• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.629-634
• /
• 2016

This paper describes the implementation of a ZigBee sensor node that can be utilized as a multiband and machine to machine (M2M) communication gateway. The IEEE 802.15.4-2003 standard was used as the wireless network frequency band. Ember's Type EM357 SoC was used as the transmission and reception device to perform the communication function, and it was also used for both the main M2M gateway and the sensor node. For the implementation of the operating protocol, EmberZNet Stack 4.5.4 from the Ember Corporation was used. The measurement of the reception sensitivity in the receiving module and the actual output signal from the reference were obtained from the transmission of a packet, and the packet included the M2M gateway within the attached ZigBee sensor. The packet error rate was measured as 0% with a -98 dBm reception sensitivity at the ZigBee frequency. In addition, excellent current characteristics of the ZigBee modules were shown by the implementation of the low-power circuit.

• Journal of Information Technology and Architecture
• /
• v.11 no.3
• /
• pp.261-270
• /
• 2014

The utilization of the Mobile Government system is having more than a few challenges including complexity of different mobile technologies, determining interoperability among existing systems and infrastructures, and establishing services with secured networks. To get over those challenges, integrated standard, innovative and comprehensive system architecture is required by the M-Government. Hence this study proposed reference EA framework for M-Government system in order to avoid unnecessary duplication of infrastructure deployment and integrate services among different government instructions. The study based on literature review, and current infrastructure and mobile network situation for delivering Government services of Mongolia. The study recommends innovative m-Government system framework used EA, and scope covered mobile service delivery area centered on G4C and C2G perspectives. The Federal Enterprise Architecture Framework has used in this research, and the proposed system service architecture defines the interoperable standards, infrastructure components, applications, and technologies for government institutions in Mongolia to aid interactions necessity among them to provide m-Service.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.35-47
• /
• 2020

Immediate and serious attention on CGF(computer generated forces) behavior modeling for defense M&S (modeling & simulation) is required in response to the reduction in the number of troops and development of 4^th industrial technologies. It is crucial for both military person and engineer to understand such technologies. The research aims to provide guidelines for establishment of research direction on CGF behavior modeling. We investigate traditional and/or novel methodologies such as rule-based, agent-based, and learning-based method. Discussions on future direction of applicable area and strategies are followed. We expect that the research plays a key role for understanding CGF behavior modeling.

• Journal of Multimedia Information System
• /
• v.8 no.1
• /
• pp.57-60
• /
• 2021

Industry 4.0 is continuous automation by applying the latest smart technologies to traditional manufacturing industries. It means that large-scale M2M (Machine-to-Machine) communication and IoT (Internet of Things) technologies are well integrated to build efficient production systems by analyzing and diagnosing various issues without human intervention. Edge computing is widely used for M2M services that handle real-time interactions between devices at industrial machinery tool sites. Here, secure data transmission is required while interacting. Thus, this paper focused on a method of creating and maintaining secret key and security tag used for message authentication between end-devices and edge-device.

• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1863-1870
• /
• 2023

Molybdenum-99 (⁹⁹Mo) is used for preparing Technetium-99 m (^99mTc), which is the most widely used isotope in nuclear medicine. In this work, a study for ⁹⁹Mo production based on a high-power electron accelerator has been performed as an alternative approach to produce ^99mTc. In this study, Monte Carlo MCNPX2.6 code has been used to examine a novel idea of simultaneous hybrid production of ⁹⁹Mo via both photoneutron and neutron capture reactions using an electron accelerator in heavy water tank. It is expected that this conceptual design including an arrangement of metallic plates of ¹⁰⁰Mo and ⁹⁸Mo produces total activity of 97.5 Ci at the end of 20-h continuous e-beam irradiation (30 MeV, 10 mA).

• Journal of Information Technology Services
• /
• v.11 no.3
• /
• pp.241-255
• /
• 2012

Recently, smart home environments which provide complex services through smart appliances are becoming realized, due to the advances in connected devices and network technologies. Current smart home environments are mostly restricted, because of difficultly of integration of heterogeneous smart appliances. Therefore radical service integration is impracticable. In this paper, we analyze and implement Machine-to-Machine (M2M) standards which are established by European Telecommunications Standards Institute (ETSI) for integrating heterogeneous devices and services. Smart Home is one of the areas covered by ETSI M2M standards, however these standards are just standardized, so adaption and assessment in smart home are not proved yet. Therefore, this paper analyze ETSI M2M standards by focusing the data transport model and evaluate by selecting the most commonly used smart home scenarios and by implementing ETSI M2M standards compatible smart metering system. In some points ETSI M2M standards are not efficient because of its complexity of structure, however ETSI M2M provides sophisticated features for integrating M2M which are appropriate to adopt diverse smart home environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1112-1114
• /
• 2005

Core position of the M2M (Machine to Machine) is device integration fusion using an emerging wireless and next internet technologies as well as IEEE 802.x, Bluetooth, Zigbee, DMB, Wibro etc. for ubiquitous environment that is complementary with IT839 strategy from Ministry of Information & Communication. This paper define and deploy about major functional requirements of M2M devices and middleware for how to it works, worldwide M2M technology trend & activities with its current & future application in manufacturing area that is called u-Manufacturing (Ubiquitous Manufacturing).

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.69-75
• /
• 2018

Recently, various convergence technologies are attracting attention due to the block chain innovation technology in the M2M environment. Although the block-chain-based technology is known to be secure in its own right, there are various problems such as security and weight reduction in various M2M environments connected with this. In this paper, we propose a new lightweight method for the hash tree generation of block chains to solve the lightweight problem. It is designed considering extensibility without affecting the existing block chain. Performance analysis shows that the computation performance increases with decreasing the existing hash length.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4153-4159
• /
• 2011

M2M can provide the bi-directional services between applications and objects which have the attached telecommunication module. It consists of the objects, platform, and (web based) applications. M2M can realize In-Transit Visibility and Asset Visibility combined with GIS. Although many applications of M2M, such as metering, monitoring, controlling, tracking et al., are being serviced, the interoperability among the M2Ms is not considered. In this paper, we described the interoperability. Specially, ROA, which is the state of art technology in mash-up, more than SOA, and URN, which is based on Open API in RESTful service, more than URL are studied. As the message protocol between platform and applications, MPM was defined.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.28 no.9
• /
• pp.28-39
• /
• 2010