• 한국자기학회지
• /
• 제2권1호
• /
• pp.44-49
• /
• 1992

단롤법 급속응고기술을 이용하여 $Nd_{12}Fe_{80}B_{6}(Nb,\;M)$ (M=Ti/Cu/Ga) 리본을 제작하고 이의 자기특성 및 미세조작에 관한 연구를 하였다. X-선 회절 및 TEM을 이용한 미세조직 조사 결과, 리본의 이방화에 Ga이 효과적이며, 디스크표면속도 17.9 m/s로 제작한 $Nd_{12}Fe_{80}B_{6}(Nb,\;Ca)$ 리본은 약 30 nm의 미세한 결정립으로 구성되고 자유표면이 이방화된 조직으로 형성됨을 알았다. 이 리본을 분쇄하여 자장중에서 정렬시킨 분말의 잔류자속밀도는 0.87 T의 높은 값을 보였으며, 분쇄하기전 리본의 잔류자속밀도에 비하여 약 5% 정도 높았다. 이상의 결과로 부터 리본의 자유표면은 이방화가 되고 나머지 부분은 HIREM 특성을 나타내는 새로운 형태의 고특성 급속응고리본의 제조가 가능할 것으로 사료된다.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.434-439
• /
• 2010

This study fabricated a simulation facility which reduced the structure of a current distribution line to 50:1 in order to analyze the induced lightning shielding effect of a 22.9kV-Y distribution line according to ground resistance capacity, grounding locations, etc. When installing an overhead ground wire, the standard for grounding a distribution line with a current of 22.9kV-Y requires that ground resistance in common use with the neutral line be maintained less than $50\Omega$every 200m span. The reduced line for simulation had 7 electric poles and induced lightning was applied to the ground plane 2m apart from the line in a direction perpendicular to it using an impulse generator. If induced voltage occurred in the line and induced current flowed through the line due to the applied current, the induced voltage and current of the 'A' phase were measured respectively using an oscilloscope. When all 7 electric poles were grounded with a ground resistance of less than $50\Omega$ respectively, the combined resistance of the line was $7.4\Omega$. When an average current of 230A was applied, the average induced voltage and current measured were 1,052V and 13.8A, respectively. Under the same conditions, when the number of grounding locations was reduced, the combined resistance as well as induced voltage and current showed a tendency to increase. When all 7 electric poles were grounded with a ground resistance of less than $100\Omega$, the combined resistance of the line was $14.9\Omega$. When an average current of 236A was applied, the average induced voltage and current of the 'A' phase calculated were 1,068V and 15.6A, respectively. That is, in this case, only the combined resistance was greater than when all 7 electrical poles were grounded, and the induced voltage and current were reduced. Therefore, it is thought that even though ground resistance is slightly higher under a construction environment with the same conditions, it is advantageous to ground all electric poles to ensure system safety.

• 한국인터넷방송통신학회논문지
• /
• 제24권1호
• /
• pp.37-42
• /
• 2024

본 논문은 NP-완전으로 최적 해를 구하는 다항시간 알고리즘이 알려져 있지 않은 절단 폭 최소화 문제에 대해 다항시간 알고리즘을 제안하였다. 주어진 그래프 G=(V,E),m=｜V｜, n=｜E｜ 에 대한 최소 절단 폭 CW_f(G)=max_𝜈∈_VCW_f(𝜈)를 찾기 위해 제안된 알고리즘은 첫 번째로, 최대차수 정점 𝜈_i를 기준으로 N_G[𝜈_i] 정점들을 𝜈_i를 통과하는 간선수가 최소가 되도록 양분하는 열 절단면을 찾고, 좌·우의 N_G[𝜈_i]들 간의 통과 간선수가 최소가 되는 행 절단면으로 분할하였다. 두 번째로, 각 부 그래프 내부의 정점들을 선형으로 연결하고, 부 그래프들 간 간선을 연결하여 하나의 선형 배열을 만들었다. 마지막으로, 정점을 이동시켜 최소 절단폭을 갖는 최적화 과정을 수행하였다. 다양한 그래프들을 대상으로 실험한 결과, 수행 복잡도가 O(n²)인 제안된 알고리즘을 모든 데이터들에 대해 최적 해를 찾을 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.298-298
• /
• 2014

Quantum dot infrared photodetectors (QDIPs) based on Stranski-Krastanov (SK) quantum dots (QDs) have been widely explored for improved device performance using various designs of heterostructures. However, one of the biggest limitations of this approach is the "pancake" shape of the dot, with a base of 20-30 nm and a height of 4-6 nm. This limits the 3D confinement in the quantum dot and reduces the ratio of normal incidence absorption to the off-axis absorption. One of the alternative growth modes to the formation of SK QDs is a sub-monolayer (SML) deposition technique, which can achieve a much higher density, smaller size, better uniformity, and has no wetting layer as compared to the SK growth mode. Due to the advantages of SML-QDs, the SML-QDIP design has attractive features such as increased normal incidence absorption, strong in-plane quantum confinement, and narrow spectral wavelength detection as compared with SK-DWELL. In this study, we report on the improved device performance of InAs/InGaAs SML-QDIP with different composition of $Al_xGa1-_xAs$ barrier. Two SML-QDIPs (x=0.07 for sample A and x=0.20 for sample B) are grown with the 4 stacks 0.3 ML InAs. It is investigated that sample A with a confinement-enhanced (CE) $Al_{0.22}Ga_{0.78}As$ barrier had a single peak at $7.8{\mu}m$ at 77 K. However, sample B with an $Al_{0.20}Ga_{0.80}As$ barrier had three peaks at (${\sim}3.5{\mu}m$, ${\sim}5{\mu}m$, ${\sim}7{\mu}m$) due to various quantum confined transitions. The measured peak responsivities (see Fig) are ~0.45 A/W (sample A, at $7.8{\mu}m$, $V_b=-0.4V$ bias) and ~1.3 A/W (sample B, at $7{\mu}m$, $V_b=-1.5V$ bias). At 77 K, sample A and B had a detectivity of $1.2{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-0.4V$ bias) and $5.4{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-1.5V$ bias), respectively. It is obvious that the higher $D^*$ of sample B (than sample A) is mainly due to the low dark current and high responsivity.

• 대한공간정보학회지
• /
• 제23권2호
• /
• pp.39-48
• /
• 2015

최근, 무인항공촬영시스템(UAV, UAS, 또는 드론)은 자료취득을 위한 플랫폼 및 측정기기로서 사진측량의 응용분야, 특히 고밀도 측점자료(HDPC : High Density Point Clouds) 구성에 큰 관심이 모아지고 있다. 본 연구는 저가회전익 UAS 영상에 의한 시험대상지 지표면의 고밀도 측점자료를 구성하고 위치 정확도를 평가한 내용이다. 정확도 평가는 62개의 지상 검사점에 대한 Network RTK GNSS 측량 결과를 기준으로 UAS 기반 HDPC 모형의 좌표와 비교 검토하였다. 연구결과, 작업지역 정사영상 내, 검사점의 평면 및 수직 좌표성분의 평균제곱근오차(RMSE)는 각각 ${\sigma}_H={\pm}0.102m$ 및 ${\sigma}_V={\pm}0.209m$, 수직 좌표성분의 최대오차는 0.570m로서 '영상지도제작 작업규정'에 따른 축척 1:1000(출력 시, 평면위치오차 1m)의 정사영상모자익 제작이 가능하였다. 또한, 격자규격 $1m{\times}1m$, 수치지도축척 1:1000의 수치표고모델을 제작할 경우, '항공레이저측량 작업규정'제한 기준에는 약간 미흡하였지만, 소규모지역을 대상으로 회전익 무인항공촬영시스템에 의한 축척 1:1000~1:2500의 정사영상 및 수치표고모델 제작의 가능성을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.22-27
• /
• 2006

The electronic band structures of Metal-doped titanium dioxide, M-doped $TiO_2$ (M=Co, Cr, Fe), have been studied by using XRD, UV-vis diffuse reflectance spectrometer and FP-LAPW (Full-Potential Linearized Augmented-Plane-Wave) method. The UV-vis of M-doped $TiO_2$ (M=Co, Cr, Fe) showed two absorption edges; the main edge due to the titanium dioxide at 387 nm and a shoulder due to the doped metals at around 560 nm. The band gap energies of Co, Cr and Fe-doped $TiO_2$ calculated by FP-LAPW method were 2.6, 2.0, and 2.5 eV, respectively. The theoretically calculated band gap energy of $TiO_2$ by using FP-LAPW method was the same as experimental results. FP-LAPW method will be useful for fabrication and development of photo catalysts working under visible light.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.348-351
• /
• 1995

A modified silicon direct bonding method has been developed alloying an intimate contact between grooved and smooth mirror-polished oxide-free silicon wafers. A regular set of grooves was formed during preparation of heavily doped $p^+$-type grid network by oxide-masking und boron diffusion. Void-free bonded interfaces with filing of the grooves were observed by x-ray diffraction topography, infrared, optical. and scanning electron microscope techniques. The presence of regularly formed grooves in bending plane results in the substantial decrease of dislocation over large areas near the interface. Moreover two strongly misoriented waters could be successfully bonded by new technique. Diodes with bonded a pn-junction yielded a value of the ideality factor n about 1.5 and the uniform distribution of series resistance over the whole area of horded pn-structure. The suitability of the modified technique was confirmed by I - V characteristics of power diodes and reversly switched-on dynistor(RSD) with a working area about $12cm^2$. Both devices demonstrated breakdown voltages close to the calculation values.

• 한국결정성장학회지
• /
• 제4권1호
• /
• pp.63-70
• /
• 1994

초이온도전체 ${\beta}-Ag_3SI$ 단결정을 AgI와 $AG_2S$의 혼합물을 반응시켜서 열처리하여 얻었다. 성장시킨 단결정은 직경 $200{mu}m$ 정도의 구상으로 성형시켰다. 실온에서 X-선 단결정 해석법을 이용하여 정밀한 결정구조 해석을 행했다. 이들 결정구조의 해석결과 ${\beta}-Ag_3SI$의 $Ag^+$는 6-배위의 3c자리보다 4-배위의 12h자리에 점유함이 밝혀졌다. $Ag^+$의 확률밀도분포(probabilty density function)로 부터 [110]방향에서 $Ag^+$의 one-particle potential(o.p.p.)을 계산하였다.${beta}-Ag_3SI$ 구조의(001)면에서 $Ag^+$가 확산에 필요한 활성화에너지는 0.012eV라는 것이 o.p.p.곡선에 의해 계산되었다.

• 한국정보통신학회논문지
• /
• 제16권11호
• /
• pp.2480-2486
• /
• 2012

본 논문에서는 WCDMA(Wide Code Division Multiple Access) 시스템 사양을 만족시키는 주파수 합성기 블록 중 위상잡음 및 전력소모의 최적 설계가 필요한 저전압 LC-VCO (voltage controlled oscillator)의 설계를 제안 하였다. 최적 설계를 위해 LC-tank의 손실성분을 보상하는 MOS트랜지스터의 전달컨덕턴스와 인덕턴스 평면에 여유이득 라인과 튜닝 범위 라인을 그어 설계 가능한 영역 내에서 위상잡음이 최소가 되는 파라미터 값을 구하였다. 모의실험 결과 위상잡음 특성은 1MHz옵셋에서 -113dBc/Hz였다. 최적 설계된 LC-VCO는 0.25um CMOS 공정을 이용하여 제작되었다. 칩 측정결과 LC-VCO의 위상잡음 특성은 1MHz 옵셋에서 -116dBc/Hz였다. 전력소모는 15mW였으며, Kvco는 370MHz/V였다.

• 천문학회지
• /
• 제18권2호
• /
• pp.41-69
• /
• 1985

For the well observed 16 globular clusters with known metal abundance (Z), the helium abundances (Y) and ages are determined by various methods, and the relations between Y, Z and age are examined. The luminosity $L_{RR}$ of RR Lyrae stars is known to be dependent of evolutionary models and pulsation theory in the sense that the pulsation theory and horizontal branch (HB) models yield the anticorrelation between $L_{RR}$ and Z whereas main sequence (MS) and red giant branch (RGB) models yield the direct correlation between them. Similarly the anticorrelation between Y and Z is obtained from the HB models and pulsation theory whereas the direct correlation between them is obtained when the RGB model is applied. The current evolutionary models yield the anticorrelation between Z and age of clusters whenever the direct correlation between Y and Z holds. However when the anticorrelation between Y and Z is applied for age determination, the similar age of clusters is obtained as shown by Sandage (1982b). The ages, which are determined by the fitting of C-M diagrams to isochrones in the ($M_v$, B-V)-plane, suggest the two different chemical enrichment processes, which could be accounted for by the disk-halo model for the chemical evolution of the Galaxy (Lee and Ann 1981). Also it is known that the R-method is very useful for Y-determination and the derived Y's show the increasing rate of $\frac{{\Delta}Y}{{\Delta}Z}{\simeq}0.5$ which is comparable to the observed value of $\frac{{\Delta}Y}{{\Delta}Z}{\simeq}0.3$ from HII regions and planetary nebulae by Peimbert and Torres-Peimbert (1976). In this case, the age-metallicity relation of globular clusters could be explained by the disk-halo model.