• ETRI Journal
• /
• v.28 no.1
• /
• pp.95-98
• /
• 2006

In this letter, a novel M-ary code-selected direct sequence (DS) ultra-wideband (UWB) communication system is presented. Our purpose is to achieve a high data rate by an M-ary code-selected direct sequence bipolar pulse amplitude modulation (MCSDS-BPAM) scheme. In this system, a particular DS code sequence is selected by the $log_2M$/2 bits from the DS gold code set. This scheme can accomplish both a high data rate without increasing the system bandwidth or changing the pulse shape and improve the BER with an increase of modulation level M even at a lower signal-to-noise ratio (SNR). The receiver signal processing algorithm is given for an MCSDS-BPAM UWB system over an ideal AWGN channel and correlation receivers.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.171-178
• /
• 2011

In this paper, a novel pulse repetition interval (PRI) jittering coder based on quasi-random M-sequence codes is proposed for improvement of counter-countermeasure capability in a radar. Each of the proposed jittered 256 PRI codes has a unique code chip combination with 256 code chips, such that any set of three consequent code chips (4 pulses) from any code appears only once among the entire code chip sequences of the codes. This indicates that only 4 of received pulses are enough to determine uniquely the exact timing position of the incoming pulse train (or code chip sequence) required for counter-countermeasure, as well as the identity of the transmitted code. To prove the proposed idea experimentally, the jittered PRI coder is implemented and demonstrated.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.93-101
• /
• 2010

In this paper we generate Gold-sequence by using M-sequence which is made by two primitive polynomial of GF(2). Generally M-sequence is generated by linear feedback shift register code generator. Here we show that this matrix of appropriate permutation has Hadamard matrix property. This matrix proves that Gold-sequence through two M-sequence and additive matrix of one column has one of major properties of Hadamard matrix, orthogonal. and this matrix show another property that multiplication with one matrix and transpose matrix of this matrix have the result of unit matrix. Also M-sequence which is made by linear feedback shift register gets Hadamard matrix property mentioned above by adding matrices of one column and one row. And high-speed conversion is possible through L-matrix and the S-matrix.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.12-22
• /
• 2012

The main drawback of the multi-code spread spectrum communication system, which spreads data bits stream by the multiplexed orthogonal codes, is the need for the highly linear amplifier. Several constant amplitude precoding schemes have been proposed for the Walsh code or the extended $m$-sequence based multi-code spread spectrum systems. In the constant amplitude spread spectrum systems the accompany code is transmitted together with orthogonal codes to maintain the transmitter output in a constant level. In this paper we propose the use of the accompany in the receiver to improve the BER performance. The proposed receiver has the capability to correct the code detection error(up to one code error). We carried out simulations to verify the validity of the proposed algorithm. BER performance improvement was noticed compared with the conventional receiver.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.181-186
• /
• 2008

Wireless data transmission is vulnerable to attackers and hackers. Recently, the fast development of wireless communication systems seamlessly increase the demand for security in this area. Moreover, error correction is especially important because various kinds of interferences among wireless devices. In order to solve two above problems, we propose to apply MCC (M-sequence Convolutional Code) in the system which is able to protect information and correct errors. The proposed system can obtain higher secure property by randomly changing the output connections by the proposed M-sequence. Performance of the system is analyzed according to BER (Bit Error Rate) and secure levels. The simulation results revealed that we can get the coding gain of 0.1 dB over conventional convolution coding technique. The proposed algorithm is installed in physical layer and easily implemented. Another advantage of our proposed (M-sequence and convolutional code) is that it can be applied to CDMA (Code Division Multiple Access) communication system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.5
• /
• pp.22-29
• /
• 2012

By using the cyclic properties of symmetric balance incomplete block design(BIBD) codes and arrayed-waveguide grating(AWG) routers, a compact optical CDMA network coder-decoder(codec) can be constructed. It can be observed that the various code families obtained by BIBD improve the BER performance compared to M-sequence code.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1910-1917
• /
• 1989

This paper shows the performances of asynchronous binary direct-sequence spread-spectrum multiple access communication systems with Rayleigh fading and White Gaussian noise. The performance measures considered are worst-case bit error probability and average SNR depending on code sequences and chip waveforms. The code sequences used are m-sequence and Gold sequence with period 31.The chip waveforms employed are rectangular, sinusoidal and something other chip waveforms.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.1-11
• /
• 2012

The multi-code spread spectrum communication system, which spreads data bit stream by multiplexing orthogonal codes, can transmit data in high rate. However it needs the high-cost good linear amplifier because of the multi-level output signal. In order to overcome this drawback several systems making the amplitude of output signal constant with Walsh codes have been proposed. Recently constant amplitude pre-coded multi-code spread spectrum systems using extended m-sequence have been proposed. In this paper we consider an extended m-sequence based constant amplitude multi-code spread spectrum system with code set partitioning. By grouping the orthogonal codes into 4 subsets, not only is the computational complexity of the transceiver reduced but BER performance also improves. It has been shown that parity checking on four detected codes at the receiver can correct code detection error and result in BER performance enhancement. In this paper we propose a improved parity check receiver. We carried out computer simulation to verify feasibility of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1059-1065
• /
• 2007

In this paper, we propose a class of polyphase signature sequences, whose general odd correlation properties are useful for M-ary phase signaling systems. The maximum magnitude of the general odd correlation functions of the proposed sequences are investigated and compared with those of FZC (Frank-Zadoff-Chu) sequences and those of EOE (equivalent odd and even correlation) sequences. The performance of the asynchronous M-ary phase signaling systems using the proposed sequences is simulated and compared with that using FZC sequences in direct sequence code division multiple access (DS/CDMA) systems. The performance of the system using the proposed sequence is shown to be better than that using FZC sequences when the multipath fading is in existence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.347-356
• /
• 1987

This paper is to propose a new line code suitable for a high speed unipolar pulse transmission system, such as a high speed optical digital transmission system. The original information speed can be converted into the transmission speed $\frac{(m+1)}{m}$ by the speed converter. Then this code, named mBiZ code, is generated by means of an Exclusive NOR between the bit stream inserted a space into every m bits and the bit stream delayed by the time slot allocated a single bit at the output coded sequence. Therefore, a mBiZ code can reduce a redundancy in the line code for transmission and its conversion circuits can be devised easily. The mBiZ code can also suppress undesirable long consecuitive identical digits and make line code balance in the mark and space ratio. Therefore, high frequency and low frequency components in power spectrum of a mBiZ code can be suppessed.