works. It is shown that our approach can obtain some good performances (such as operational cost, stability of inventory, customer service level).