• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.279-282
• /
• 2006

[ $Pb(Zr_{0.4}Ti_{0.6}O_{3}\;and\;Pb(Zr_{0.6}Ti_{0.4})O_{3}$ ] paste were made and alternately screen-printed on the $Al_{2}O_{3}$ substrates. We have introduced a press-treatment to obtain a good densification of screen printed films. The porosity of the thick films was decreased with increasing the applied pressure and the thick films pressed at 60 MPa showed the dense microstructure and thickness of about $76\;{\mu}m$. The remanent polarization and coercive field increased with increasing applied pressure and the values for the PZT thick films pressed at 60 MPa were $17.04{\mu}C/cm^{2}$ and 78.09 kV/cm, respectively.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.921-925
• /
• 2000

Characteristics of Pb(Mg, Nb)O$_3$-Pb(Zr, Ti)O$_3$system thick films fabricated by a screen printing method were investigated. The buffer layer were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited Pt as a electrode by sputtering on Ag-Pb layer. The printed thick films were burned out at 650$\^{C}$ and sintered at 950$\^{C}$ in O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20㎛ and Ag-Pb layer acted as a diffusion barrier above 3㎛ thickness. The PMN-PZT thick films were screen printed on Pt/Ag-Pb(6m) and sintered by 2nd step (650$\^{C}$/20min and 950$\^{C}$/1h) using paste mixed PMN-PZT and binder in the ratio of 70:30, and the remnant polarization of thick film was 9.1$\mu$C/㎠ in this conditions.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.215-220
• /
• 2014

Electrodeposition behaviors of Pd-Ni alloys were investigated from the polarization curves in a solution containing ethylenediamine as complexing agent. The microstructure and hardness of electrodeposited Pd-Ni alloys were also characterized. Codeposition of Pd-Ni alloys was successfully performed in the wide current density ranging from 2 to $5000A{\cdot}m^{-2}$ because the deposition potential of Pd became close to that of Ni in the ethylenediamine-contained solution. It was also found from X-ray diffraction patterns that the solid solution between Pd and Ni was formed with variation of the composition of alloys. The measured hardness of Pd-Ni alloys increased with increasing the contents of Ni due to solid solution strengthening and grain refinement. The electrodeposited Pd-Ni alloys also exhibited a crack free smooth surface morphology from the SEM observation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.656-658
• /
• 2004

Pb$(Zr_{0.8}Ti_{0.2})TiO_3$ powder were prepared by the sol-gel method using a solution of Pb-acetate, Zr n-propoxide and Ti iso-propoxide. PZT thick film were fabricated by the screen printing method, and the structural and ferroelectric properties asafunting of the sintering temperature were studied. PZT film thickness, obtained by four screen printing, was approximately $70\sim90{\mu}m$. The relative dielectric constant and the dielectric loss of the PZT thick film sintered at $1050^{\circ}C$t were approximately 676 and 1.4%, respectively. The remanent polarization and the coercive field of the PZT thick film sintered at $1050^{\circ}C$ were $21.15{\mu}C/cm^2$ and 10.1 kV/cm, mapetively

• 한국세라믹학회지
• /
• 제38권5호
• /
• pp.466-473
• /
• 2001

Ni-YSZ 음극의 미세구조와 임피던스특성에 미치는 YSZ 입자크기 및 소결온도의 영향을 고찰하였다. 0.3~0.6$\mu\textrm{m}$의 미세한 NiO 분말을 사용할 경우에는 NiO 분말과 크기가 비슷한 미세한 YSZ 분말(TZ8Y, 0.3$\mu\textrm{m}$)을 첨가했을 때 NiO의 입성장을 억제하는 효과가 가장 크고 환원후 Ni의 입자크기를 미세하게 유지할 수 있는 미세구조를 형성하였다. 또한 미세한 YSZ 분말 (TZ8Y, 0.3$\mu\textrm{m}$)과 조대한 YSZ 분말(FYT13.0, 2$\mu\textrm{m}$)의 혼합비를 달리하여 후막을 제조하였을 때에 TZ8Y 분말만 첨가한 조성이 가장 낮은 분극 저항을 나타내었다. 한편 소결온도는 삼상계면의 양과 분극저항에 영향을 주었으며, 140$0^{\circ}C$에서 소결한 시편의 분극저항이 가장 낮은 값을 나타내었다.

• 한국표면공학회지
• /
• 제25권2호
• /
• pp.82-89
• /
• 1992

The effect of interlayer coating of Ni and Ti on corrosion behavior was studied in TiN ion plated steel plate. Interlayer coating was carried out in a single and bi-layer to a various thickness combination prior to final TiN coating of $2\mu\textrm{m}$. Corrosion behavior was evaluated by anodic polarization test in 1N H2SO4 as well as salt spray test. Porosity of each coating was also tested by using SO2 test. Corrosion resistance was improved with increasing the thickness of Ni interlayer coating and Ni-Ti interlayer coating markedly enhanced the corrosion resistance. Ni/Ti interlayer coating of $2\mu\textrm{m}$/2$\mu\textrm{m}$ prior to $2\mu\textrm{m}$ TiN coating decreased the corrosion current density of active range by an order of 4 and that of passive range by an order of 1. This improvement was associated with the retardation of corrosive agent penetration with increasing coating thickness and inherent corrosion resistance of Ni and Ti interlayers, Ni/Ti interlayers coating were also very effective in improvement of corrosion resistance under salt atmosphere.

• 한국전기전자재료학회논문지
• /
• 제11권2호
• /
• pp.128-132
• /
• 1998

2/65/35 PLZT stock solution prepared by Sol-Gel processing was spin-coated on ITO coated glass and annealed by RTA(Rapid Thermal Annealing). The crystal structure of films was reported based on the observation of crystallization process and microstructure of the film fabricated at different fabrication condition. Films were crystallized into rhombohedral structure by annealing at $750^{\circ}C$ for 5 min. As the annealing temperature increased, the size of rosette structure of the films was grown up from $2.4{\mu}m$ to $15{\mu}m$, dielectric constant was increased, coercive field was decreased 33.82 kV/cm, remnant polarization was increased to 39.84 ${\mu}C/cm^2$ and Optical transmittance was decreased.

• 한국광학회지
• /
• 제2권3호
• /
• pp.133-138
• /
• 1991

Eosin을 첨가한 boric acid 유리질 포화흡수체의 포화세기는 비교적 낮은 것으로(약 700 mW/$\textrm{cm}^2$) 측정되었고, 세기가 낮은 경우에서도 축퇴4광파혼합에 의해 광학적 위상공액파를 발생시킬 수 있었다. 파장이 488nm인 Ar-ion laser를 사용하여 이 매질에서 DFWM에 의한 위상공액파의 편광특성을 보였고, 위상공액 반사율의 빛의 세기와 파장에 대한 의존성을 측정하였다. 이 매질에서 비축퇴2광파혼합에 의한 에너지 교환은 두 광속의 주파수차가 약 100 Hz 정도인 경우에 최대가 되었다.

• Biomolecules & Therapeutics
• /
• 제29권6호
• /
• pp.678-684
• /
• 2021

Luteolin, a flavonoid present in several fruits, vegetables, nuts, and herbs reportedly exhibits anti-cancer and anti-inflammatory properties. However, the effect of luteolin on endometriosis, a painful condition characterized by the ectopic growth of endometrial tissue and pelvic inflammation, remains elusive. Herein, we observed that luteolin inhibited cell growth and induced apoptosis of 12Z human endometriotic cells by activating caspase-3, -8, and -9. Additionally, luteolin significantly inhibited the expression of key chemokines, C-C motif chemokine ligand 2 (CCL2) and CCL5, required for monocyte/macrophage influx at endometriotic sites. In macrophages stimulated by endometriotic cells, luteolin treatment suppressed the intracellular expression of M2 markers and endometriosis-promoting factors. Collectively, our data suggest that luteolin exerts anti-endometriotic effects by stimulating endometriotic cell apoptosis and hindering the alternative activation of macrophages.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.21-27
• /
• 1998

E-beam 장비로 ZnS:Mn/Zns:Tb 2층 구조의 TFEL 소자를 제작하여 전기, 광학적 특성을 조사하였다. ITO 투명전극과 ATO 절연체가 증착된 유리기판(corning 7059 glass) 위에 E-beam 장비를 이용하여 ZnS:Mn, ZnS:Tb 형광체를 각각 3000 A로 증착하여 총 두께 6000 Å 갖도록 제작하였다. ZnS:Mn/ZnS:Tb TFEL 소자의 스펙트럼은 Mn/sup 2+/ 이온과 Tb/sup 3+/ 이온의 고유한 발광 스펙트럼을 모두 포함하여 540㎚에서 640㎚에 이르는 매우 넓은 범위의 발광 스펙트럼을 나타내었다. 휘도는 인가전압의 크기가 112V에서부터 급격히 증가하여 155 V에서 포화 휘도 1025 Cd/㎡를 나타내었고 최대 전압 185 V에서의 휘도는 2080 Cd/㎡이었다. Capacitance-voltage(C-V) 및 transferred charge-phosphor voltage(Q/sub t/-V/sub p/) 특성으로부터 형광층 capacitance (C/sub p/)와 절연층 capacitance (C/sub i/)가 각각 13.5 nF/㎠, 60 nF/㎠됨을 알 수 있었고, 인가전압의 최대치를 155 V에서 185 V로 증가시킬수록 TFEL 소자의 문턱전압(V/sub thl/)이 126 V에서 93 V로 감소함을 알 수 있었다. 이것은 인가전압을 증가시킬수록 polarization charge가 증가되고 polarization charge에 의해 형성된 형광체 내부전압이 증가되었기에 문턱전압이 감소한 것이다. 또한 처음으로 문턱전압에 관한 수식을 제안하였으며 문턱전압의 이론치와 실험치가 일치하는 것을 확인하였다.