• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.3-11
• /
• 2006

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant properties; the minor loop property and the wiping-out. property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.173-176
• /
• 2011

Fe-Cr alloys with different Cr contents were prepared by an arc melting technique. The alloys were isochronally aged in the range from $400^{\circ}C$ to $900^{\circ}C$ with $50^{\circ}C$ steps with a holding time of 100 hours. The ageing produced embrittlement in the alloys due to either the formation of a Cr-rich ${\alpha}'$ phase or a $\sigma$ phase at high temperatures. Magnetic Hysteresis Loop (MHL) and Micro-Vickers hardness were measured at each step to correlate the magnetic and mechanical properties. Coercivity and hardness of the alloys were increased and remanence decreased up to 500-$550^{\circ}C$ due to formation of a Cr-rich ${\alpha}'$ phase. Beyond 500-$550^{\circ}C$ range, the coercivity and hardness decreased and remanence increased due to the coarsening or dissolution of the Cr-rich ${\alpha}'$ phase. In the Fe-48% Cr alloy, formation of the $\sigma$ phase at $700^{\circ}C$ reduced the maximum induction of the alloy significantly.

• 열처리공학회지
• /
• 제31권1호
• /
• pp.18-23
• /
• 2018

In this study, low cyclic fatigue test was carried out at room temperature condition for rolled STS304 steel. The results of this study show that rolled STS304 steel has excellent static tensile strength and fatigue characteristics. The relationship between plastic strain range and fatigue life was examined using the triangular wave in order to predict the low cycle fatigue life of rolled STS304 steel by Coffin-Manson equation. Cyclic behavior of rolled STS304 steel was characterized by cyclic hardening with increasing number of cycle through the Hysteresis loop analysis and cyclic response of maximum stress versus number of cycles. It is found that the plastic deformation energy consumed per cycle is reduced by calculating the area of the hysteresis loop.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.350-355
• /
• 2005

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR Product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant Properties; the minor loop property and the wiping-out property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.900-904
• /
• 1995

돌림힘 자력계를 이용하여 일축 이방성 자성체의 M-H 이력 곡선을 측정하는 새방법을 개발하였다. 본 방법에 의한 M-H 이력 곡선으로부터 포화 및 잔류 자기화량과 보자력을 얻을 수 있었다. 본 방법의 정확도는 자기회사 비균질한 보자력 근처의 인가 자기 마당에서도 영향받지 않았다. $2{\times}10^{-3}$ dyn cm의 측정 감도를 갖는 돌림힘 자력계를 이용한 자기화량 측정에서 $10^{-6}$ emu 이상의 고감도를 얻었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1705-1707
• /
• 1997

In this work, a possible new PD de technique, based on the electro-optic effect(P effect), has been proposed. The refractive index ellipsoid of EO crystal, as $LiNbO_3$, is changed by both the externally a electric field and its hysteresis loop of which effect on this hysteresis loop gives rise t discrepancy of index variation. Therefore, an eq regarding the phase variation of modulated beam through $LiNbO_3$ crystal under applied e field, is newly proposed considering the influen hysteresis characteristics. For this purpose generated from needle-plane electrode in oil has detected by use of $LiNbO_3$ cell and analyzed b equation. As a result, it is observed that PD measu phase intervals are limited by the cr characteristics such as asymmertrical P-E hyst and half-wave voltage.

• 한국자기학회지
• /
• 제5권3호
• /
• pp.216-221
• /
• 1995

자성분말의 보자력$(H_{c})$과 보자력 분포도는 조성 이외의 제조공정인자에 크게 의존하는 값으로 자성분말 제조시 재현성을 결정하는 중요한 물성중의 하나이다. 자성분 말의 자기적 물성을 측정하는 VSM을 이용하여 쉽고 간단하게 보자력 분포도를 측정하는 방법과 그 응용예를 제시하였다. 보자력 분포도 측정은 magnetic hysteresis loop 의 dM/dH 대 H 곡선의 형태와 반치폭에서 얻을 수 있다. dM/dH 곡선 형태가 분리되는 것 없이 반치폭이 작아질수록 보자력 분포도는 더 균일해짐을 나타낸다. 보자력이 다 른 Ba-Ferrite와 ${\gamma}-Fe_{2}O_{3}$ 혼합물 중 Ba-Ferrite의 $H_{c}$가 높아질수록 dM/dH 대 H 곡선 형태는 peak broadening 후 peak splitting으로 나타나며, 이 peak splitting은 혼합자성분말의 $H_{c}$ 차이가 600 Oe 이상일 때 일어난다. 또한 dM/dH 대 H 곡선의 응용으로는 자성분말 보자력 분포도 측정, Ba-Ferrite 구조내로 dopants의 치환 능력 및 ${\alpha}-Fe$의 산화거동을 연구하는데 사용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1320-1322
• /
• 1997

The distribution of coercivity in the thickness direction were investigated by using Kerr hysteresis loop tracer for the Co-Cr films deposited by Facing Targets Sputtering apparatus. It $H_{c{\bot}}(S)- H_{c{\bot}}(I)$ correlated strongly with ${\Delta}H_c$, which represents the degree of distribution of coercivity. Furthermore, the Cr content was varied in order to improve the coercivity of intial growth layer $H_{c{\bot}}(I)$ took a maximum value of 750 Oe and the distribution of coercivity became sharper at the Cr content of 25 at.%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.93-96
• /
• 2002

In this study, PZT thin films were fabricated using sol-gel processing onto Si/$SiO_2$/Ti/Pt substrates. PZT sol with different Zr/Ti ratio(20/80, 30/70, 40/60, 52/48) were prepared, respectively. The films were fabricated by using the spin-coating method on substrates. The films were heat treated at $450^{\circ}C$, $650^{\circ}C$ by rapid thermal annealing(RTA). The preferred orientation of the PZT thin films were observed by X-ray diffraction(XRD), and Scanning electron microscopy(SEM). All of the resulting PZT thin films were crystallized with perovskite phase. The fine crystallinity of the films were fabricated. Also, we found that the ferroelectric properties from the dielectric constant of the PZT thin films were over 600 degrees, P-E hysteresis constant. And the leakage current densities of films were lower than $10^{-8}A/cm^2$. It is concluded that the PZT thin films by sol-gel process to be convinced of application for ferroelectric memory device.

• 한국수자원학회논문집
• /
• 제39권6호
• /
• pp.487-494
• /
• 2006

화원 지점의 홍수시 유량은 수위가 상승할 때와 하강할 때 동일한 수위에 대해 많은 차이를 나타내고, 이와 같이 이력효과의 크기가 클 경우에는 많은 오차가 발생할 수 있다. 유량 환산 오차를 줄이기 위해 낙동강 본류 화원 수위관측소 지점에 대한 고리모양 수위-유량 관계곡선을 작성하였다. 하천유량과 단순 환산된 유량의 편차를 계산하기 위해 부정류 모의 사례로부터 (수위, 유량) 자료쌍을 획득하여 단순 수위-유량 관계곡선식을 작성하였다. 이 관계에서 이탈하는 유량편차 ${\Delta}Q$와 수위변화 따른 하천폭과 시간변화율의 곱인 $B{\Delta}h/{\Delta}t$와의 관계로부터 고리모양 수위-유량 관계의 유량을 구하였다. ${\Delta}Q$와 $B{\Delta}h/{\Delta}t$는 높은 상관관계를 나타내었다. 이로부터 계산된 유량은 1997년의 수위 7m이상 관측유량 11개 중 7개가 고리모양 수위-유량 환산관계의 유량과 10% 이내의 차이를 보였고, 수위 9m이상의 1998년 관측유량은 고리모양에 근접하였다. 화원 지점과 같이 고리폭이 큰 지점은 단순 수위-유량 관계보다 고리모양 수위-유량 관계를 적용하는 것이 유량 환산의 오차를 줄 일 수 있을 것으로 기대된다.