• Journal of the Korea Convergence Society
• /
• v.4 no.1
• /
• pp.27-31
• /
• 2013

The fast-paced development in the field of wireless charger based on M2M, which is available anytime and anywhere, is being underway in accordance with the development of IT technology. Wireless charger technology in M2M has various security threats because it is based on wireless network. The purpose of this paper is to examine the threats of authentication and payment attacks based on wireless network attacks, and to propose the response technique that fit the situation of the wireless charger service by modifying the existing detecting authentication and payment through wireless charger.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.298-310
• /
• 1998

This research was carried out to find out spray characteristics of 3 types of spray nozzle to be used for greenhouse cooling. Following results were obtained from this experimental study. Water amounts sprayed with each nozzle were increased with the spraying pressure. However the increment of sprayed amount with the increase of spraying pressure were not consistent regardless of nozzle types. For the whole tested spraying pressures of nozzle-type I, II, III, the minimum droplet sizes were about 1.7~2.5$\mu$m, 1.7~2.2$\mu$m and 1.7~2.2$\mu$m, respectively, and the maximum droplet sizes were about 44~60$\mu$m, 52~71$\mu$m and 45~61$\mu$m, respectively, and the average droplet sizes were about 23~38$\mu$m, 19~24$\mu$m and 17~25$\mu$m, respectively The most appropriate spraying pressures of nozzle-type I, II, III were analyzed to be 70kgf/$\textrm{cm}^2$, 30kgf/$\textrm{cm}^2$ and 30kgf/$\textrm{cm}^2$, respectively, and their sprayed amounts were about 124mL/min, 103mL/min and 84mL/min, respectively, and average droplet sizes were 22.6$\mu$m, 21.8$\mu$m and 20.6$\mu$m, respectively. Also, with the order of nozzle-type I, II, III, droplet size distributions less than 30$\mu$m were 95.4%, 85.7% and 79.0%, respectively, and the distributions larger than 40$\mu$m were 0.2%, 1.28% and 1.67%, respectively. However most all of the droplet size were less than 50$\mu$m.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.770-777
• /
• 2004

Three pilot-scale membrane systems were operated using lake water as influent in this study. Microfiltration (MF) membrane with pore size of 0.01 m was used in Systen I of which filtration mode was set at constant pressure of $1kgf/cm^2$. Ultrafiltration (UF) membranes with molecular cutoff (MWCO) of 80,000 and 13,000 were used in System II-1 and II-2, respectively. Constant flow mode was applied at the range between 0.7 and $1.5m^3/m^2{\cdot}d$ (average of $1.1m^3/m^2${\cdot}d) for System II-1 and between 0.37 and $1.65m^3/m^2{\cdot}d$ (average of $1.18m^3/m^2{\cdot}d$) for System II-2. In System I, the flux changed from $1m^3/m^2{\cdot}d$ to $0.2m^3/m^2{\cdot}d$ during the operation time of 5 months. System II showed recovery of 94% under the allowable maximum pressure of $3kgf/cm^2$ during the same operation period. From these results, the efficient operation was observed in constant flow mode with respect to filtration time and recovery. Average filtrate turbidity showed 0.0071 NTU in System I and 0.0054 NTU in System II, which implied that high turbidity removal was obtained in both MF and UF systems with no significant difference between MF and UF. From the fact that membrane flux depends largely on membrane type and operation mode, a guideline of optimum design and operation should be suggested for application of membrane systems to full scale water treatment.

• Journal of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.221-228
• /
• 1969

The nucleophilic addition rate constants of n-amyl-, n-hexyl-, n-octyl-and n-decyl mercaptide ion to 3,4-methylenedioxy-${\beta}$-nitrostyrene were determined and found to be 2.82 ${\times}10^8$ $M^{-2} .sec^{-1}$, 1.00 ${\times}10^8$ $M^{-2}.sec^{-1}$, 2.23 ${\times}10^8$ $M^{-2} .sec^{-1}$ and 1.77 ${\times}10^8$ $M^{-2}.sec^{-1}$ respectively. At low pH, for n-amyl-, n-hexyl-, n-octyl-and n-decyl mercaptan the values determined are 2.82 ${\times}10^{-2}$ $M^{-1} . sec^{-1}$, 1.95 ${\times}10^{-2}$ $M^{-1} . sec^{-1}$, 7.08 ${\times}10^{-2}$ $M^{-1} . sec^{-1}$ and 5.63 ${\times}10^{-2}$ $M^{-1} . sec^{-1}$ respectively. The rate equations which can fully explain the addition mechanism over wide pH range were also be obtained.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.16-20
• /
• 2004

To electropolymerize Polypyrrole(ppy) film modified with fullerene $ions(full^-)$ the cell, Au/5 mM pyrrole, 1mM fullerene, 0.1M $TBABF_4,\;CH_2Cl_2/Pt$, was employed to Prepare the wafer-like type of $electrode/ppy(full^-)ppy(full^-){\ldots}$ electrodes. They were applied to deposit alkali metal ions with the cell of Au(quartz crystal analyzer; QCA)/ppy$(full^-)$, 0.01M metal ion(aq.)/Pt. The depositing rate constant of each ion for $Li^+,\;Na^+,\;K^+,\;Rb^+\;and\;Cs^+$, determined from the first order equation was $1.60\times10^{-8},\;3.13\times10^{-11},\;1.38\times10^{-9},\;2.71\times10^{-11}\;and\;2.98\times10^{-12}mo1.s^{-1}$ respectively. The calculated stoichiometry of the ions determined by quartz crystal microbalance(QCM) at the electrodes was $Li_7C_{60},\;Na_4C_{60},\;K_3C_{60},\;Rb_1C_{60}\;and\;Cs_1C_{60}$ respectively.

• The Korean Journal of Ecology
• /
• v.9 no.4
• /
• pp.185-192
• /
• 1986

The production and decomposition rate of litters from the three different locations, Quercus acutissium forest at 630 m, Q. mongolica forests at 1, 005m and 1, 490 m of Mt. Dokyoo, were estimated by Olson model. The contents of N, P, K, Ca and Na in soils were measured and the relationships among them were elucidated. The amounts of litter production in Q. mangolica were the lowest, 378.96g/$m^2$ at 1, 490 m and the highest, 876.12g/$m^2$ at 1, 005 m. And the amounts of litter production in Q. acutissima at 630 m was 686.16 g/$m^2$. The decay rate of litters in Q. mongolica was the smallest, 0.123 at 1, 490 m, and the largest, 0.222 at 1, 005 m. And that in Q. acutissima was 0.169 at 630 m which was the medium rate. The production and decay rate of litters decreased with the ascending altitude. The values at 630 m were maller than those at 1, 005 m. This might be due to the fact that the tree species at 630 m was Q. acutissima was 0.169 at 630 m which was the medium rate. The production and decay rate of litters decreased with the ascending altitude. The values at 630 m was Q. acutissima which was different from Q. mongolica at 1, 005 m and 1, 490 m. The half-0life of litter decay in Q. monglica was 5, 634 years at 1, 490 m and 3.134 years at 1, 005 m. And that in Q. acutissima was 4.132 years at 630 m. The decay rates of litters were tend to be inversely proportional to the ascending altitude. The annual standing stocks of mineral and their amounts returned to the soil were proportional to the decay rate of organic matters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.371-374
• /
• 2000

The electrochemical properties of LiM $n_2$ $O_4$as a cathode and an anode for the lithium secondary battery were evaluated. When LiM $n_2$ $O_4$ material was used as the cathode with the current collector of aluminum, the 1st specific capacity and the 1st Ah efficiency in LiM $n_2$ $O_4$/lithium cell were 123 mAh/g and 91.7%, respectively The anodic properties of LiM $n_2$ $O_4$ material was also evaluated in the LiM $n_2$ $O_4$/1ithium cell with the current collector of copper. It showed that the LiM $n_2$ $O_4$ was useful as the anode for the lithium secondary battery. During the 1st discharge, a potential plateau was observed at the potential of 0.3 $V_{Li}$ Li+/. The 1st specific charge capacity and the 1st specific discharge capacity were 790 mAh/s and 362 mAh/g, respectively. Therefore, the 1st Ah efficiency was 46%. The discharge capacity was gradually faded with the charge-discharge cycling to about 50th cycles. Thereafter, the discharge capacity was stabilized to about 110 mAh/g.

• Fire Science and Engineering
• /
• v.32 no.5
• /
• pp.6-14
• /
• 2018

This study was carried out with respect to the heat release rate (HRR) properties of building wood. Heat release characteristics were measured using a cone calorimeter (ISO 5660-1) with four kinds of wood. The time to ignition measured after the combustion in $25kW/m^2$ external heat flux was 35 to 55 s. Time to ignition of both lauan and red pine was marked with the most delayed value in each of 54 s, 55 s. The maximum heat release rate ($HRR_{peak}$) was $156.87{\sim}235.1kW/m^2$, and the risk of early fire was highest in spruce. Total heat release of red pine was obtained in the highest value with $114.2MJ/m^2$. The mean effective heat of combustion of Japanese cedar was 19.1 MJ/kg and the highest among the samples. Fire risk of wood by FPI was orderly increased from lauan ($0.2468s{\cdot}m^2/kW$), red pine ($0.2339s{\cdot}m^2/kW$), spruce ($0.2308s{\cdot}m^2/kW$) to Japanese cedar ($0.2231s{\cdot}m^2/kW$). Fire risk of wood by FGI get increased from lauan ($0.5088kW/m^2{\cdot}s$), red pine ($0.5111kW/m^2{\cdot}s$), Japanese cedar ($2.8522kW/m^2{\cdot}s$) to spruce ($3.0662kW/m^2{\cdot}s$). Therefore, the risk of fire on the heat release characteristics of woods were found that spruce and Japanese cedar showed the high value compared with the other specimens.

• Journal of Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.49-53
• /
• 2000

The in vitro metabolism of a new herbicide pyribenzoxim, {benzophenone O-[2,6-bis[(4,6-dimethoxy-2-pyrimidinyl)oxy]benzoyl]oxime} was studied using rice, barnyardgrass and rat liver microsomes. No metabolism of pyribenzoxim was observed with rice and barnyardgrass microsomes though the cvtochrome P450 was active, which was evidenced by the metabolism of cinnamic acid. With rat liver microsomes, four metabolites (M1, M2, M3, and M4) were produced while parent compound decreased. M1 and M2 were from the hydrolysis reactions and NADPH-dependent metabolites were M3 and M4 (major metabolite) which were hydroxylated by cytochrome P450. They were identified as bispyribac-sodium (M1), benzophenone oxime (M2), {benzophenone O-[2,6-bis[(5-hydroxy-4,6-dimethoxy-2-pyrimidinyl)oxy]-benzoyl]oxime}(M3), and {benzophenone O-[2[(5-hydroxy-4,6-dimethoxy-2l-pyrimidinyl)6-(4,.6dimethoxy-2-pyrimidinyl)oxy]benzoyl]oxime} (M4) through LC/MS/MS analyses. Based on the results obtained metabolic map of pyribenzoxim is proposed.

• Microbiology and Biotechnology Letters
• /
• v.36 no.1
• /
• pp.28-33
• /
• 2008

The expression vector (pWHM3-TR1R2) for sprT gene encoding Streptomyces griseus trypsin (SGT) followed by two regulatory genes, sgtR1 and sgtR2, was introduced into Streptomyces lividans TK24 and Streptomyces griseus IFO 13350. Various media with different compositions were used to maximize the productivity of SGT in the recombinant trains. he SGT productivity was best when the transformant of S. lividans TK24 was cultivated in R2YE medium (0.74 unit/mL) at 5 days of cultivation. C5/L (0.66 unit/mL) medium also gave a good productivity, but Livid (0.08 unit/mL) and NDSK (0.06 unit/mL) yielded poor productivities. S. griseus IFO 13350/pWHM3-TR1R2 produced SGT by 1.518 unit/mL (C5/L), 1.284unit/mL (R2YE),0.932 unit/mL (NDSK), and 0.295 unit/mL (Livid) at 7 days of cultivation, which was much higher than those from S. lividans TK24/TR1R2. The SGT protein was purified from the culture broth of S. griseus IFO 13350/pWHM3-TR1R2 in C5/L to homogeneity via ammonium sulfate fractionation, and CM-sepharose and SP-sepharose column chromatographies. The specific activity of purified SGT was 69,252 unit/mg, and the final purification fold and recovery yield were 6.5 and 1.4%, respectively.