• 전자공학회논문지 IE
• /
• v.46 no.1
• /
• pp.31-36
• /
• 2009

This study was to simulate it that the sending receiving vehicles run on the general national roads with the one-way two-lanes at 80[km/h] speed. This study was to select 280[m] radius of curvature based on the statistical data with high rate of traffic accidents, 140[m] length of direct roads considering the stopping stadia, 90[m] length of curve, and 8 points of curved roads at 11.25[m] intervals. As a result above, when the distance between the sending and receiving vehicles became more than 111[m], the propagation path of reflected wave by the adjacent vehicles became longer than the propagation path of reflected wave by the left/right reflectors because the number of repeated reflection increased. In this study, the repeated reflection for the propagation's reach to the receiving vehicles was about $1{\sim}2$[times] as it supposed it less than 111[m]. Accordingly, it found out that the propagation path of reflected wave received through the left/right reflectors was about $1{\sim}1.5[m]$ larger than the reflected wave produced by the adjacent vehicles regardless of lanes on which the sending and receiving vehicles were located.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.1
• /
• pp.3-12
• /
• 2005

The behaviors of the ground in crossed zone and the existing upper tunnel in shallow cover due to the excavation of new lower tunnel Rectangularly crossed to that was studied. Model tests were performed in the large scale test pit, the size was '$4.0m(width){\times}3.8m(height){\times}4.1m(length)$'. Test ground was constructed uniformly by sand in middle density. Results of the model tests show that earth pressure and settlement of the ground in crossed zone were redistributed due to the longitudinal arching effect by the excavation of lower tunnel. Upper tunnel blocks stress flow due to the longitudinal arching effect by excavation of lower tunnel.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.587-601
• /
• 2020

The ocean circulation was simulated in the East Sea and Ulleungdo-Dokdo region using ROMS (Regional Ocean Modeling System) model. By adopting the East Sea 3 km model and the HYCOM 9 km data, Ulleungdo 1 km model and Ulleungdo-Dokdo 300 m model were constructed with one-way grid nesting method. During the model development, a correction method was proposed for the distortion of the open boundary data which may be caused by the bathymetry data difference between the mother and child models and the interpolation/extrapolation method. Using this model, a super-high resolution ocean circulation with a horizontal resolution of 300 m near the Ulleungdo and Dokdo region was simulated for year 2018. In spite of applying the same conditions except for the initial and boundary data, the numerical models result indicated significantly different characteristics in the study area. Therefore, these results were compared and verified by using the surface current data estimated by satellites altimeter data and temperature data from NIFS (National Institute of Fisheries Science). They suggest that in general, the improvement of the one-way grid nesting with the HYCOM data on RMSE, Mean Bias, Pattern correlation and Vector correlation is greater in 300 m model than in the 1 km model. However, the nesting results of using East Sea 3 km model showed that simulations of the 1 km model were better than 300 m model. The models better resolved distinct ridge/trough structures of isotherms in the vertical sections of water temperature when using the higher horizontal resolution. Furthermore, Karman vortex street was simulated in Ulleungdo-Dokdo 300 m model due to the terrain effect of th islands that was not shown in the Ulleungdo 1 km model.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1135-1140
• /
• 2007

Pseudo-first-order rate constants (kobs) for the reaction of N-benzylphthalimide (NBPT) with HO- have been determined at 2.0 × 10?4 M NBPT, 1.0 × 10?3 and 2.0 × 10?3 M NaOH as well as varying concentrations of cetyltrimethylammonium bromide ([CTABr]T = 0.0-1.7 × 10?1 M). The effects of [CTABr]T ? CMC (with CMC representing the critical micelle concentration of CTABr) on kobs have been analyzed in terms of Berezin's pseudophase (BPP) model and pseudophase ion-exchange (PIE) model. Although both models give the best observed data fit with least-squares values not significantly different from each other, the calculated values of KS from BPP model appear to be more reliable compared to those from PIE model because the values of KS from BPP model are similar to the corresponding KS values determined spectrophotometrically.

• Clinical and Experimental Pediatrics
• /
• v.56 no.3
• /
• pp.116-124
• /
• 2013

Purpose: Tumor necrosis factor (TNF)-${\alpha}$ is thought to contribute to pulmonary hypertension. We aimed to investigate the effect of infliximab (TNF-${\alpha}$ antagonist) treatment on pathologic findings and gene expression in a monocrotaline-induced pulmonary hypertension rat model. Methods: Six-week-old male Sprague-Dawley rats were allocated to 3 groups: control (C), single subcutaneous injection of normal saline (0.1 mL/kg); monocrotaline (M), single subcutaneous injection of monocrotaline (60 mg/kg); and monocrotaline + infliximab (M+I), single subcutaneous injection of monocrotaline plus single subcutaneous injection of infliximab (5 mg/kg). The rats were sacrificed after 1, 5, 7, 14, or 28 days. We examined changes in pathology and gene expression levels of TNF-${\alpha}$, endothelin-1 (ET-1), endothelin receptor A (ERA), endothelial nitric oxide synthase (eNOS), matrix metalloproteinase (MMP) 2, and tissue inhibitor of matrix metalloproteinase (TIMP). Results: The increase in medial wall thickness of the pulmonary arteriole in the M+I group was significantly lower than that in the M group on day 7 after infliximab treatment (P<0.05). The number of intraacinar muscular arteries in the M+I group was lower than that in the M group on days 14 and 28 (P<0.05). Expression levels of TNF-${\alpha}$, ET-1, ERA, and MMP2 were significantly lower in the M+I group than in the M group on day 5, whereas eNOS and TIMP expressions were late in the M group (day 28). Conclusion: Infliximab administration induced early changes in pathological findings and expression levels of TNF-${\alpha}$, and MMP2 in a monocrotaline-induced pulmonary hypertension rat model.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.2
• /
• pp.90-98
• /
• 1991

This study introduces a new structural model of 1M 2:1 trioctahedral clay minerals or, more generally, 2:1 trioctahedral phyllosilicates. The structural model requires only the chemical formulae of the clay minerals as an input and uses the regression relation (Radoslovich, 1962) to calculate the a- and b-dimensions of the phyllosilicates with the given chemical formulae. The atomic coordinates of the constituent atoms are geometrically calculated for C2/m space group under the assumption that the interatomic distances are constant. To determine the c-dimension, this study calculates the binding energies of 1M 2:1 trioctahedral phyllosilicates as a function of d(001) and find the minimum energy producing d(001). The structural model generates the cell dimensions, interaxial angles, interatomic distances, octahedral, tetrahedral and interlayer thickness, polyhedron deformation angles and atomic coordinates in the unit cell. The simulated structural parameters of phlogopite and annite are very close to the reported data by Hazen and Burnham (1973), suggesting that the structure simulation using only the chemical formule is successful, and thus, that the structural model of this study overcomes the difficulties in the previous models by other investigators.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.132-137
• /
• 2017

This paper proposes a transformation method of the zero moment point (ZMP) and the center of mass (CoM) from one walking pattern to other patterns by considering the structure of a robot or walking situations in real time. In general, a humanoid robot has own structure characteristics like height and mass. The structure characteristics make the given CoM/ZMP walking pattern of one human or one humanoid robot to be difficult to apply to other robot directly. For this purpose, we analyze the characteristics of walking patterns according to the step length, duration of walking support phase and the CoM height by using the cart-table model as the simple humanoid robot model. A transformation equation is derived from the analyzation and it is verified with simulation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.221-230
• /
• 1997

In hydrology analysis, the result of a slope analysis for terrain have an very important effect on water quality and water quantity Recently, a slope analysis tend to use the digital elevation model rater than the traditional map sheet. But a terrain slope analysis by the digital elevation model depends on grid size of the digital elevation model. Hence the effect of a slope analysis by the digital elevation model is a important factor. In this study, therefor, in order to determine a hydrological parameter and a terrain parameter for simulation of the water quality and the hydrological property, we adapted two sample area that are the Nerin stream of the basin of the Soyang lake and a Osip stream of Samchuk, and its individual coverages are $640\;km^2$ and $33\;km^2$. Also to analyze the effect of grid size in the slope of a basin, we apply DEM changing a grid size respectively at intervals of 100 m from 100 m to 1.000m for the Nerin stream basin and at intervals of 10 m from 20 m to 300 m for the Osip stream basin.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.67-76
• /
• 1988

A fully non-linear two-dimensional model for studying basic tidal dynamics within the Arabian Gulf has been formulated. The model extends to the east as far as continental shelf edge and has a mesh resolution of 1/12 degree latitude by 1/10 degree longitude. The developed model was used to investigate the distribution of dominant $M_2$, $S_2$, $K_1$, $O_1$ and $N_2$ tides adopting the open boundary tidal information from Schwiderski's global ocean tidal model. Computed co amplitude and cophase charts were presented independently and comparison between these charts and existing Admiralty tidal charts were made. Maximum bottom stress vector during the semidiurnal period due to $M_2$ and $M_4$ tides are also presented to suggest the possible direction of sediment movement in the region.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1542-1549
• /
• 2018

Objective: Because lactation periods in dairy cows lengthen with increasing total milk production, it is important to predict individual productivities after 305 days in milk (DIM) to determine the optimal lactation period. We therefore examined whether the random regression (RR) coefficient from 306 to 450 DIM (M2) can be predicted from those during the first 305 DIM (M1) by using a RR model. Methods: We analyzed test-day milk records from 85,690 Holstein cows in their first lactations and 131,727 cows in their later (second to fifth) lactations. Data in M1 and M2 were analyzed separately by using different single-trait RR animal models. We then performed a multiple regression analysis of the RR coefficients of M2 on those of M1 during the first and later lactations. Results: The first-order Legendre polynomials were practical covariates of RR for the milk yields of M2. All RR coefficients for the additive genetic (AG) effect and the intercept for the permanent environmental (PE) effect of M2 had moderate to strong correlations with the intercept for the AG effect of M1. The coefficients of determination for multiple regression of the combined intercepts for the AG and PE effects of M2 on the coefficients for the AG effect of M1 were moderate to high. The daily milk yields of M2 predicted by using the RR coefficients for the AG effect of M1 were highly correlated with those obtained by using the coefficients of M2. Conclusion: Milk production after 305 DIM can be predicted by using the RR coefficient estimates of the AG effect during the first 305 DIM.