• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.149-152
• /
• 2002

This study is performed to evaluate the properties of ECO-permeable polymer concrete with blast furnace slag powder and stone dust. The unit weight is in the range of $1,821kg/m^3{\sim}1,955kg/m^3$, the unit weights of those concrete are decreased $15%{\sim}20.8%$ than that of the normal cement concrete. The highest strength is achieved by ECO-permeable polymer concrete filled blast furnace slag powder 50% and stone dust 50%, it is increased 36% by compressive strength, 119% by tensile strength and 217% by bending strength than that of the normal cement concrete, respectively. The coefficient of permeability is in the range of $5.6{\times}10^{-2}cm/s{\sim}8.1{\times}10^{-2}cm/s$, and it is largely dependent upon the mix design.

• Applied Biological Chemistry
• /
• v.24 no.2
• /
• pp.149-152
• /
• 1981

The immobilization of Lactobacillus bulgaricus was investigated by various method, e.g. by use of polyacrylamide gel and Al-, Ca-, Fe- or Mg-alginate beads, and the most active immobilized cells were obtained by entrapment in a Ca-alginate beads. These immobilized microbial cells, when introduced into 4.5% lactose solution and whey solution showed maximum relative activity of 28% or lactose solution and 18% for whey solution as measured against the native microbial reference standard (100).

• Journal of Integrative Natural Science
• /
• v.3 no.3
• /
• pp.148-152
• /
• 2010

Photoluminescence properties and surface morphologies of porous silicon etched with various applied current densities at fixed etching times. FE-SEM image of porous silicon surface indicated that the porous silicon prepared at currents below 200 mA exhibited very bright red photoluminescence properties. As the applied current densities increased, the photoluminescence efficiencies of porous silicon prepared at applied current densities above 300 mA decreased, and displayed the cracked surface on porous silicon. This cracked surface start to collapsed to give cracked domains.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.3
• /
• pp.145-152
• /
• 2001

Low Rayleigh number thermal convection in a fluid layer confined between two-infinite horizontal walls kept at spatially sinusoidal temperature distributions, T_L=T_m+\Delta T\sin \kappax,\;T_U=T_m+\Delta T\sin(\kappax-\beta)$, is theoretically investigated by a regular perturbation expansion method. For small wave numbers, an upright cell is formed between the two walls at $\beta$=0. The cell is tilted, as the phase difference increases, and a flow with tow counter-rotating eddies occurs at $\beta=\pi$. when the wave number is large, isolated eddies are formed near the lower and upper walls, for all the phase differences. There exists a wave number at which maximum heat transfer rate at the walls occurs, at each of the phase differences. And the wave number increases with increase of the phase difference. for a fixed wave number, the heat transfer rate decrease with increase of the phase difference.

• Journal of The Korean Astronomical Society
• /
• v.26 no.2
• /
• pp.141-152
• /
• 1993

The sample of sub dwarfs are selected from LHS catalogue on the bases of the reduced proper motion diagram utilizing Chui criteria, and confirmed with the available photometric and/or kinematic data. Among them, 20 sub dwarfs have trigonometric parallaxes with accuracy better than $20\%$. The color­absolute magnitude relation is derived with them. By adopting this color-magnitude relation and $V/V_m$ method, we have derived the sub dwarf luminosity function over the absolute magnitude range of $M_v$= 4.5 and 9.5. This halo luminosity function is consistent with that of Eggen(1987). By adopting the available mass-luminosity relations for halo stars, we have found that the halo IMF is steeper than disk IMFs of Scalo(1986) and Salpter(1955) in this small mass region.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.139-152
• /
• 1998

본 연구에서는 3차원그래픽스를 이용하여 영상검지기에서의 교통정보를 얻기 위한 검지영역 설정시 안정된 검지영역을 찾기 위한 시뮬레이터를 개발하였다. 기존의 영상검지기에서는 사용자가 임의로 검지영역을 설정하여 교통정보를 수집함으로 인하여 안정된 교통정보를 얻기가 어려웠으며, 영상카메라의 설치시 과다한 설치규격의 설정으로 비효율적 측면이 발생될 수 있다. 이러한 단점을 보완하기 위해서는 영상검지기를 현장에 설치하기 전에 영상검지기 설치를 위한 사전 모의실험을 토대로 최적의 안정된 설치위치 결정이 매우 중요하다. 본 연구에서 개발한 모의 실험기는 도로의 기하구조와 차량을 모델화 하고 이를 3차원으로 좌표화하여 좌표변환식과 원근변환식을 이용하여 3차원좌표를 2차원으로 변환시키고 컴퓨터 모니터에 투영하여 대상 설치위치에서의 결과를 가시화하였다. 본 연구는 개발된 모의실험기의 적용성 검토를 위하여 현재 영상검지기를 운영중에 있는 한 접근로를 대상으로 사례연구를 수행하였다. 수행결과 교통량과 통행속도계측시 최적검지영역 설정을 위한 영상검지기의 설치규격은 높이가 각각 7m, 12m이상이며, 수직각은 각각 $30^{\circ}$, $80^{\circ}$인 것으로 나타났다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.152-155
• /
• 2005

A method of three-dimensional curved surface generation was studied for multi-point dieless forming (MPDF) in the shipbuilding industry. Three-dimensional coordinates of punch elements were obtained from objective surfaces using a proprietary CAD program. MPDF surfaces were generated by adjusting the height of punch elements in accordance with the coordinates. Some problems, such as collision of punch elements and contact between plates and punch bodies, were anticipated from the analysis of the results. A twisted surface was formed successfully by MPDF in a laboratory scale, which suggests possibility of application of the technology to the shipbuilding industry.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.04a
• /
• pp.145-152
• /
• 2000

일반적으로 제품을 개발하는 과정은 구상단계(Concept/Planning Phase), 설계 및 개발단계 (Design/Development Phase), 생산단계(Production/Manufacturing Phase)로 나누어 볼 수 있는데, 제품의 신뢰성은 거의 70∼80%가 구상단계와 설계 및 개발단계에서 결정된다. 그러므로 높은 신뢰성을 갖는 제품을 개발하기 위해서는 구상단계와 설계 및 개발단계에서부터 신뢰성을 고려하여야 한다. 본 논문에서는 D전자(주)에서 산업기술시험원과 함께 구상단계와 설계 및 개발단계에서부터 신뢰성을 고려하여 개발한 LTCC-M(Low Temperature Co-fired Ceramic on Metal) 모듈의 신뢰성설계 사례를 기술하였다. 개발과정에 있어서 신뢰성설계 절차를 제시하고, 각 단계에 있어서 수행한 분석 및 평가 내용을 구체적으로 기술하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.152-153
• /
• 2003

최근 양자점 (Quantum Dot-QD)에 대한 관심이 기초 물리학뿐만 아니라 광전소자 응용 측면에서 많은 주목을 끌고 있다. 특히, 자발 형성방법으로 성장시킨 양자점 (Self-assembled QD)을 이용하여 Laser Diode와 같은 광소자에 응용한 결과가 발표되고 있다. 이러한 자발형성 방법으로 성장한 양자점을 광통신에 응용하기 위해서는 발광파장을 제어할 필요성이 있다. 따라서 본 연구에서는 단거리 광통신에 응용 될 수 있는 1.3 $\mu$m 영역과 장거리 광통신에 사용하는 1.55 $\mu$m 영역으로 InAs 양자점의 발광 파장을 변조한 결과에 대하여 분석하였다. (중략)

• Journal of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.197-202
• /
• 1963

The ${\alpha}-and\;{\beta}$-isomer of 4-nitroazoxybenzenes have been separated by liquid chromatography and their U.V. spectra were examined. The n${\to}{\pi}^{\ast}$ transition band of the compounds did not appear, likewise the cases of other compounds of the series. Transition band of the new isomer were as usual as those of other azoxy-compounds, whereas the ${\pi}{\to}{\pi}^{\ast}$ transition band of the other isomer which is reported in the literature shown peculier hypochromic shift and hypochromic effect. From the spectroscopic point of view it is very likely that the new isomer (m.p. $184-5^{\circ}C$) is ${\alpha}$-isomer and the other one (m.p. $152^{circ}C$) is ${\beta}$-isomer contrary to the literature.