• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.408-415
• /
• 2008

The characteristics of a ferroelectric-domain inverted grating fabricated by applying a high-voltage pulse at room temperature in Ti-diffused channel waveguides in z-cut $LiNbO_3$ (Ti:PPLN) were examined for channel waveguide quasi phase-matched secondharmonic generation devices. The fabrication conditions of uniform periodic domain-inversion were examined. Ti:PPLN with period ${\Lambda}=16.6{\mu}m$ for SHG were fabricated and the performances were measured. A normalized SHG efficiency as high as 473 (%/W) was obtained with 49 mm interaction length.

• 전자공학회논문지 IE
• /
• v.47 no.3
• /
• pp.47-52
• /
• 2010

In this paper, a frequency tripler has been designed with 100mW medium-power using P-HEMT. It is designed to obtain 7.2GHz frequency at the output that is an integer multiple of 2.4GHz input frequency by using nonlinear device that produces 3rd harmonic. The frequency tripler is designed by using load-pull simulation. To suppress the 2nd and fundamental, notch filter is used for the frequency tripler. The tripler is designed to obtain about 21dBm output power with 15dBm input, i.e., 6dB conversion gain and the suppression of 20dBc at fundamental, and 30dBc at the second harmonics.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.24-24
• /
• 2022

토양 수분은 육상 생태계를 지배하는 핵심 변수로 널리 간주되어 왔다. 따라서 토양 수분을 모니터링하고 추정하는 것은 수문, 농업, 생화학적, 및 기후 역학을 평가하는 데 필수적이다. 그러나 최대 토양 접촉을 요구하는 기존의 토양 수분 모니터링 방법은, 토양 교란을 최소화하여 토양의 고유 특성을 보전하지 못하는 한계가 있다. 이 문제를 극복하기 위해 본 연구에서는 비접촉 초음파 시스템을 이용하여 토양 수분을 평가 방법을 개발하였다. 이 시스템은 공기-토양 조인트 절반 공간에서 누설 레일리파(Rayleigh wave)를 측정하도록 설계되었다. 토양 수분의 변화에 대한 누설 레일리파의 측정은 통제된 실험 설계에서 모래, 실트, 점토와 같은 세 가지 토양 유형에서 평가하였다. 본 연구 결과에서 세 가지 토양 사례 모두, 누설 레일리파의 에너지와 토양 수분 사이에 밀접한 관계가 있음을 보였다. 그러나 모래에서 얻은 동적 매개변수의 특성은 실트 및 점토의 특성과 다른 형태를 보였다. 이러한 결과는 미세한 토양 입자와 대조적으로 굵은 토양 입자는 증발 과정에서 감소된 토양 강도로 설명될 수 있다. 관측된 누설 레일리파에서 얻은 동적 매개변수를 기반으로 토양 수분을 평가하기 위해 랜덤 포레스트 모형을 이용하였다. 예측된 토양 수분의 정확도는 모든 데이터 및 토양 유형에 관계없이 높은 정확도를 보였다(R² ≥ 0.98, RMSE ≤ 0.0089 m³ m^-3). 즉, 본 연구에서는 레일리파가 토양 교란 없이 토양 수분 변화를 지속적으로 평가할 수 있는 큰 잠재력을 가지고 있음을 보여주었다.

• 한국해양학회지
• /
• v.13 no.1
• /
• pp.1-8
• /
• 1978

A seismic reflection Survey was carried out in the offshere area between Geoje Island and Namhae Island, utilizing the echosounder with the frequency 28KHz and thd Uniboom with the filter band 800∼2000Hz. The results show the submarine topography, sedimentary layer structure and the depth distribution of the base rock. The water depth of the sea in the survey area is less than 80m; up to 40m contour line the sea bottom surface has a slight dip(about 1/1000), while in the zone deeper than 40m the bottom topography has a irregular relief. The thickness of the whole sedimentary deposit is about 20∼70m and divided into 3 layers: Upper layer(A layer) with horizontal laminae, intermediate layer(B layer) with cross-bedding and groove structure, and lower layer(C layer) not showing any sedimentary structure on the seismic reflection profile. The surface of the base rock is deeper gradually in the south-eastern part of the survey area and extends to 140m depth. The vertical sediments sequences, composed of B layer and A layer, show the type of transgressive sequences. It is interpreted that B layer was formed at one period when the sea level was lower 40∼60 than the present and ince then, following the rising of the sea level, A layer was deposited.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.281-281
• /
• 2017

하천에서 하도불안정(stream instability)으로 인하여 하상의 형태가 변화하고 하상파(sand wave)가 발생한다. 사련(ripple), 사구(dune) 등과 같은 하상파는 흐름저항을 유발하여 홍수시 수위를 증가시킨다. 수리실험 및 수치모형을 이용하여 사련 및 사구의 발달과정 그리고 이를 지나는 난류흐름에 대한 연구가 국외에서는 이루어지고 있지만 국내의 경우 거의 찾아보기 힘들다. 수치모형을 활용한 연구는 주로 횡방향으로 하상파가 일정하다는 가정하에 연직 2차원 수치모형을 적용하였으나 최근 컴퓨터 기술 및 수치기법의 고도화로 3차원 RANS(Reynolds averaged Navier-Stokes) 또는 LES(Large eddy simulation)를 이용한 수치모형이 개발되고 있다. 본 연구에서는 LES에 유사이송 및 하상변동 모형과 결합하여 사구발달에 대한 수치모의를 수행하였다. LES와 유사이송 및 하상변동 모형의 결합은 순간유속성분을 하상변동모형에 직접 적용되기 때문에 난류영향을 고려할 수 있는 것이 장점이다. 특히 사구의 발달에 따라 복잡한 흐름이 발생하며 3차원 와구조가 발생하므로 난류특성의 고려는 필수적이다. 수치모의는 Delft Hydraulics (Bakker et al., 1986)에서 수행한 수리실험 T39를 활용하였다. 수리실험은 길이 100 m, 폭 0.5 m 개수로에서 수행되었으며 평균유속은 0.611 m/s, 수심은 0.436 m이다. 하상파 실험에 사용된 유사입경은 0.78 mm 균일사를 사용하였다. 수치모의 조건은 수리실험과 동일하게 하였으나 계산시간의 효율을 고려하여 흐름방향의 계산영역은 4.0 m로 하고 주기경계조건(periodic boundary condition)을 부여하여 계산을 수행하였다. 수치모의 계산은 사구의 길이 및 파고가 평형상태에 이를 때까지 수행되었다. 수치모의 통해 사구발달에 따른 흐름 및 하상변동 특성을 분석하였다.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.78-84
• /
• 2008

Recent earthquakes near nuclear power plants in Korea have triggered public concerns about possible seismicity of the Ulsan Fault Zone in the south-eastern part of the Korean peninsula. To reveal subsurface structures of this fault zone, we conducted high-resolution seismic refraction and reflection surveys, and closely spaced gravity measurements in the Dongchon River valley north of Ulsan, Korea. Here alluvium covers the north-south trending fault zone in a 1-km wide valley. Both source points and receivers were spaced at 5-m intervals for the 24-channel seismic refraction and reflection methods, along two profiles of 835 m and 415 m length. Gravity data were also measured along these profiles at 131 stations using a 10-m interval. Synergetic interpretation of seismic refraction, high-resolution seismic reflection, and gravity surveys across the valley indicates that the Ulsan Fault Zone was formed by apparent north-south strike-slip motions during the Cretaceous, and that some faults may have been reactivated by east-west compressional or transpressional stresses during the Tertiary or Quaternary.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.5
• /
• pp.570-588
• /
• 2022

We scrutinized the acoustic outputs from the 70 shock wave generators of the 15 product models whose technical documents were available, among the 46 ballistic extracorporeal shock wave therapeutic devices of 11 domestic and 6 foreign manufacturers, approved by the Minster of Food & Drug Safety (Rep. Korea). We found that the acoustic Energy Flux Density (EFD), the most popular exposure parameter, was different by up to 563.64 times among shock wave generators at their minimum output settings and by up to 74.62 times at their maximum settings. In the same product model, the EFD was shown to vary depending on shock wave transmitters by up to 81.82 times at its minimum output setting and by up to 46.15 times at its maximum setting. The lowest EFD 0.013 mJ/mm² at the maximum output settings was much lower (2.1 %) than the maximum value 0.62 mJ/mm² at the minimum settings. The Large acoustic output differences (tens to hundreds of times)from the therapeutic devices approved for the same clinical indications imply that their therapeutic efficacy & safety may not be assured. The findings suggest the regulatory authority to revise her guideline to give clearer criteria for clinical approval and equality in performance, and recommend the authority to initiate a post-approval surveillance as well as a test in conformance between the data in technical documents and the real acoustic outputs clinically used.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.48-64
• /
• 1999

For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsurface velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etc. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data quality Geophone spacing of 3 to 5m is recommended in the land slope area for house land development and 5 to 10m in the tunnel site. In refraction tomography technique, the number of source points should be more than a half of available channel number of instrument, which can make topographic effect ignorable. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700${\~}$1,200m/s, soft rock 1,200${\~}$1,800m/s. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss. In case of tunnel site, it is recommended in tunnel design and construction to consider that tunnel is in contact with soft rock layer where three lineaments intersecting each other are recognized from the results of the other survey.

• Journal of the Korean Geophysical Society
• /
• v.5 no.1
• /
• pp.41-50
• /
• 2002

In order to delineate distribution of the basement in the vicinity of a Quaternary fault outcrop near the Gamsansa temple in Gyeongju, we conducted a seismic refraction survey along a 188 m profile with a 4 m receiver interval. Through tomographic inversion, we define four layers with refraction velocities of approximately 350 m/s, 600 m/s, 1,100 m/s and 2,400 m/s, respectively. We depict a reversed fault at a location of 40 m apart from the base station of the profile and interpret a fracture zone related to fault movements in the NNW of the profile.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.436-438
• /
• 2001

국내 BT급전방식의 고조파 문제를 해결하기 위하여 급전말단에 RC 필터를 설치하는 고조파저감장치를 설계 제작하여 그 고조파 저감특성을 실험적으로 입증하였다.