• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.98-107
• /
• 1993

This paper describes a design of a multi-bit oversampling noise-shaping D/A converter which achieves a resolution of 12 bits using oversampling technique. In the architecture the essential block which determines the whole accuracy is the analog internal D/A converter, and the designed charge-integration internal D/A converter adopts a differential structure in order to minimize the reduction of the resolution due to process variation. As the proposed circuit is driven by signal clocks which contains the information of the data variation from the noise-shaping coder, it minimizes the disadvantage of a charge-integration circuit in the time axis. In order to verify the circuit, it was integrated with the active area of 950$\times$650${\mu}m^{2}$ in a double metal 1.5-$\mu$m CMOS process, and testified that it can achieve a S/N ratio of 75 dB and a S/(N+D) ratio of 60 dB for the signal bandwidth of 9.6 kHz by the measurement with a spectrum analyzer.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.94.2-94.2
• /
• 2003

CJ-11668 is a new potent and selective COX-2 inhibitor. CJ-11668 showed COX-2 inhibition (IC50) of 65nM and selectivity ratio (COX-l/COX-2) of 770 in the cell based assay. In the human whole blood assay, CJ-11668 showed COX-2 inhibition (IC50) of 370nM and selectivity ratio (COX-l/COX-2), 135. The treatment of CJ-11668 (5 mg/kg, p.o) produced a significant inhibition (35%) of inflamed rat paw volume in the carrageenan-induced acute inflammation. CJ-11668 also suppressed the PGE2 level (69% inhibition, 1 mg/kg, p.o) in the zymosan-induced mouse air pouch model after 3 hrs. (omitted)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1050-1053
• /
• 2002

This paper presents metal structure that is fabricated using UV-LIGA process with PMER N-CA3000. In order to fabricate metal structure with high aspect ratio, the systematic optimization method was adopted and then the structure of $36{\mu}m$ thick mold with aspect ratio 7:1 (trench) and $32{\mu}m$ thick nickel structure was obtained. This structure is applied to the fabrication of optical switch.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.895-903
• /
• 2021

Objective: The objective of this study was to investigate the effects of various dietary unsaturated to saturated fatty acids ratios (UFA to SFA ratios) on growth performance, carcass traits, blood lipid parameters, tissue fatty acid (FA) composition, and meat quality of finishing pigs. Methods: A total of 45 crossbred pigs ([Duroc×Landrace]×Yorkshire), with an average initial body weight of 60.3±2.4 kg, were randomly allocated to three treatment groups of 1:1, 2:1, and 3:1 dietary UFA to SFA ratios. Results: Both average daily gain and average daily feed intake of pigs were decreased linearly (p<0.05), whereas backfat thickness was decreased linearly (p<0.05) with increasing of dietary UFA to SFA ratio. Serum triglyceride and low density lipoprotein cholesterol were decreased quadratically or linearly (p<0.05) respectively, whereas high density lipoprotein cholesterol was increased quadratically (p<0.05) with increasing dietary UFA to SFA ratio. In M. longissimus thoracis, the proportion of C18:1 and monounsaturated FA was decreased linearly (p<0.05), whereas the proportion of C18:2n-6, C20:4n-6 and polyunsaturated FA (PUFA) were increased linearly (p<0.05) as dietary UFA to SFA ratio increased. In the subcutaneous adipose tissue, the proportion of SFA was decreased linearly (p<0.05), whereas the proportion of n-6 PUFA, n-3 PUFA, and the UFA to SFA ratios were increased linearly (p<0.05) with increasing of dietary UFA to SFA ratio. Meat color scores and shear force of pigs were decreased linearly (p<0.05), whereas drip loss and cooking loss were increased linearly (p<0.05) with increasing of dietary UFA to SFA ratio. Conclusion: Appropriately boosted dietary UFA to SFA ratio could be conductive to optimize blood lipid parameters and tissue FA composition. However, when the ratio is too high or too low it tends to have negative effects on growth performance and meat quality.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.706-712
• /
• 1997

AlN(Aluminium Nitride) thin films were prepared using by RF sputtering method on the Si(100) and Si(111) substrates as the parameters of the substrate temperature, RF power, sputtering duration and the $N_2$/Ar ratio and investigated by X-ray diffraction, IR spectrometry, n&k analyzer. For the Si(100) substrate, the AlN thin films of (101) orientation were obtained under the conditions of room temperature and the nitrogen of 60 vol.%. For the Si(111) substrate, the (002) AlN thin films were obtained under the nitrogen of 100 vol.%. In case of the thin film prepared in the condition of above 60 vol.% of the nitrogen, the average value of the surface roughness of the film was 151$\AA$. From the changes of the half widths of E$_1$[TO] phonon bands at the wavenumber of 680$cm^{-1}$ /, it were compared of the crystallinities of the films which were grown under the different conditions. The thicknesses of AlN films were decreased dramatically in the region of the nitrogen of 40~60 vol.%. Its due to the nitridation of the Al target surface and getting low of the sputtering yield by the $N_2$/Ar ratio being increased.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2008-2010
• /
• 2002

Process conditions of a novel negative thick photoresist, JSR THB-$430N^{(R)}$, are established in this paper. Although SU-8 obtains uniform and high-aspect-ratio structures, it is hard to remove the SU-8 mold after electroplating. The JSR THB-$430N^{(R)}$ can be more easily removed than the SU-8 and has a low internal stress. Introducing two step strip processes using acetone and the jSR THB-$S1^{(R)}$, the JSR THB-$430N^{(R)}$ electroplating mold was removed completely and a JSR THB-$430N^{(R)}$ film stress is compressive less than 2 MPa. In this paper, we obatined $200{\mu}m$ thick PR structure and $100{\mu}m$ thick electroplated nickel structure using the JSR THB-$430N^{(R)}$ photoresist.

• Steel and Composite Structures
• /
• v.14 no.6
• /
• pp.587-604
• /
• 2013

There are few technical documents regulated structural performance and engineering criteria in domestic market for Structural insulated panels in Korea. This paper was focused to identify fundamental performance under monotonic loading and cyclic loading for SIPs in shear wall application. Load-displacement responses of total twelve test specimens were recorded based on shear stiffness, strength, ultimate load and displacement. Finally energy dissipation of each specimen was analyzed respectively. Monotonic test results showed that ultimate load was 44.3 kN, allowable shear load was 6.1 kN/m, shear stiffness was 1.2 MN/m, and ductility ratio was 3.6. Cyclic test was conducted by two kinds of specimens: single panel and double panels. Cyclic loading results, which were equivalent to monotonic loading results, showed that ultimate load was 45.4 kN, allowable shear load was 6.3 kN/m. Furthermore the accumulated energy dissipation capability for double panels was as 2.3 times as that for single panel. Based on results of structural performance test, it was recommended that the allowable shear load for panels should be 6.1 kN/m at least.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.222-229
• /
• 2006

The treatment performance and operational parameters of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. In Filter 2, denitrification was accomplished under LV of 50~168 m/d in a 1 m filter-bed. However, the denitrification capacity reached the maximum when the linear velocity was increased to 202 m/d. Relationship between increase in microorganism and headloss was clearer in Filter 2. As a result, the denitrification rate increased from 1.0~2.3 kgN/($m^3-filter-bed{\cdot}d$) as the headloss increased. The COD removal rate was 6.0~9.6 kgCOD/($m^3-filter-bed{\cdot}d$) when operated with Filters 1 and 2. These results mean that captured bacteria contributed a part of COD consumption and denitrification. The maximum nitrification and denitrification rate was 0.5 and 4 kgN/($m^3-filter-bed{\cdot}d$) in Filter 1 and 2.The ratio of backwashing water to the treated water was about 5~10 %. In Filter 1, wasted sludge in backwashing was only 0.7~5.3 gSS/($m^3$-treated water). In Filter 2, added methanol was converted into sludge and its value was 8.0~24 gSS/($m^3$-treated water). These results proved that this process is both convenient to install as tertiary treatment and cost effective to build and operate.

• Journal of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.240-248
• /
• 1991

The regioselectivity in the nitrosation of seven N-methyl-N'-substituted phenylureas ($CH_3NHCONHC_6H_4-G$; G = H, p-CH$_3$, m-CH$_3$, m-CH$_3$O, p-F, m-F, m-Br) was examined using NaNO$_2$ and 4 different acids (diluted HCl, HCOOH, CH$_3$COOH, CF$_3$COOH). In all cases, the two regioisomeric products, N-nitroso-N-methyl-N'-substituted phenylureas (A) and N'-nitroso-N-methyl-N'-substituted phenylureas (B) were observed to be formed as major products and product ratios were determined by the integration of their methyl peaks in $^1$H-NMR. Electron donating substitutent(G) on phenyl of the ureas generally led to increase the ratio of B to A. The data have revealed that the relative sensitivity of the nitrosonium species (HONO, HCOONO, CH$_3$COONO, CF$_3$COONO) toward the change of electron density on nitrogen with phenyl substitutents are 1.00 : 0.93 : 0.78 : > ∼ 0.7.

• Journal of applied mathematics & informatics
• /
• v.3 no.1
• /
• pp.101-115
• /
• 1996

In this paper we extend the best choice of subsample size m in the 2-stage sampling which suggested by Mohammad(1986) to the 3-stage sampling in cases of known and of unknown cost and variance ratio. We find the subsample size m.k which ensures more than the relative efficiency 90% Also we see that the choice of 3-stage subsample size depends on the design parameters using in 2-stage sampling.