• Solar Energy
• /
• v.9 no.1
• /
• pp.14-21
• /
• 1989

Preparation of $TiO_2$ Film by the Dip-coating Method and its Application to photo-electrochemical Electrodes. $TiO_2$ film of n-type semiconductor has been of great interest as a material for solar energy conversion. For its practical application, the dip-coating method has been applied to prepare $TiO_2$ (anatase) film on the nesa glass substrate. Films up to about $1.8{\mu}m$ in thickness can be obtained by repeating the operation, dipping $\to$ pulling up $\to$ drying $\to$ heating at $500^{\circ}C$ for 10 minute. Heating temperature at $500^{\circ}C$ was adopted to convert $TiO_2$ gels into $TiO_2$ crystalline films. The $TiO_2$ films showed the maximum photocurrent ($14mA/cm^2$) at the film thickness of about $1.8{\mu}m$. It was also found that the additional heating at $500^{\circ}C$ for about 20 minutes improved remarkably the photo current of the $TiO_2$ films.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.76-88
• /
• 2016

Machine to Machine (M2M) is a technology that presents communication between two or more devices with or without human intervention. M2M communications can be applied for various use cases such as environmental monitoring, health care, smart metering and etc. In most use cases, M2M utilizes sensor nodes to collect data from the intended environment and the data is transmitted back to M2M application through other devices (gateways, sink nodes). In some use cases, M2M devices are being designed to store and process sensor data for improving the reliability of the service; Gateways and sink nodes are also intended to store and process the gathered data from sensor nodes. This kind of approach is very challenging for both academy and industry. In order to enhance the performance of this approach, in this paper, we propose our Common Service Security Platform (CSSP) for M2M devices and gateways. CSSP platform presents solutions for the devices and gateways by making them operate more accurately and efficiently. Besides, we present a comparative analysis of communication protocols and present their performance in accordance with selected metrics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2661-2667
• /
• 2013

Recently, at Home and abroad, Internet of Things era things(Thing) is participating as a subject of communication in human communication paradigm of existing (lot/M2M) is in full swing. Automobile, refrigerator, bicycle, until shoes, and communication functions generation of information is installed and has created a fusion of new service IT infrastructure. Its use and application are broadening to various areas and the number of devices used for it is increasing to increase the number of information transmitted for each object. When the traffic reaches its limit while each set of data is transmitted from the devices divided into each group through the mobile network, M2M communications service might not be processed smoothly. This study used the Knapsack Problem algorithm to create a virtual simulator for a smooth M2M service when the mobile network used for the M2M communications reaches its limit. The virtual simulator applies smooth processing of services from the M2M communications that should be processed first to other subsequent services when data comes to each group of devices. As the M2M technology develops to make many objects more compact in size, it would help with smoother processing of M2M services for the mobile network with fast-increasing traffic.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.481-484
• /
• 2013

Many people today are interested in Machine to Machine (M2M) as the new-generation growth engine of mobile communications service providers in Korea. Its use and application are broadening to various areas and the number of devices used for it is increasing to increase the number of information transmitted for each object. When the traffic reaches its limit while each set of data is transmitted from the devices divided into each group through the mobile network, M2M communications service might not be processed smoothly. This study used the Knapsack Problem algorithm to create a virtual simulator for a smooth M2M service when the mobile network used for the M2M communications reaches its limit. The virtual simulator applies smooth processing of services from the M2M communications that should be processed first to other subsequent services when data comes to each group of devices. As the M2M technology develops to make many objects more compact in size, it would help with smoother processing of M2M services for the mobile network with fast-increasing traffic.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2003

To determine the optimum N rate m Jeju island for utricle and root production of Achyranthes japonica Nakai, a medicinal plant, the plants were grown at two plant densities $(50\;and\;100\;hills/m^2$, two plants per hill; mall plots) at six N application rates (0, 6, 12, 18, 24, and 30 kg/10a; split plots) in 2001. There was no significant interaction between plant density and N application rate for all measured agronomic characters. Main root length and roots per hill were 5 and 52% greater, respectively, but N content of stover was lower under lower plant density compared to higher plant density. The other characters were not affected by plant density. N application rate did not significantly affect mall stem diameter, spikes per hill, spike length, utricles per spike, mall root length and diameter, and utricle N content. As N rate increased from 0 to 30 kg/10a, SPAD values and stover N content increased linearly from 35.0 to 40.5 and 1.09 to 1.38%, respectively, and plant height, branches per hill, stover, utricle and root dry matter yields, roots per hill, and top N yield increased quadratically. Spikes per hill were increased in a cubic manner with increased N application rates. N application rate for the maximum dry matter yield of utricle and root in A. japonica was estimated to be 21 kg N/10a.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.2
• /
• pp.13-19
• /
• 2010

Due to the rapid spread of mobile handheld devices, industrial demands for micro-scale holes with a diameter of even smaller than $10{\mu}m$ in sapphire/silicon wafers have been increasing. Holes in sapphire wafers are for heat dissipation from LEDs; and those in silicon wafers for interlayer communication in three-dimensional integrated circuit (IC). We have developed a sapphire wafer driller equipped with a 532nm laser in which a cooling chuck is employed to minimize local heat accumulation in wafer. Through the optimization of process parameters (pulse energy, repetition rate, number of pulses), quality holes with a diameter of $30{\mu}m$ and a depth of $100{\mu}m$ can be drilled at a rate of 30holes/sec. We also have developed a silicon wafer driller equipped with a 355nm laser. It is able to drill quality through-holes of $15{\mu}m$ in diameter and $150{\mu}m$ in depth at a rate of 100holes/sec.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.11
• /
• pp.1569-1576
• /
• 2013

In mice, supplementation of t10,c12 conjugated linoleic acid (CLA) increases liver mass and hepatic steatosis via increasing uptake of fatty acids released from adipose tissues. However, the effects of t10,c12 CLA on hepatic lipid synthesis and the associated mechanisms are largely unknown. Thus, we tested the hypothesis that gut microbiota-producing t10,c12 CLA would induce de novo lipogenesis and triglyceride (TG) synthesis in HepG2 cells, promoting lipid accumulation. It was found that treatment with t10,c12 CLA ($100{\mu}M$) for 72 h increased neutral lipid accumulation via enhanced incorporation of acetate, palmitate, oleate, and 2-deoxyglucose into TG. Furthermore, treatment with t10,c12 CLA led to increased mRNA expression and protein levels of lipogenic genes including SREBP1, ACC1, FASN, ELOVL6, GPAT1, and DGAT1, presenting potential mechanisms by which CLA may increase lipid deposition. Most strikingly, t10,c12 CLA treatment for 3 h increased phosphorylation of mTOR, S6K, and S6. Taken together, gut microbiota-producing t10,c12 CLA activates hepatic de novo lipogenesis and TG synthesis through activation of the mTOR/SREBP1 pathway, with consequent lipid accumulation in HepG2 cells.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1943-1949
• /
• 2017

In recent years, the maker culture has realized the concept of 'making' itself through the latest technology of high technology. It is rapidly spreading as a maker's movement by sharing the production methods and information of individuals through the Internet. Countries that are leading the makers' movement expect the maker's movement to be the driving force for new value creation and economic growth from the point of view of things and the Internet. We are developing various types of open IoT platforms that can register various Internet devices and services manufactured and developed through DIY and realize interoperable services. Typical open IoT platforms require specialized API analysis capabilities and difficult access to general users due to difficult platform registration conditions and procedures. In this paper, we try to construct an open IoT platform that can be operated as a real service by creating a simple Internet application device and service application from a general manufacturer's point of view.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.156-156
• /
• 2000

The piezoelectric properties and the doping effect for $0.95Pb(Zr_xTi_{l-x})O_3+0.O5Pb(Mn_{1/3}Nb_{2/3})O_3$compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the value of $k_p$ and ${\varepsilon}_{33}^T$ were maximized, but $Q_m$ was minimized $(k_p=0.57, Q_m=1550)$ in the composition of x=0.51. In order to increase the values of $Q_m$, $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of $k_p$ decreased, and the values of $Q_m$ increased with doping concentration of $Nb_2O_5$ . As a experiment results under high electric field driving, when vibration velocity was ower than 0.6[m/s], the temperature increase was 20[℃], and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2011

This research is to suggest effective kitchen furniture design for 40, 50 pyeong-size apartment considering the quantity and volume, heights or length of stored items for cooking. The research candidates are purposive-sampled 30 households in Kangnam, Seoul. The observation shows that the volume of kitchen furniture is $3.1{\sim}5.9m^3$ and of utility furniture is $0.3{\sim}3.8m^3$. For each households hold average of 886 kitchenwares, $4.1m^3$. Such were normally stored in the upper and lower storage and tall storage closet for a kitchen. Through the field studies and depth interviews, it is shown that there are 287 (33.2%), $1.67m^3$ of the application for preparing food, certain knives, disposable products and food which is considered absolutely or comparatively hard to organize. Products that are very hard to organize are the small application for cooking, grouped kitchenware such as openers, the applications with long rod shape food, and detergent. There are 96 of such products, taking the volume of $0.32m^3$; thus, such products are considered to improve the kitchen furniture design. And the shelf of storage can the control 3cm hights according to result of this research.