• 제목/요약/키워드: M-G Set

검색결과 542건 처리시간 0.026초

수도권 초미세먼지 농도모사 : (II) 오염원별, 배출물질별 자체 기여도 및 전환율 산정 (PM2.5 Simulations for the Seoul Metropolitan Area: (II) Estimation of Self-Contributions and Emission-to-PM2.5 Conversion Rates for Each Source Category)

  • 김순태;배창한;유철;김병욱;김현철;문난경
    • 한국대기환경학회지
    • /
    • 제33권4호
    • /
    • pp.377-392
    • /
    • 2017
  • A set of BFM (Brute Force Method) simulations with the CMAQ (Community Multiscale Air Quality) model were conducted in order to estimate self-contributions and conversion rates of PPM (Primary $PM_{2.5}$), $NO_x$, $SO_2$, $NH_3$, and VOC emissions to $PM_{2.5}$ concentrations over the SMA (Seoul Metropolitan Area). CAPSS (Clean Air Policy Support System) 2013 EI (emissions inventory) from the NIER (National Institute of Environmental Research) was used for the base and sensitivity simulations. SCCs (Source Classification Codes) in the EI were utilized to group the emissions into area, mobile, and point source categories. PPM and $PM_{2.5}$ precursor emissions from each source category were reduced by 50%. In turn, air quality was simulated with CMAQ during January, April, July, and October in 2014 for the BFM runs. In this study, seasonal variations of SMA $PM_{2.5}$ self-sensitivities to PPM, $SO_2$, and $NH_3$ emissions can be observed even when the seasonal emission rates are almost identical. For example, when the mobile PPM emissions from the SMA were 634 TPM (Tons Per Month) and 603 TPM in January and July, self-contributions of the emissions to monthly mean $PM_{2.5}$ were $2.7{\mu}g/m^3$ and $1.3{\mu}g/m^3$ for the months, respectively. Similarly, while $NH_3$ emissions from area sources were 4,169 TPM and 3,951 TPM in January and July, the self-contributions to monthly mean $PM_{2.5}$ for the months were $2.0{\mu}g/m^3$ and $4.4{\mu}g/m^3$, respectively. Meanwhile, emission-to-$PM_{2.5}$ conversion rates of precursors vary among source categories. For instance, the annual mean conversion rates of the SMA mobile, area, and point sources were 19.3, 10.8, and $6.6{\mu}g/m^3/10^6TPY$ for $SO_2$ emissions while those rates for PPM emissions were 268.6, 207.7, and 181.5 (${\mu}g/m^3/10^6TPY$), respectively, over the region. The results demonstrate that SMA $PM_{2.5}$ responses to the same amount of reduction in precursor emissions differ for source categories and in time (e.g. seasons), which is important when the cost-benefit analysis is conducted during air quality improvement planning. On the other hand, annual mean $PM_{2.5}$ sensitivities to the SMA $NO_x$ emissions remains still negative even after a 50% reduction in emission category which implies that more aggressive $NO_x$ reductions are required for the SMA to overcome '$NO_x$ disbenefit' under the base condition.

넙치(Paralichthys olivaceus) Terrine 제품의 제조 및 품질특성 (Processing and Property of Olive Flounder Paralichthys olivaceus Terrine)

  • 윤문주;이재동;박시영;권순재;박진효;강경훈;최종덕;주종찬;김정균
    • 수산해양교육연구
    • /
    • 제27권4호
    • /
    • pp.1084-1091
    • /
    • 2015
  • 5겹 편뜨기한 넙치 육 50 g을 chopper로 마쇄한 후 계란 흰자, 생크림, 레몬즙, 브랜디, 소금 및 후추를 첨가하여 반죽하였다. 랩 위에 평평하게 편 반죽(25 g) 위에 치즈(4 g)를 올리고 다시 반죽(25 g)을 덮은 후 랩으로 돌돌 말고 호일로 감싸서 끓는 물에 5분간 익혀 폴리에틸렌 필름($20{\times}30{\times}0.05mm$)에 진공 포장한 제품을 Terrine-1, 끓는 물에 익히지 않고 바로 진공 포장한 제품을 Terrine-2로 하였다. 동결 상태의 Terrine-1을 전자레인지로 해동하고 데운(2분간) Sample-1과 동결상태의 Terrine-2를 해동한 후 끓는 물에 5분간 익힌 Sample-2의 이화학적 성질과 관능적 특성에 대하여 살펴보았다. Sample-1과 Sample-2 모두 생균수가 검출되지 않았으며, 일반성분의 경우 수분함량은 각각 31.0 및 30.4%, 조단백질은 각각 17.7 및 18.6%, 조지방은 두 시료 모두 8.3%, 조회분은 각각 1.4 및 1.5%로 거의 차이가 없었다. pH는 각각 6.48 및 6.37로 거의 차이가 없었다. 조직감의 경우 Sample-1이 $16.67g/cm^2$, Sample-2가 $23.00g/cm^2$으로 Sample-2가 더 높은 값이었다. Sample-1과 Sample-2의 TBA 값은 큰 차이가 없었다. Sample-1과 Sample-2의 총유리아미노산 함량은 각각 2050.5 및 2065.2 mg/100 g으로 비슷하였으며, 두 시료 모두에서 glutamic acid가 16.6%로 가장 많은 함량이었으며, 다음으로 lysine, leucine 및 aspartic acid 순이었다. 관능검사 결과 Sample-2의 관능적 기호도가 Sample-1보다 조금 높았다.

An Extended Force Density Method for the form finding of cable systems with new forms

  • Malerba, P.G.;Patelli, M.;Quagliaroli, M.
    • Structural Engineering and Mechanics
    • /
    • 제42권2호
    • /
    • pp.191-210
    • /
    • 2012
  • The Force Density Method (FDM) is a well known and extremely versatile tool in form finding of cable nets. In its linear formulation such method makes it possible to find all the possible equilibrium configurations of a net of cables having a certain given connectivity and given boundary conditions on the nodes. Each singular configuration corresponds to an assumed force density distribution. Its improvement as Non-Linear Force Density Method (NLFDM) introduces the possibility of imposing assigned relative distances among the nodes, the tensile level in the elements and/or their initial undeformed length. In this paper an Extended Force Density Method (EFDM) is proposed, which makes it possible to set conditions in terms of given fixed nodal reactions or, in other words, to fix the positions of a certain number of nodes and, at the same time, to impose the intensity of the reaction force. Through such extension, the (EFDM) enables us to deal with form findings problems of cable nets subjected to given constraints and, in particular, with mixed structures, made of cables and struts. The efficiency and the robustness of method are assessed through comparisons with other form finding techniques in dealing with characteristic applications to the prestress design of cable systems. As a further extension, the EFDM is applied to structures having some parts not yet geometrically defined, as can happen in designing new creative forms.

통계실험계획법을 통한 중요인자 선정에 의한 형질전환 담배세포에서 hGM-CSF 생산 증대 연구

  • 이기용;최성훈;홍석미;김동일
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2003년도 생물공학의 동향(XII)
    • /
    • pp.274-278
    • /
    • 2003
  • 통계실험계획법 중 하나인 Plackette-Burman법을 사용하여 실험을 설계하였으며, 수행된 실험을 통하여 6가지 인자 중 main effect의 절대값이 높은 당, nitrogen, 온도를 최종 선정할 수 있었으며, main effect 값이 양의 값을 가지는 당과 nitrogen은 첨가 농도가 높을수록, 음의 값을 가지는 온도는 낮을수록 실험에 유리하다는 것을 확인할 수 있었다.

  • PDF

Emissions of Marine Heavy Fuel Oil in the Spray Flame

  • An, Suk-Heon
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권7호
    • /
    • pp.1030-1035
    • /
    • 2008
  • Recently, the International Maritime Organization makes an effort for an effective solution against the emissions from shipping in the international maritime industry. The objective of the study was to quantify the exhaust emissions of marine heavy fuel oil in the combustion process of the spray flame. An experiment was performed to measure CO, $CO_2$, NOx, $SO_2$, ${N_2}O$, DS, SOF and the other components with the flame temperature. The sampling probe was directly set up in the flame fields at each position of 103, 324, 545, 766 and 987mm vertically apart from the fuel-injected nozzle in the burner furnace. From the results of the study, it was estimated that approximately 270ppm of oxides of nitrogen (NOx), $1000{\sim}1400ppm$ of sulfur dioxide ($SO_2$), 8ppm of nitrous oxide (${N_2}O$), $2.0{\sim}2.5g/m^3$ of particulate matter (PM) divided with dry soot (DS) and soluble organic fraction (SOF) and $60{\sim}80mg/m^3$ of sulfuric acid. With respect to further development of this work, the emission quantification could also be applied to assessing emission reduction from the international shipping.

강화도 지역에서 겨울철 $PM_{205}$의 화학적 성분 특성 (Characteristics of Chemical Species in $PM_{205}$ during the Winter in Kangwha)

  • 여현구
    • 한국대기환경학회지
    • /
    • 제16권4호
    • /
    • pp.309-316
    • /
    • 2000
  • Chemical compositions of air pollutants with fine particles (<2.5 ${\mu}{\textrm}{m}$, PB2.5) were evaluated at background site. Kangwha. in Korea during the winter season. The data set was obtained for seventeed days with 24-hour sampling from December 11 to 16, 1996 and from January 9 to 1997. The chemical species have been measured {{{{ {SO }`_{4 } ^{2- } }}}}, {{{{ { NO}`_{3 } ^{- } }}}}, {{{{ { NH}`_{4 } ^{+ } }}}}. OC and EC in the particulate phase, NH3 HNO3, HCl and SO2 in the gas phase using the three stage filter pack method. Mean concentration ($\mu\textrm{g}$/m3) of this study were : 35.42 for PM2.5 8.78 for organic carbon (OC) 7.25 for nss {{{{ {SO }`_{4 } ^{2- } }}}}, 4.94 for {{{{ { NO}`_{3 } ^{- } }}}}, 3.58 for {{{{ { NH}`_{4 } ^{+ } }}}} and 1.48 for elemental carbon (EC) respectively. Contributive rates of major particulate components in PM2.5 were OC (25%) nss- {{{{ {SO }`_{4 } ^{2- } }}}}(20%) ,{{{{ { NO}`_{3 } ^{- } }}}}(14%) {{{{ { NH}`_{4 } ^{+ } }}}}(10%) and EC (4%) respectively and these components could be accounted for 73% of PM2.5 mass. Reactive forms of {{{{ { NH}`_{4 } ^{+ } }}}} were considered as NH4HO3 and NH4{{{{ {SO }`_{4 } ^{2- } }}}} during the sampling periods. {{{{ { NO}`_{3 } ^{- } }}}}/({{{{ { NO}`_{3 } ^{- } }}}} + HNO3) and {{{{ {SO }`_{4 } ^{2- } }}}}/({{{{ {SO }`_{4 } ^{2- } }}}} + SO2) were calculated 0.8 and 0.9 respectively. Most of these compounds might be formed in partiiculate phase in the air. Correlation coefficient between OC and EC was 0.866 which might have the same sources during the sampling periods,.

  • PDF

HEMT 소자 제작을 위한 GaAs/AlGaAs층의 선택적 건식식각 (Selective Dry Etching of GaAs/AlGaAs Layer for HEMT Device Fabrication)

  • 김흥락;서영석;양성주;박성호;김범만;강봉구;우종천
    • 전자공학회논문지A
    • /
    • 제28A권11호
    • /
    • pp.902-909
    • /
    • 1991
  • A reproducible selective dry etch process of GaAs/AlGaAs Heterostructures for High Electron Mobility Transistor(HEMT) Device fabrication is developed. Using RIE mode with $CCl_{2}F_{2}$ as the basic process gas, the observed etch selectivity of GaAs layer with respect to GaAs/$Al_{0.3}Ga_{0.7}$As is about 610:1. Severe polymer deposition problem, parialy generated from the use of $CCl_{2}F_{2}$ gas only, has been significantly reduced by adding a small amount of He gas or by $O_{2}$ plasma ashing after etch process. In order to obtain an optimized etch process for HEMT device fabrication, we com pared the properties of the wet etched Schottky contact with those of the dry etched one, and set dry etch condition to approach the characteristics of Schottky diode on wet etched surface. By applying the optimized etch process, the fabricated HEMT devices have the maximum transconductance $g_{mext}$ of 224 mS/mm, and have relatively uniform distribution across the 2inch wafer in the value of 200$\pm$20mS/mm.

  • PDF

새로운 SDB 기술과 대용량 반도체소자에의 응용 (A Modified SDB Technology and Its Application to High-Power Semiconductor Devices)

  • 김은동;박종문;김상철;민원기;이언상;송종규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 추계학술대회 논문집 학회본부
    • /
    • pp.348-351
    • /
    • 1995
  • A modified silicon direct bonding method has been developed alloying an intimate contact between grooved and smooth mirror-polished oxide-free silicon wafers. A regular set of grooves was formed during preparation of heavily doped $p^+$-type grid network by oxide-masking und boron diffusion. Void-free bonded interfaces with filing of the grooves were observed by x-ray diffraction topography, infrared, optical. and scanning electron microscope techniques. The presence of regularly formed grooves in bending plane results in the substantial decrease of dislocation over large areas near the interface. Moreover two strongly misoriented waters could be successfully bonded by new technique. Diodes with bonded a pn-junction yielded a value of the ideality factor n about 1.5 and the uniform distribution of series resistance over the whole area of horded pn-structure. The suitability of the modified technique was confirmed by I - V characteristics of power diodes and reversly switched-on dynistor(RSD) with a working area about $12cm^2$. Both devices demonstrated breakdown voltages close to the calculation values.

  • PDF

녹용약침액(鹿茸藥鍼液)의 DNA chip을 이용(利用)한 유전자(遺傳子) 발현(發顯) 분석(分析) (Gene Expression Analysis Using cDNA Microarray Assay by Cervi Pantotricuhum Cornu Herbal Acupuncture)

  • 한상원;서정철;이윤호;최제용
    • Journal of Acupuncture Research
    • /
    • 제20권3호
    • /
    • pp.34-44
    • /
    • 2003
  • Objective : Bone homeostasis is maintained by balance of bone formation and resorption. Therefore, bone related diseases arose by disturbance of this balance between osteoblast and osteoclast activities. To develop a successful screening system the therapeutic components based on oriental medicine is essential to set up systematic approach for that purpose. The purpose of this study is to the know the gene expression using cDNA microarray assay. Methods : Cervi Pantotricuhum Cornu Herbal-acupuncture extract was prepared by boiling. human osteosarcoma cells(HOS) were treated with Cervi Pantotricuhum Cornu Herbal-acupuncture solution. Then mRNA was extracted and cDNA microarray assay was performed. Results : Human osteosarcoma cells(HOS) treated with Cervi Pantotricuhum Cornu Herbal-acupuncture solution($500{\mu}g/m{\ell}$) showed that thioredoxin, TAFII31 and two novel genes were increased. However many genes decreased their expression by Cervi Pantotricuhum Cornu Herbal-acupuncture. Conclusions : This type of approach will give a good chance to explore the favorable effects of Cervi Pantotricuhum Cornu Herbal-acupuncture. Further study is needed for investigating the effect of Cervi Pantotricuhum Cornu Herbal-acupuncture.

  • PDF

기존하수처리장에서 자성체 이온교환수지를 이용한 하수처리공정 적용가능성 평가 (Applicability Evaluation of the Wastewater Treatment System Using Magnetic Ion Exchange Resin in the Existing Wastewater Treatment Plant)

  • 박찬규;김희수;이정무
    • 한국유체기계학회 논문집
    • /
    • 제17권2호
    • /
    • pp.35-40
    • /
    • 2014
  • The optimal removal efficiency to develop wastewater treatment system using the magnetic ion exchange resin. The secondary sedimentation effluent of wastewater in W wastewater treatment plant located in Gyeong-gi Province was used as the influent. To compare the sedimentation effluent reacted with the magnetic ion exchange resin to the influent, the concentrations of CODmm, TN, $NO{_3}^-$-N and TP were measured. The flux of the influent and HRT were set to 250 mL/min, 10 min, respectively, and BVTR has adjusted to 200, 150, 100. The removal efficiency of CODmn, TN, $NO{_3}^-$-N and TP in the 200 BVTR from 71%, 40.37%, 46.34%, 42.03%, 150 BVTR from 55.22%, 37.83%, 50.38% 41.6% and 100 BVTR from 74%, 59.15%, 79.94%, 79.16%, respectively. The results on 200 BVTR, 150 BVTR, 100 BVTR tests show that 100 BVTR is the optimal factor capable of the highest rate of rejection of the organic material.