• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.229-238
• /
• 1996

The electromigration phenomena and the characterizations of the conductor lifetime (Time-To-Failure, TTF) in Al-1%Si thin film interconnections under D.C. and Pulsed D.C. conditions were investigated . Meander type test patterns were fabricated with the dimensions of 21080$mu \textrm{m}$ length, 3$\mu\textrm{m}$ width, 0.7$\mu\textrm{m}$ thickness and the 0.1$\mu\textrm{m}$/0.8$\mu\textrm{m}$($SiO_2$/PSG)dielectric overlayer. The current densities of $2 \times10^6 A/\textrm{cm}^2$ and $1 \times10^7 A/\textrm{cm}^2$ were stressed in Al-1%Si thin film interconnection s under a D.C. condition. The peak current densities of $2 \times10^6 A/\textrm{cm}^2$ and $1 \times10^7 A/\textrm{cm}^2$ were also applied under a Pulsed D.C. condition at frequencies of 200KHz, 800KHz, 1MHz, and 4MHz with the duty factor of 0.5. THe time-to-failure under a Pulsed D.C.($TTF_{pulsed D.C}$) was appeared to be larger than that under a D.C. condition. It was found that the TTF under both a D.C. and a Pulsed D.C. condition. It was found that the TTF under both a D.C. and a Pulsed D.C. condition largely depends upon the appiled current densities respectively . This can be explained by a relaxation mechanism view due to a duty cycle under a Pulsed D.C. related to the wave on off. The relaxation phenomena during the pulsed off period result in the decayof excess vacancies generated in the Al-1%Si thin film interconnections because of the electrical and mechanical stress gradient . Hillocks and voids formed by an electromigration were observed by using a SEM (Scanning Electron Microscopy).

• Clean Technology
• /
• v.8 no.4
• /
• pp.199-203
• /
• 2002

To investigate the optimal conditions for biodegradation of toluene by Pseudomonas fluorescens KCTC 1767 in a batch soil-bioreactor, the effects of rpm change from 60 to 180, and temperature change from $15^{\circ}C$ to $30^{\circ}C$ in a batch culture and the flow rate change from 55 mL/min to 85 mL/Min in soil-bioreactor on the biodegradation of toluene were studied. In a batch culture the optimal operating conditons were 60 rpm, and $30^{\circ}C$ at initial pH 7, In a soil-bioreactor the optimal flow rate was 55 mL/min in the flow rate of circulation. The lower flow rate of circulation may help to biodegrade toluene adsorped in soil and dissolved in underground water.

• Genomics & Informatics
• /
• v.7 no.3
• /
• pp.152-158
• /
• 2009

Although the genetic basis for bone mineral density (BMD) has been studied by many groups so far, genes responsible for this complex trait has not been completely revealed. In order to localize quantitative trait loci (QTLs) for BMD variation in Asian population, the study was designed using a group of Mongolian population, a genetically closed population with a homogeneous lifestyle. BMD was measured at the left and right wrists and ankles using DEXA in 1,082 participants from 142 families. Genotyping of 13 polymorphic microsatellite markers on chromosome 13 (average spacing 8-9 cM) and two-point and multipoint linkage analysis were performed. In two-point linkage analysis, we identified two markers, D13S175 (6.03 cM) and D13S265 (68.73 cM) that had LOD scores greater than 1 for left ankle (LOD=2.09, LOD=1.49, respectively). We also found a marker D13S175 (6.03 cM) with a high LOD for left wrist (LOD=1.49) and the markers D13S265 (68.73 cM) and D13S217 (17.21 cM) for the right wrist (LOD= 1.82, LOD= 1.62, respectively). Among these significant marker regions, only two regions at 17 cM (13p11) and 65 cM (13q21) for the right wrist overlapped with major QTLs reported in following multipoint linkage analysis (LOD= 1.7549, LOD=1.4462, respectively). This study provides the possible evidence of the presence of QTLs affecting right wrist BMD in Mongolian populations on 13p11 and 13q21. Modest evidence was also found for genes affecting left ankle and left wrist BMD on 13p13.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.139-144
• /
• 2003

Nickel fine powders were prepared from nickel chloride aqueous solution containing ethanol as an organic solvent, and their oxidation behaviors were investigated. The reduction reaction by hydrazine from nickel chloride aqueous solution containing ethanol depend on reaction temperature. The reduction reaction time by hydrazine decreased with the increase of reaction temperature. By controlling reaction temperature, the products could be obtained spherical particles in the range of 0.1 $\mu\textrm{m}$~1.0 $\mu\textrm{m}$. Also, As reaction temperature increased from $40^{\circ}C$ to $80^{\circ}C$, the particle size slightly increased and had a broad size distribution owing to the presence of the coarse particles. The mean particle size and specific surface area of nickel powders prepared at $60^{\circ}C$ were 0.3 $\mu\textrm{m}$ and 31.8 $\m^2$/g, respectively. Weight loss of the powders at $300^{\circ}C$ was due to composition of $_Ni(OH)2$. In case of heat treatment at $200^{\circ}C$ in air, oxidation resistance of nickel powders was remarkable than that of as-synthesized.

• Transactions of Materials Processing
• /
• v.20 no.7
• /
• pp.473-478
• /
• 2011

In this study, the performance of a thermo siphon type radiator made of copper for LED lighting system was evaluated by using an inverse heat transfer method. Heating experiments and finite element heat transfer analysis were conducted for three different cases. The data obtained from experiments were compared with the analysis results. Based on the data obtained from experiments, the inverse heat transfer method was used in order to evaluate the heat transfer coefficient. First, the heat transfer analysis was conducted for non-vacuum state, without the refrigerant. The evaluated heat transfer coefficient on the radiator surface was 40W/$m^2^{\circ}C$. Second, the heat transfer analysis was conducted for non-vacuum state, with the refrigerant, resulting in the heat transfer coefficient of 95W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant. For the third case, the evaluated heat transfer coefficients were 140W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant. For the third case, the evaluated heat transfer coefficients were 140W/$m^2^{\circ}C$ for the radiator body, 5W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant for the rising position of radiator pipe, 35W/$m^2^{\circ}C$. Third, the heat transfer analysis was conducted for vacuum state, with refrigerant. For the highest position of radiator pipe, and 120W/$m^2^{\circ}C$ for the downturn position of radiator pipe. As a result of inverse heat transfer analysis, it was confirmed that the thermal performance of the current radiator was best in the case of the vacuum state using the refrigerant.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.99-104
• /
• 2009

This study is the basic design of a P-C-M support system for Agricultural Facilities. By utilizing this system, many users of Agricultural Facilities can easily obtain a large amount of information, ranging from procurement to maintenance. The procurement phase suppliesthe user with agricultural facilities information, economical analysis, and corporation information for procurement decisions. Furthermore, this phase shows the shape or format of the agricultural facilities, the main materials, as well as information on the cultivated crops. The construction phase shows information about agricultural facility-related laws, as well as standard drawings or a construction guide. The maintenance phase shows a guide of maintenance-related checklists. With the results of a basic design of a P-C-M Support System for Agricultural Facilities, the P-C-M support system menu tree is established.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.2
• /
• pp.157-164
• /
• 1999

To determine molecular mechanisms of Aquaporin-CD (AQP2) gene regulation, the promoter region of the AQP2 gene was examined by transiently transfecting a promoter-luciferase reporter fusion gene into mouse renal collecting duct cell lines such as mIMCD-3, mIMCD-K2, and M-1 cells, and NIH3T3 mouse embryo fibroblast cells. PCR-Southern analysis reveals that mIMCD-3 and mIMCD-K2 cells express AQP2, but M-1 and NIH3T3 cells do not, and that the treatment with cpt-cAMP $(400\;{\mu}M)$) or forskolin/isobutylmethylxanthine (IBMX) increased the AQP2 expression in IMCD cells. In both IMCD and NIH3T3 cells, the constructs containing the promoter of AQP2 gene showed promoter activities, indicating lack of tissue-specific element in the 1.4 kb 5'-flanking region of the mouse AQP2 gene. Luciferase activity in the IMCD cells transfected with the construct containing 5-flanking region showed responsiveness to cpt-cAMP, indicating that the 1.4 kb 5'-flanking region contains the element necessary for the regulatory mechanism by cAMP. The promoter-luciferase constructs which do not have a cAMP-responsible element (CRE) still showed the cAMP responsiveness in IMCD cells, but not in NIH3T3 cells. Increase in medium osmolarity did not affect AQP2 promoter activity in mIMCD-K2 cells. These results demonstrate that AQP2 gene transcription is increased with cAMP treatment through multiple motifs including CRE in the 5'-flanking region of the gene in vitro, and the regulatory mechanism may be important for in vivo regulation of AQP2 expression.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.176-181
• /
• 2003

Rapid densification of a SiC powder with additive 0.5 wt% $B_4$C was conducted by spark plasma sintering (SPS). The unique features of the process are the possibilities of using very fast heating rate and short holding time to obtain fully dense materials. The heating rate and applied pressure were kept to be $100^{\circ}C$/min and 40 MPa, while sintering temperature and soaking time varied to 1800, 1850, 1900 and $1950^{\circ}C$ and 10, 20 and 30 min, respectively. All of the SPS-sintered specimens at $1950^{\circ}C$ reached near-theoretical density. The XRD found that 3C-to-6H transformation at $1850^{\circ}C$. The microstructures of the rapidly densified SiC ceramics consisted of duplex microstructure with ultrafine equiaxed grains under 2 $\mu\textrm{m}$ and elongated grains of 0.5∼2 $\mu\textrm{m}$ wide, length 3∼10 $\mu\textrm{m}$. The biaxial strength increased with the increase of sintering time. Strength of 392.7 MPa was obtained with the fully densified specimen sintered at $1950^{\circ}C$ for 30 min, in agreement with the general tendency that strength increases with decreases pore. On the other hand, the fracture toughness shows the value of 2.17∼2.34 MPa$.$$m^{1/2}$ which might be due to the transgranular fracture mode.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.2
• /
• pp.100-107
• /
• 1997

It has been required to find flaws smaller than $100{\mu}m$ by fracture mechanic consideration. We prepared the infiltrated and sintered SiC structural ceramic specimens including artificial flaws, Fe, pore, WC, Si particles of size ranging from $36{\mu}m$ to $200{\mu}m$. We performed C-scan for the specimen using a high frequency and broad-band ultrasonic transducer to employ polyvinylidene fluoride(PVDF) and a broad-band electric scanning system. The flaws in the ceramic specimens were detected in the high frequency detection field up to 100MHz. But, the flaws were not detected in lower frequency detection field up to 60MHz. The ratio of the detected smallest flaw size to the wavelength calculated at the center frequency, 80MHz, was about 0.25 in Rayleigh scattering region.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.402-409
• /
• 2004

I performed the research about the drinking water treatment by precoat filtration and activated carbon adsorption process in the D water treatment plant at Gwangju. D water treatment plant inlet water is supplied from Juam lake in Jeollanamdo. The results are as follows; 1. Element disk used in this experiment are R(pore size $10{\mu}m$), B(pore size $20{\mu}m$). And diatomaceous earth are A(cake pore size $3.5{\mu}m$), B(cake pore size $7{\mu}m$) and C(cake pore size $17{\mu}m$) 2. Filtrate of precoat filter during 30 min are B-C 10.2 > BB 5.7 > R-A 5.4 ($m^3/m^2$). 3. The water quality through B-C+AC and R-A+AC are DOC 1.76 mg/1, 1.288 m/l respectively. 4. total THMs produced by chlorination are $84.2{\mu}g/l$(B-C+AC), $66.11{\mu}g/l$ (R-A+AC), $97{\mu}g/l$ (rapid sand filtration water) respectively. 5. The R-A+AC and B-C+AC process can be substitute of CWTS.