• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.10
• /
• pp.1186-1194
• /
• 2017

Recently, many people have demanded reliable nutritional data even for minor-components. On the other hand, an analytical method for the analyses of vitamin $B_5$ and $B_6$ is lacking. Therefore, this study attempted to validate with accuracy and precision the analysis of vitamin $B_5$ and $B_6$ using a high-performance liquid chromatography (HPLC) method. The vitamin $B_5$ and $B_6$ contents were analyzed using an Agilent 1260 series HPLC system. YMC-Pack ODS-AM ($250{\times}4.6mm$ I.D.) and YMC-Pack Pro RS $C_{18}$ ($250{\times}4.6mm$ I.D.) columns were used for the analyses of vitamin $B_5$ and $B_6$, respectively. In the case of vitamin $B_5$, the flow rate was set to 1.0 mL/min by isocratic elution using the 50 mM $KH_2PO_4$ solution (pH 3.5)/acetonitrile (ACN) (95:5, v/v) with monitoring at 200 nm using HPLC/DAD, whereas the flow rate for vitamin $B_6$ was set to 1.0 mL/min of flow rate by isocratic elution using a 20 mM $CH_3CO_2Na$ solution (pH 3.6)/ACN (97:3, v/v) with monitoring by excitation at 290 nm and emission at 396 nm using HPLC/FLD. The column temperature was set to $30^{\circ}C$. The injection volume was $20{\mu}L$ for each experiment. The specificity of the accuracy and precision for vitamin $B_5$ and $B_6$ were also validated by HPLC. The results showed high linearity in the calibration curve for vitamin $B_5$ ($R^2=0.9998^{{\ast}{\ast}}$), the limit of detection (LOD) and limit of quantitation (LOQ) were 0.4 mg/L and 1.3 mg/L, respectively, In contrast, for the calibration curve of vitamin $B_6$, which showed high linearity ($R^2=0.9999^{{\ast}{\ast}}$), the LOD and LOQ were 0.006 mg/L and 0.02 mg/L, respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.285-288
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. Tensile tests and R-value tests were carried out at several levels of temperature and strain-rate from $25^{\circ}C$ to $300^{\circ}C$ and 0.16 to 0.00016/s, respectively to obtain the mechanical properties of AZ31B magnesium alloy sheet. The FLD of this material was experimentally obtained by limit dome height tests with the punch velocity of 0.1 and 1.0 mm/s at $250^{\circ}C$. The M-K theory-based FLD predicted using Yld2000-2d yield criterion was compared with the experimental results.

• The Pure and Applied Mathematics
• /
• v.16 no.1
• /
• pp.31-46
• /
• 2009

In this paper we study the geometry of Einstein half light like submanifolds M of a Lorentz manifold ($\bar{M}$(c), $\bar{g}$) of constant curvature c, equipped with an integrable screen distribution on M such that the induced connection ${\nabla}$ is a metric connection and the operator $A_u$ is a screen shape operator.

• The Pure and Applied Mathematics
• /
• v.10 no.2
• /
• pp.71-102
• /
• 2003

The purpose of this paper is to study the geometry of null curves in a 6-dimensional semi-Riemannian manifold $M_q$ of index q, since the general n-dimensional cases are too complicated. We show that it is possible to construct three types of Frenet equations of null curves in $M_q$, supported by one example. We find each types of Frenet equations invariant under any causal change. And we discuss some properties of null curves in $M_q$.

• Journal of Magnetics
• /
• v.14 no.1
• /
• pp.11-14
• /
• 2009

We investigated the I-V curves and differential tunneling conductance of two, CoFeB/MgO/CoFeB-based, magnetic tunnel junctions (MTJs): one with a low tunneling magnetoresistance (TMR; 22%) and the other with a high TMR (352%). This huge TMR difference was achieved by different MgO sputter conditions rather than by different annealing or deposition temperature. In addition to the TMR difference, the junction resistances were much higher in the low-TMR MTJ than in the high-TMR MTJ. The low-TMR MTJ showed a clear parabolic behavior in the dI/dV-V curve. This high resistance and parabolic behavior were well explained by the Simmons' simple barrier model. However, the tunneling properties of the high-TMR MTJ could not be explained by this model. The characteristic tunneling properties of the high-TMR MTJ were a relatively low junction resistance, a linear relation in the I-V curve, and conduction dips in the differential tunneling conductance. We explained these features by applying the coherent tunneling model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2B
• /
• pp.99-108
• /
• 2011

In this study a hybrid design scheme for the purpose of designing infiltration-based retentions and a detention is applied to reproduce urban hydrologic regime to natural hydrologic regime. The proposed method is based on the NRCS-CN stormwater estimation technique, and applied to determine the size for stormwater control facilities on the Oncheon stream as an example. Urban area, corresponding to less than 70 m height of the Oncheon stream basin area is targeted. The results indicate that the proposed scheme is very useful to reproduce its undeveloped flow-duration curve.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.4
• /
• pp.382-389
• /
• 1997

We present the results on the applicability of the polycrystalline AIN thin films for a surface acoustic wave filter operating at 800 MHz frequency. The films show the FWHM of 3 .deg. from th X-ray rocking curve, which indicates that the c-axis of the films is pre- ferentially oriented along the growth direction. The fabricated band pass filters exhibit the center frequency of 865 MHz with 3dB band-width of 45 MHz. From the measured frequency response, the electro-mechanical coupling constant of 0.8% and the SAW velocity of 5,709 m/s are obtained. Thus, we conclude that the sputtered AIN films are feasible for the fabrication of uper UHF band SAW filters.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.35-40
• /
• 2004

In order to understand alloying effects on the corrosion resistance of Ti-(10$\sim$20)%Zr-(2$\sim$8%)Nb-0.2%Pd alloys, Polarization curves were measured at 5%HCI solution. The results were interpreted in terms of two parameters obtained by the molecular orbital calculation ; one is the bond order($B_{\circ}$) and the other is the metal d-orbital level($M_{d}$). $B_{\circ}$ is a measure of the strength of covalent bonds between titanium and alloying elements. $M_{d}$ is correlative with the electronegativity of elements. It was found that increasing of Zr and Nb with higher $B_{\circ}$ values showed a lower critical anodic current density in the polarization curve and hence higher corrosion resistance. On the other hand, increasing of Zr and Nb with higher $M_{d}$ values showed a higher corrosion resistance.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.1
• /
• pp.19-31
• /
• 1996

We have analyzed collected photoelectric light curves for light variations of SW Lac. The method of Fourier analysis was adopted to quantify the light variation from season to season. We found the linear relation between the Fourier coefficient, B1 and the magnitude difference between two maxima. The total light of the system has been decreased as much as 0m.04 during approxiamately 20 years time interval. Photoelectric parameters including spot parameters for all light curves were obtained by the method of the Wilson and Devinney differential correction in order to secure the variations of parameters from season to season. SW Lac, not like RS CVn type stars, required to adjust all parameters as well as spot parameters for a reasonable fit to the observations of each epoch. A surface temperature of cooler star is one of the most sensitive parameters to affect a shape of light curve of SW Lac. We conclude that the shape of light curve of SW Lac varies even during one season as well as season to season. The light curve is mainly caused by inhomogeneous surface temperature due to strong chromospheric activity of the system.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.127-133
• /
• 2007

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the unloading compliance method according to the ASTM E813-97 and E1152-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_{IC}$. It is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases a phenomenon of the tunneling and shear lip by the side groove.