• Food Science and Biotechnology
• /
• v.15 no.2
• /
• pp.202-206
• /
• 2006

The oxidation stability of fish oil containing omega-3 polyunsaturated fatty acids (PUFAs), which is very susceptible to oxidative deterioration, needs to be improved before it can be successfully applied to functional foods. The antioxidant activities of 17 species of materials in anchovy oil (AO) were compared and a potent antioxidant was determined to improve the shelf-life of refined AO. Antioxidant activities of the 0.05% (w/w) materials in AO were compared against control during storage at $30^{\circ}C$ for 10 days. While no antioxidant effect was shown in alpha tocopherol against control, 3 species of grapefruit seed extracts (GSEs), astaxanthin (AX), soybean lecithin, and green tea extract showed good antioxidant activities. Especially, GSE B, GSE C, and AX showed significantly high peroxide inhibitory activities (PIAs) of $16.2{\pm}2.1$, $20.{\pm}3.5$, and $17.7{\pm}3.5%$, respectively, after the 4th day (p<0.01). Radical scavenging activities (RSAs) of GSE B, GSE C, and AX were $85.1{\pm}0.8$, $95.3{\pm}0.3$, and $85.9{\pm}0.8%$, respectively. Correlation between PIAs and RSAs was high ($R^2=0.926$) in GSE B, GSE C, and AX. Therefore, we concluded that one of the main antioxidative mechanisms of GSEs and AX must operate through an RSA pathway. The $RC_{50}$ (concentration required for 50% reduction of 1,1-diphenyl-2-picryl-hydrazyl, DPPH) of GSE C was $258\;{\mu}g/mL$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.169-177
• /
• 2000

The purpose of this study was to compare the retention of complete cast crown over amalgam ores, composite resin cores, and cast gold cores when cemented with three different luting agents. Eighteen core specimens each of amalgam(Bestaloy, Dong Myung, Seoul, Korea), composite resin (Z100, 3M Dental product, st. Paul, Minn) and type IV gold alloy (Ba-4, Heesung Engelhard Corp., Korea) were made in a customized milling stainless steel die. A wax pattern with a loop attached to occlusal surface was made for each core and a type II gold alloy casting was fabricated. The castings which had clinically acceptable marginal fit were used as test samples. The following luting cements were used to cement cast crowns on each core material : (1) zinc phosphate cement (Confi-dental Products Co., USA) (2) glass-ionomer cement (Fuji Plus, GC Industrial Corp., Tokyo, Japan) (3) resin cement (Panavia 21, Kuraray Co., USA). All cements were mixed according to manufacturers' instructions. A static load of 5kg was then applied for 10 minutes on the crowns. All specimens were stored in saline solution for 24 hours at $37^{\circ}C$ and thermocycled for 500 cycles. After storage and cycling, the tensile bond strengths were measured by using a universal testing machine (Instron Corp., Canton, Mass.) at a crosshead speed of 0.5mm/min. The results were as follows 1. The retentive strength of resin cement was the highest of alt three types of cement for resin core (p<0.05). 2. There was no statistical difference among the retentive strengths of three cements for amalgam core (p>0.05). 3. The retentive strength of resin cement was higher than that of zinc phosphate for cast core, but there was no difference between the retentive strength of glass ionomer cement and those of rein and zinc phosphate cement. 4. The retentive strength of the zinc phosphate cement for amalgam core was the highest of all type of cores.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.427-432
• /
• 2009

The aim of this study was to compare the shear-peel strength and the fracture site of 5 commercially available orthodontic band cements. One hundred molar bands were cemented to extracted human 3rd molars. The specimens were prepared in accordance with the manufacturer's instructions for each cement. After storage in a humidor at $37^{\circ}C$ for 24 hours, the shear debonding force was assessed for each specimen using an universal testing machine with crosshead speed of 2 mm/minute. Maximal failure stress was converted to mean shear-peel strength, MPa. The predominant site of band failure was recorded visually for all specimens as either at the band/cement or cement/enamel interface. Mean shear-peel strength of Ormco was the highest(2.44${\pm}$0.57), followed by Fuji $Ortho^{TM}$(2.24${\pm}$0.50), $Ketac-Cem^{TM}$(2.10${\pm}$0.57), 3M $Unitek^{TM}$(1.82${\pm}$0.43), $Band-Lok^{TM}$(1.73${\pm}$0.28). There were statistically significant differences between Ormco and $Band-Lok^{TM}$, Ormco and 3M $Unitek^{TM}$, and Fuji $Ortho^{TM}$ and $Band-Lok^{TM}$(p<0.05). The predominant site of bonding failure for bands cemented with the Ormco was at the band/cement interface, whereas bands cemented with Ultra $Band-Lok^{TM}$ failed predominantly at the enamel/cement interface. There was no significant difference among the other cements(Fuji $Ortho^{TM}$, 3M $Unitek^{TM}$, $Ketac-Cem^{TM}$).

• Clinical and Experimental Pediatrics
• /
• v.55 no.3
• /
• pp.88-92
• /
• 2012

Purpose: Mucopolysaccharidosis type II (MPS II or Hunter syndrome) is a rare lysosomal storage disorder caused by iduronate-2-sulfatase (IDS) deficiency. MPS II causes a wide phenotypic spectrum of symptoms ranging from mild to severe. IDS activity, which is measured in leukocyte pellets or fibroblasts, was reported to be related to clinical phenotype by Sukegawa-Hayasaka et al. Measurement of residual plasma IDS activity using a fluorometric assay is simpler than conventional measurements using skin fibroblasts or peripheral blood mononuclear cells. This is the first study to describe the relationship between plasma IDS activity and clinical phenotype of MPS II. Methods: We hypothesized that residual plasma IDS activity is related to clinical phenotype. We classified 43 Hunter syndrome patients as having attenuated or severe disease types based on clinical characteristics, especially intellectual and cognitive status. There were 27 patients with the severe type and 16 with the attenuated type. Plasma IDS activity was measured by a fluorometric enzyme assay using 4-methylumbelliferyl- ${\alpha}$-iduronate 2-sulphate. Results: Plasma IDS activity in patients with the severe type was significantly lower than that in patients with the attenuated type ($p$=0.006). The optimal cut-off value of plasma IDS activity for distinguishing the severe type from the attenuated type was 0.63 $nmol{\cdot}4hr^{-1}{\cdot}mL^{-1}$. This value had 88.2% sensitivity, 65.4% specificity, and an area under receiver-operator characteristics (ROC) curve of 0.768 (ROC curve analysis; $p$=0.003). Conclusion: These results show that the mild phenotype may be related to residual lysosomal enzyme activity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.493-499
• /
• 2011

The objective of this study was to find the way to prolong the storage time of sawdust-based oyster mushroom (Pleurotus osteratus) spent substrate (OMSS) by fermenting with potential probiotic microorganisms to recycle the otherwise waste of mushroom farms. To this purpose, lactic acid bacteria (LAB) were screened to select the best lactic acid-producing strains. Three strains of LAB (Lactobacillus plantarum Lp1', Pediococcus acidilacticii Pa193, L. plantarum Lp2M) were selected and in mixture they lowered the pH of the fermented OMSS to 3.81. fOMSS (fermented sawdust-based oyster mushroom spent substrate) could be stored at room temperature for at least 17 days without any deterioration of feed quality based on the pH, smell, and color. In dry matter disappearance rate in situ, commercial TMR (total mixed ration), OMSS and OMMM (oyster mushroom mycelium mass) showed no significant differences between the samples after 6, 12 and 24 h incubation except for 48 h. Two separate field studies were performed to test the effects of fOMSS supplement on the growth performance of postweaning Holstein calves. Field trials included groups of animals feeding calf starter supplemented with: Control (no supplement), AB (colistin 0.08% and oxyneo 110/110 0.1%), fOMSS (10% fOMSS) and fConc (10% fermented concentrate) and DFM (direct-fed microbials, average $10^9$ cfu for each of three LAB/d/head). Growth performance (average daily gain and feed efficiency) of the fOMSS supplement group was higher than that of AB followed by fConc and DFM even though there was no statistically significant difference. The Control group was lower than any other group. Various hematological values including IgG, IgA, RBC (red blood cell), hemoglobin, and hematocrit were measured every 10 days to check any unusual abnormality for all groups in trial I and II, and they were within a normal and safe range. Our results suggest that sawdust-based OMSS could be recycled after fermentation with three probiotic LAB strains as a feed supplement for post-weaning calves, and fOMSS has the beneficial effects of an alternative to antibiotics for a growth enhancer in dairy calves.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.15-21
• /
• 2012

MTBE (Methyl tertiary-butyl ether) has been commonly used as an octane enhancer to replace tetraethyl lead in gasoline, because MTBE increases the efficiency of combustion and decreases the emission of carbon monoxide. However, MTBE has been found in groundwater from the fuel spills and leaks in the UST (Underground Storage Tank). Fenton's oxidation, an advanced oxidation catalyzed with ferrous iron, is successful in removing MTBE in groundwater. However, Fenton's oxidation requires the continuous addition of dissolved $Fe^{2+}$. Zero-valent iron is available as a source of catalytic ferrous iron of MFO (Modified Fenton's Oxidation) and has been studied for use in PRBs (Permeable Reactive Barriers) as a reactive material. Therefore, this study investigated the condition of optimization in MFO-PRBs using waste zero-valent iron (ZVI) with the waste steel scrap to treat MTBE contaminated groundwater. Batch tests were examined to find optimal molar ratio of MTBE : $H_2O_2$ on extent to degradation of MTBE in groundwater at pH 7 with 10% waste ZVI. As the results, the ratio of optimization of MTBE to hydrogen peroxide for MFO was determined to be 1:300[mM]. The column experiment was conducted to know applicability of MFO-PRBs for MTBE remediation in groundwater. As the results of column test, MTBE was removed 87% of the initial concentration during 120days of operational period. Interestingly, MTBE was degraded not only within waste ZVI column but also within sand column. It means the aquifer may affect continuously the MTBE contaminated groundwater after throughout the waste ZVI barrier. The residual products showed acetone, TBF (Tert-butyl formate) and TBA (Tert-butyl acetate) during this test. The results of the present study showed that the recycled materials can be effectively used for not only a source of catalytic ferrous iron but also a reactive material of the MFO-PRBs to remove MTBE in groundwater.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.351-360
• /
• 2018

This study was conducted to analyze the responses of chlorophyll contents and growth of Pinus densiflora and Quercus variabilis seedlings on distance from the well and $CO_2$ flux after the artificial $CO_2$ release. From June 1 to 30, 2016, $CO_2$ gas was injected at the rate of $6L\;min^{-1}$ at the study site in Eumseong. Chlorophyll content was analyzed in the middle of July, 2016, and root collar diameter (RCD), height (H), and biomass were measured in May and December, 2016 after planting 2-year-old P. densiflora and 1-year-old Q. variabilis seedlings in May, 2015. The chlorophyll content of P. densiflora seedlings did not show a significant correlation with $CO_2$ flux, whereas the chlorophyll content of Q. variabilis seedlings showed a significant negative correlation with increasing $CO_2$ flux (P<0.05). The RCD and H growth rates of both species showed the significant difference in the distance from the well of the $CO_2$ anthropogenic release treatment. In particular, the RCD and H growth rate of P. densiflora seedlings and the RCD growth rate of Q. variabilis seedlings increased significantly as the seedlings were closer to the well, but the H growth rate of Q. variabilis seedlings decreased significantly. In addition, as the $CO_2$ concentration in the ground increases, ${\Delta}R/S$ ratio increases in both species, suggesting that the high $CO_2$ concentration in the soil promotes carbon distribution relative to the root part. The results of this study can be used as data necessary to monitor the $CO_2$ leakage and physiological and growth responses of both species to leakage of stored $CO_2$ in the future.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.612-619
• /
• 2011

Cronobacter sakazakii has been isolated from a wide range of environmental sources and from several foods of animal and plant origin. The objective of this study was to determine the resistance of C. sakazakii (ATCC 12868, ATCC 29004, and ATCC 29544) in cold, cold-freeze thaw, cold-acid, and cold starvation-freeze thaw stress. The number of C. sakazakii decreased to 1 log CFU/mL at $5^{\circ}C$ (cold storage) for 10 days. When C. sakazakii was cultivated at a low temperature ($13^{\circ}C$), the population of C sakazakii ATCC 12868 and 29004 increased to $10^9$ CFU/mL, and the population of C. sakazakii ATCC 29544 increased to $10^8$ CFU/mL. For C. sakazakii ATCC 12868 and 29004, the cold-adapted cells ($5^{\circ}C$ 24 hr) decreased by 4 log CFU/mL, and the low-temperature-cultivated cells ($13^{\circ}C$) decreased by 0.5 log CFU/mL. In this study, low-temperature cultivation enhanced the freeze-thaw cross-resistance due to the metabolic changes in the cells. Cold stress ($5^{\circ}C$ 48 hr, $13^{\circ}C$ cultivation) enhanced the cold-acid cross-resistance. The cold-starved cells in the sterilized 0.1% peptone water enhanced the freeze-thaw cross-resistance with significant differences (p<0.05). Therefore, the increased tolerance of the cold-adapted or low-temperature-cultivated C. sakazakii cells to freeze-thaw, acid, or starvation suggests that such environments should be considered when processing minimally processed foods or foods with extended shelf life.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.21-22
• /
• 2009

최근, 헵타메틴 시아닌색소(heptamethinecyanine)는 그 적용 범위가 넓기 때문에 많은 연구자들의 관심을 받고 있다. 특히, photo-sensitizers, dye lasers, optical recordings와 storage media 등 다양한 분야에 적용이 가능하다. 헵타메틴 시아닌색소의 주된 특징은 polymethine 사슬에 연결된 cyclohexene 고리에 의하여 근적외선 부근에서 흡수가 이뤄진다는 것이다. 근적외선 색소의 흡수 특성을 HOMO와 LUMO 에너지 전위를 사용하여, 수치화 함으로써 분자간, 분자내 상호작용을 분석 할 수 있다. 따라서, 본 실험은 헵타메틴 시아닌 색소의 치환체에 따른 전기화학적 특성을 순환 전압-전류법(Cyclic voltammetry)과 분자 모델링을 통하여 HOMO와 LUMO의 에너지 준위를 구하고, 치환체 효과가 헵타메틴 시아닌색소에 미치는 전기화학적 특성을 UV-Vis와 계산으로부터 얻어진 에너지준위를 분석하고자 한다. 본 실험에 사용된 Uv-Vis 스펙트럼 측정은 Agilent 8453 UV-Vis spectrophotometer를 사용하였고, 전기화학적 분석 방법인 순환 전압-전류법은 Versa STAT 3 (Princeton allied research in USA)를 사용하였다. 순환전압-전류법의 측정은 Acetonitrile 용액에 $TBAPF_6$ (Tetrabutylammonium hexafluorophosphate)를 전해질로 하고, Ag/$Ag^+$을 기준전극으로 사용하여 주사 속도를 50mV/s로 하여 측정 하였다. 치환체에 의한 영향을 알아보기 위하여 분자구조 최적화 모델링을 사용하였다. 3차원 분자입체 특성 및 에너지 준위 상태는 Materials studio 4.2를 사용하여 특성을 예측 하였다. 본 연구에서는, 헵타메틴 시아닌 색소의 기본 골격에 각기 다른 치환체를 치환 시켜 치환체에 의한 영향을 전기화학적인 방법인 순환 전압-전류법(Cyclic voltammetry)와 분자 모델링 방법을 사용하여, HOMO와 LUMO에너지 준위 값을 구함으로써 치환체에 의한 영향을 알아보았다. 치환체로는 Dye 1과 Dye 2로 치환된 헵타메틴 시아닌 색소를 사용하였다. 이렇게 얻어진 HOMO/LUMO 에너지 준위 값으로부터 이온화 에너지($I_p$)와 전자 친화도($E_a$) 또한 구할 수 있는데, $I_p$와 $E_a$는 분자 오비탈과 전자전이에 관련된 값들이고, 이는 계산을 통하여 얻을 수 있다. 순환 전압-전류법의 계산 방법은 봉우리 전위(peak postential)와 (onset potential)방법이 있는데, 이 계산을 통한 전위 값들이 봉우리 전위 계산 방법이 onset potential 방법에 비하여 작은 전위 값으로 나타난다. 하지만 이 두 가지 방법 모두 현재 순환 전압-전류법을 사용하여 HOMO/LUMO 에너지 준위를 측정하는 방법에 쓰이고 있으며, 어떠한 계산 방법이 더 정확하다고는 말 할 수 없지만, 본 실험 결과를 통하여 비교 분석한 결과 onset potential 계산 방법이 봉우리 전위 계산 방법에 비하여 정확하다고 판단된다. Dye 1과 Dye 2를 순환 전압-전류법으로 측정한 결과 각기 다른 전위를 나타내고 이것을 계산을 통하여 정량화하면 Dye 2가 Dye 1에 비하여 높은 전위 값을 갖음을 알 수 있는데, 이것은 ethyl 에 비하여 surful 원자의 전자공여성이 더 크다고 할 수 있다.

• Economic and Environmental Geology
• /
• v.55 no.1
• /
• pp.63-76
• /
• 2022

Dacitic tuffs, 97 to 118 m thick, were recovered from the lower part of the subsurface Seongdongri Formation, Janggi Basin, which was drilled to assess the potential for underground storage of carbon dioxide. The tuffs are divided into four depositional units(Unit 1 to 4) based on internal structures and particle componentry. Unit 1 and Units 3/4 are ignimbrites that accumulated in subaerial and subaqueous settings, respectively, whereas Unit 2 is braided-stream deposits that accumulated during a volcanic quiescence, and no dacitic tuff is observed. A series of analysis shows that mordenite and clinoptilolite mainly fill the vesicles of glass shards, suggesting their formation by replacement and dissolution of volcanic glass and precipitation from interstitial water during burial and diagenesis. Glass-replaced clinoptilolite has higher Si/Al ratios and Na contents than the vesicle-filling clinoptilolite in Units 3. However, the composition of clinoptilolite becomes identical in Unit 4, irrespective of the occurrence and location. This suggests that the Si/Al ratio and pH in the interstitial water increased with time because of the replacement and leaching of volcanic glass, and that the composition of interstitial water was different between the eastern and western parts of the basin during the formation of the clinoptilolite in Units 1 and 3. It is also inferred that the formation of the two zeolite minerals was sequential according to the depositional units, i.e., the clinoptilolite formed after the growth of mordenite. To summarize, during a volcanic quiescence after the deposition of Unit 1, pH was higher in the western part of the basin because of eastward tilting of the basin floor, and the zeolite ceased to grow because of the closure of the pore space as a result of the growth of smectite. On the other hand, clinoptilolite could grow in the eastern part of the basin in an open system affected by groundwater, where braided stream was developed. Afterwards, Units 3 and 4 were submerged under water because of the basin subsidence, and the alkali content of the interstitial water increased gradually, eventually becoming identical in the eastern and western parts of the basin. This study thus shows that volcanic deposits of similar composition can have variable distribution of zeolite mineral depending on the drainage and depositional environment of basins.