• The Journal of Advanced Prosthodontics
• /
• v.9 no.3
• /
• pp.176-181
• /
• 2017

PURPOSE. The purpose of this study was to evaluate the marginal and internal gaps of Ni-Cr and Co-Cr copings, fabricated using the dental ${\mu}-SLA$ system. MATERIALS AND METHODS. Ten study dies were made using a two-step silicone impression with a dental stone (type IV) from the master die of a tooth. Ni-Cr (NC group) and Co-Cr (CC group) alloy copings were designed using a dental scanner, CAD software, resin coping, and casting process. In addition, 10 Ni-Cr alloy copings were manufactured using the lost-wax technique (LW group). The marginal and internal gaps in the 3 groups were measured using a digital microscope ($160{\times}$) with the silicone replica technique, and the obtained data were analyzed using the non-parametric Kruskal-Wallis H test. Post-hoc comparisons were performed using Bonferroni-corrected Mann-Whitney U tests (${\alpha}=.05$). RESULTS. The mean (${\pm}$ standard deviation) values of the marginal, chamfer, axial wall, and occlusal gaps in the 3 groups were as follows: $81.5{\pm}73.8$, $98.1{\pm}76.1$, $87.1{\pm}44.8$, and $146.8{\pm}78.7{\mu}m$ in the LW group; $76.8{\pm}48.0$, $141.7{\pm}57.1$, $80.7{\pm}47.5$, and $194.69{\pm}63.8{\mu}m$ in the NC group; and $124.2{\pm}52.0$, $199.5{\pm}71.0$, $67.1{\pm}37.6$, and $244.5{\pm}58.9{\mu}m$ in the CC group. CONCLUSION. The marginal gap in the LW and NC groups were clinically acceptable. Further improvement is needed for CC group to be used clinical practice.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.49-58
• /
• 1994

To investigate the relationship between leaf growth of several woody plants and ait tempera ture in early growing season (from April to June) in deciduous forests, I surveyed the changes of leaf area (LA), leaf weight (LW) and specific leaf area (SLA) of 19 specles, in two areas Namhansansung (NA) and Taegwallyong (TA) area in which that the latitudes are similer ($37^{\circ}28'N$ at NA and $37^{\circ}27'N$ an TA), but annual mean-temperatures were different ($11.8^{\circ}C\;in\;NA, \;6.3^{\circ}C$ in TA) for two years, 1991 and 1992. In the same species, the plants of NA began to grow 10-25 days earlier than those of TA, but the latter grew faster than the former. On 10 June the values of LA and LW per leaf were similar in the two areas but the maximum values of SLA were higher in NA. In the same plant, the values of LA and LW were constant year by year, except for PYIOLUS leveilleana, Quercus mongolica, Symplocos chznensis for. pilosa and S t y a r ubussiu. In N A , the leaves be gan to grow during the first ten days of April, and eariler in 1992 than in 1991, and daily mean temperature (DMT) of the former from 27 March to 6 April were higher than those of thc latter. But the LA increased faster in 1991 than in 1992. and DMT from 10 April to 16 April were higher in 1991 than in 1992.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.513-515
• /
• 2013

휴대성이 높은 스마트폰을 활용하여 제어가 용이하지 않은 체육관이나 강당 등의 높은 곳에 설치된 블라인드를 쉽게 제어할 수 있는 방법과 원거리에서도 제어가 가능한 시스템을 설계하였다. 하드웨어 장치로는 FPGA 에 내장된 Soft-Processor 를 이용하며 WiFi 망을 통한 인터넷의 연결로 스마트폰과의 통신이 가능하다. 소프트웨어로는 RTOS 가 사용되어 통신 방식의 변화에 따른 확장성을 고려하고 lwIP 를 활용하여 스마트폰의 사용자 화면을 구성하고 제어하도록 설계하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.11-18
• /
• 2008

We created a cDNA microarray representing approximately 3,500 pig genes for functional genomic studies. The array elements were selected from 6,494 cDNA clones identified in a large-scale expressed sequence tag (EST) project. These cDNA clones came from normalized and subtracted porcine adipose tissue cDNA libraries. Sequence similarity searches of the 3,426 ESTs represented on the array using BLASTN identified 2,790 (81.4%) as putative human orthologs, with the remainder consisting of "novel" genes or highly divergent orthologs. We used the gene microarray to profile transcripts expressed by adipose tissue of fatty Chinese Xiang pig (XP) and muscley Large White (LW). Microarray analysis of RNA extracted from adipose tissue of fatty XP and muscley LW identified 81 genes that were differently expressed two fold or more. Transcriptional differences of four of these genes, adipocyte fatty acid binding protein (aP2), stearyl-CoA desaturase (SCD), sterol regulatory element binding transcription factor 1 (SREBF1) and lipoprotein lipase (LPL) were confirmed using SYBR Green quantitative RT-PCR technology. Our results showed that high expression of SCD and SREBF1 may be one of the reasons that larger fat deposits are observed in the XP. In addition, our findings also illustrate the potential power of microarrays for understanding the molecular mechanisms of porcine development, disease resistance, nutrition, fertility and production traits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.15-20
• /
• 2016

The grouting method, which can be used to effectively improve small areas within a short amount of time, may have different injection effects depending on the ground conditions and the levels of a water table. In particular, for ground with a relatively large permeability, the strength of the ground and the water proof ability can decrease over time due to the leaching process. To solve this problem, a "self-healing smart grouting (SSG) method", which was designed to maintain the initial strength of the ground by minimizing the leaching process, was developed recently. In this study, uniaxial compression tests were carried out on SSG samples to understand the strength of SSG over curing time where two different curing temperatures have been applied for comparison. The uniaxial compression strength of SSG was further compared with the samples prepared using conventional methods (LW and SGR). The test results showed that the uniaxial compression strength of SSG was higher at both high and low curing temperatures compared to that of the samples prepared using conventional methods. The initial strength of SSG was also relatively higher.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.421-431
• /
• 2009

This paper is the study on the verification of structural health monitoring (SHM) algorithm based on the ultrasonic guided wave. An active inspection system using Lamb wave (LW) for SHM was considered. The basic study about the application of this algorithm was performed for detecting the circular notch defect in steel plate. LW testing technique, pitch-catch method, was used for interpretation of circular notch defect with depth of 50% of plate thickness and 7 mm width. Damage characterization takes place by comparing $S_0$ mode sensor signals collected before and after the damage event. By subtracting the signals of both conditions from each other, a scatter signal is produced which can be used for damage localization. The continuous Gabor wavelet transform is used to attain the time between the arrivals of the scatter and sensor signals. A new practical damage monitoring algorithm, based on damage monitoring polygon and pitch-catch method, has been proposed and verified with good accuracy. The possible damage location can be estimated by the average on calculated location points and the damage extent by the standard deviation.

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.335-341
• /
• 2011

This paper searched the affect of Water dropwort and Tumeric on radiation exposure. By experimenting 50 male mouse, ICR type 5 weeks old male 25~30g, 5 mouse was divided in to each group respectively. A : 3 Gy control group, B : 5 Gy control group, C : 3 Gy, FW, D : 5 Gy FW, E : 3 Gy LW, F : 5 Gy LW, G : 3 Gy FT, H : 5 Gy FT, I : 3 Gy LT, J : 5 Gy LT FW : Ate Water dropwort before the radiation exposure. FT : Ate Tumeric before the radiation exposure. LW : Ate Water dropwort after the radiation exposure. LT : Ate Tumeric after the radiation exposure. During the 7 day radiation, Control group (A, B) received physiological saline (500mg/kg/day) in oral administration, LW and LT group (E, F, I, J) respectively received Water dropwort or tumeric (500mg/kg/day) in oral administration after the radiation, FW and FT group (C, D, G, H) respectively received Water dropwort or tumeric (500mg/kg/day) in oral administration before the radiation. As a result, an average leukocyte rate on 5 mouse was 200K/${\mu}L$ on group A. 6.46K/${\mu}L$ on group C which was in normal rate range (1.8-10.7 K/${\mu}L$). An average leukocyte rate was 23.33K/${\mu}L$ on group G. which was not normal rate, but compare to 200K/${\mu}L$, it was closer to normal rate. An average lymphocyte rate was 118.87K/${\mu}L$ on Group A. 1.51K/${\mu}L$ on Group G. which was in normal lymphocyte rate range (0.9-9.3K/${\mu}L$). An average thrombocyte rate was 4000K/${\mu}L$ on Group A. 1107 K/${\mu}L$ on Group C. 2759.6 K/${\mu}L$ on Group G. which was in normal thrombocyte rate range (592-2972 K/${\mu}L$). From this result, it was found that when exposed to radiation, Water dropwort and Tumeric have defensive effect in a preventive level. Also from an animal experiment, it was found that blood corpuscle rate returns to a normal rate. Based on this experiment, diverse research on this field should be conducted.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.819-826
• /
• 2005

To guarantee the disinfection ability in clearwell, a value of CT is considered where C[mg/l] is disinfectant residual at the exit of clearwell and T[min] means $T_{10}$, the contact time when 10% of tracer is out of clearwell after introducing the tracer at the inlet. To meet a CT value required, increasing the C value is not recommended because high C value can increase potential of producing disinfection by product like THMs. Increasing the hydraulic efficiency surrogated by $T_{10}$ is thus an option widely recommended. Right now, it is widely adopted estimating $T_{10}$ considering LW ratio only due to the suggestions of previous researches. The authors think however there are other factors to consider including shape, flow rate, configuration of inlet and outlet, and the existence of intra basin. This study is initiated to closely look at the effects of two factor on hydraulic efficiency. The factors are shape and inlet flow velocity, i.e., inflow. For that, computational fluid dynamics (CFD) model is developed and pilot test is also carried out. The results show that at a L/W ratio, disinfection ability is overestimated with larger length in shape and higher inlet flow velocity. This suggests that in determining $T_{10}$, the shapes of clearwell and inlet flow velocity should also be considered as well as L/W ratio.

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.77-86
• /
• 2003

The finite element method and statistics of the convergence measurement are useful method of the stability analysis of the tunnel adjacent to the pier. It is the purpose of the this case study to certificate of validity of the application of those methods. The safety of the pilot tunnel method and LW pre-grouting has been evaluated from the FEM analysis. The three-dimensional finite element method is carried out for the decision of the level of stress redistribution at the two-dimensional numerical analysis. An analysis of the convergence is carried out by the estimation of preceding convergence at tunnel excavation. F-examination is applied for this estimation. As results of that analysis, The F-value is from 10.81 to 158.74 and the coefficient of determination is from 0.82 to 0.99. An analysis of convergence is carried out by using regression analysis. Consequently, it is shown that the convergence can be modeled as following function C(t)=a[1-exp(-bt)].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5559-5564
• /
• 2015

A variety of routing protocols targeted specifically at mobile ad-hoc network environments have been developed. Mobile ad-hoc network is a self-organizing temporary network, operating without the aid of any established wired infrastructure. The proposed protocol supports seamless communication services between the mobile hosts within a mobile ad-hoc network environments. In particular, our protocol makes faster route re-establishment possible by maintaining multiple paths in each mobile host, and also, the protocol provides reliable communication environments. We compare the performance of RWP model with that of LW model. This paper shows delivery ratio with single path and non-disjoint multiple path according to mobility model and node numbers.