• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.113-122
• /
• 1998

The requisite numbers of sample replicates for the population study of soft-bottom benthos were estimated from survey data on the Songdo tidal flat and subtidal zone in Youngil Bay, Korea. Large numbers of samples were taken; two-hundred-fifty 0.02 m$^2$ box corers and fifty 0.1m$^2$ van Veen grabs were taken on the Songdo tidal flat and in Youngil Bay, respectively. The effect of sampler size on sampling efforts was investigated by pooling the unit samples in pairs, fours, eights, etc. The requisite number of sample replicates (n$_r$) was determined by sample variance (s$^2$) and mean (m) function (n$_r$:s$^2$/P$^2$m$^2$), at P=0.2 level, in which s$^2$ and m were calculated from the counts of individuals collected. For example, seven samples of 0.02 m$^2$ corer for the intertidal and two samples of 0.1 m$^2$ van Veen grab for subtidal fauna were required to estimate the total density of community. The smaller sampler size was more efficient than larger ones when sampling costs were compared on the basis of the total sampling area. The requisite number of sample replicates was also predicted ($\^{n}$n$_r$) by substituting $\^{s}$$^2$ obtained from the regression of s$^2$ against m using the Taylor's power law ($\^{s}$$^2$:am$^b$). The regression line of survey data on s$^2$ and m plotted on log scale was well fitted to the Taylor's power law (r$^2$${\geq}$0.95, p<;0.001) over the whole range of m. The exponent b was, however, varied when it was estimated from m which was categorized into classes by its scale. The fitted exponent b was large when both density class and the sampler size were large. The number of sample replicates, therefore, could be more significantly estimated, if regression coefficients (a and b) would be calculated from sample variance and mean categorized into density classes.

• Korean Journal of Microbiology
• /
• v.8 no.1
• /
• pp.41-51
• /
• 1970

In previous paper, it was reported that antibiotic substance such as tetracycline and streptomycin were produced by S'. albus subsp. and S'. globosus. And increase of mycelial growth of two strains, antibiotic production, and changes of pH range are extended to approximately 110-130 hrs in fermenting medium, there-after they decreased with culture period exception of pH range. Two Streptomyces spp. required commonly 4-5% starch as carbon sources and 1.5-2.0% soybean meal as nitrogen sources. However, 0.005-0.01M potassium phosphate dibasic, calcium carbonate (6mg/ml in S.albus subsp. and 2mg/ml in S. globosus), 0.01-0.03M, magnesium sulgate and 0.01M ferric chloride showed as optimal concentration for the growth of 2 strains. Mineral compoments such as zinc, manganese, cobalt, sodium and copper at the level of 10$^{-4}$ -10$^{-6}$ M were observed. Especially, zinc ion showed toxicity to the growth of 2 strains at 0.005M. In relation with pH, there is a little difference in mycelial growth with cultural initial pH.

• Bulletin of the Korean Mathematical Society
• /
• v.35 no.4
• /
• pp.809-817
• /
• 1998

We investigate when the product of two smooth manifolds admits a weakly Lagrangian embedding. Prove that, if $M^m$ and $N^n$ are smooth manifolds such that M admits a weakly Lagrangian embedding into ${\mathbb}C^m$ whose normal bundle has a nowhere vanishing section and N admits a weakly Lagrangian immersion into ${\mathbb}C^n$, then $M \times N$ admits a weakly Lagrangian embedding into ${\mathbb}C^{m+n}$. As a corollary, we obtain that $S^m {\times} S^n$ admits a weakly Lagrangian embedding into ${\mathbb}C^{m+n}$ if n=1,3. We investigate the problem of whether $S^m{\times}S^n$ in general admits a weakly Lagrangian embedding into ${\mathbb} C^{m+n}$.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.933-943
• /
• 2020

Let M be a Fano manifold, and H^🟉(M; ℂ) be the quantum cohomology ring of M with the quantum product 🟉. For 𝜎 ∈ H^🟉(M; ℂ), denote by [𝜎] the quantum multiplication operator 𝜎🟉 on H^🟉(M; ℂ). It was conjectured several years ago [7,8] and has been proved for many Fano manifolds [1,2,10,14], including our cases, that the operator [c₁(M)] has a real valued eigenvalue 𝛿₀ which is maximal among eigenvalues of [c₁(M)]. Galkin's lower bound conjecture [6] states that for a Fano manifold M, 𝛿₀ ≥ dim M + 1, and the equality holds if and only if M is the projective space ℙⁿ. In this note, we show that Galkin's lower bound conjecture holds for Lagrangian and orthogonal Grassmannians, modulo some exceptions for the equality.

• Geophysics and Geophysical Exploration
• /
• v.17 no.1
• /
• pp.11-20
• /
• 2014

To reveal shear-wave velocities ($v_s$) and site characterization of Wonju, Korea, Rayleigh waves were recorded at 78 sites of lower altitude using 12 to 24 4.5-Hz vertical geophones for 20 days during the period of February to September 2013. Dispersion curves of the Rayleigh waves obtained by the extended spatial autocorrelation method were inverted using the damped least-squares method to derive $v_s$ models. From these 1-D models, the average $v_s$ to a depth of 30 m ($v_s30$), $v_s$ of weathered rocks, depths to these basement rocks, and average $v_s$ of the overburden layer were derived to be $16.3{\pm}0.7m$, $576{\pm}8m/s$, $290{\pm}7m/s$, and $418{\pm}13m/s$, respectively, in the 95% confidence range. To determine adequate proxies for $v_s30$, we computed correlation coefficients of $v_s30$ with topographic slope (r = 0.46) and elevation (r = 0.43). An empirical linear relationship is presented as a combination of individually estimated $v_s30$ with weighting factors of 0.45, 0.45, and 0.1 for topographic slope, elevation, and mapped lithology, respectively. Due to a weak correlation between $v_s30$ obtained from inversion of dispersion curves and the proxy-based estimation (r = 0.50), however, the relatively large error range should be considered for applications of this relationship.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.7
• /
• pp.1038-1042
• /
• 2006

A new type of DTPA-bis-amides (L1-L4) and their Gd(III)-complexes of the type $[Gd(L)(H_2O)]{\cdot}nH_2O$ (5: L1; 6: L2; 7: L3; 8: L4) have been prepared and characterized by analytical and spectroscopic techniques. The X-ray crystal structure of 8 has been determined for structural confirmation. The coordination geometry adopts a tricapped trigonal prism geometry with L4 acting as a chelate octadentate and a water molecule in the coordination sphere. Crystals are monoclinic, $P2_1$, a = 14.468(3), b = 19.235(4), c = 13.527(2) $\AA$ $\beta$ = $107.245(3)^{\circ}$, V = 3595.2(11) $\AA^3$, Z = 4, $D_{calc}$ = 1.570. Significant increases in relaxivities are observed with 6 and 7 as compared with that of $Omniscan^{(R)}$, a commercial MR agent: R1 = 12.46 $mM^{-1}\;s^{-1}$, R2 = 8.76 $mM^{-1}\;s^{-1}$ for 6; R1 = 12.77 nm-1 s-1, R2 = 7.60 mM-1 s-1 for 7; R1 = 4.9 $mM^{-1}\;s^{-1}$, R2 = 4.8 $mm^{-1}\;s^{-1}$ for $Omniscan^{(R)}$. In the case of 5, however, both R1 and R2 are found to be lower to show 2.09 $mM^{-1}\;s^{-1}$, and 1.82 $mM^{-1}\;s^{-1}$, respectively.

• Journal of Korean Society of Transportation
• /
• v.27 no.6
• /
• pp.69-77
• /
• 2009

The maximum and mean acceleration rates of vehicles estimated from the stopping conditions at signalized intersections provided an important clue to analyze traffic accident investigation when there was a dispute about legal liability such as first entering vehicle at the intersection, etc. This paper provided the maximum and mean acceleration rates of vehicles reflecting current traffic conditions in Korea through field studies. The mean acceleration rates of vehicles at stopline were measured up to 50m at the intervals of 5m. Results showed that the mean acceleration rate for bus was found to be $1.011^m/s^2{\sim}1.314^m/s^2$(0.1g~0.13g), and for passenger car was $1.548^m/s^2{\sim}1.818^m/s^2$(0.16g~0.19g). Statistical test results indicated that the observed differences from vehicle types and vehicle positions were statistically significant for the all ranges tested. It is expected that the accuracy of accident investigation practice will be improved by applying the acceleration rate values presented in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1369-1375
• /
• 2012

One of important problems in the theory of sequences is to determine the values and number of occurrences of each value taken on by the cross-correlation. In this paper, we find the values and the number of occurrences of each value of cross-correlation between an m-sequence u(t) of period $2^n-1$ and its decimation $u(dt)(0{\leq}t{\leq}2^n-2)$ where n=2m, 2s|m and $d=(2^{2m}+2^{2s+1}-2^{m+s+1}-1)/(2^s-1)$. Also we show that a family of decimations leads to a four-valued cross-correlation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.1
• /
• pp.51-59
• /
• 2004

The effectiveness of one dimensional critical velocity method for evacuation environment at 10MW fire size in a railroad tunnel have been investigated in this paper by three dimensional CFD method. It was performed to evaluate the evacuation environment in terms of temperature distribution, visible distance distribution and CO concentration at some tunnel inlet velocity, 1m/s, 2m/s (near critical velocity), and 3m/s. At all inlet velocity, passenger should give away downward the flow direction because the inlet velocity can not afford to sufficient evacuation environment for passengers. In case of 3m/s inlet velocity, however, the evacuation environment for passengers is better than the other cases. To provide more safe evacuation environment on fire situation, tunnel inlet velocity should be larger than critical velocity.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.2
• /
• pp.231-253
• /
• 2016

The purpose of this study is two fold. First, we will explore the meaning, spread effect and consideration factors of manufacturing innovation in terms of theoretical perspective. Second, we will verify the status of high performance computing (HPC) utilization policy, and analyze the situation of US and Korea. Manufacturing innovation policy in each country has the objective in common which aims epoch-making enhancing of productivity. Nevertheless it can be characterized as innovation oriented policy rather than simple trial of productivity improvement. For long term growth and employment, the need for reindustrialization instead of deindustrialization should be recognized. Employment may be decreased temporarily and partially due to manufacturing innovation. However net effect of employment increasing will be bigger because of indirect employment. HPC utilization policy has the importance as a separate movement other than as a subset of manufacturing innovation. US government is trying to eliminate the bottleneck elements in adoption of HPC based M&S activity, and to promote the way of problem solving through the mechanism of public-private partnership, in spite of low level of HPC based M&S. In Korea, ecosystem related with the activity of HPC based M&S is needed, and expansion of M&S utilization in manufacturing companies and fostering of M&S supporting institutions will be important for this task.