• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.812-817
• /
• 2016

본 논문은 함정용 LED 조명기구의 전기적, 광학적 요구사항을 제시하고 실증으로 요구사항 만족여부를 확인하였으며, 2012년 함정에 최초 적용된 이후 현재까지 비용 효과를 분석하였다. 함정용 LED 조명기구의 요구사항을 도출하기 위하여 한국산업규격(KS), 국방규격(KDS) 및 미 해군규격(MIL)의 요구사항을 비교하여 함정용 LED 조명기구의 요구사항을 제시하였다. 형광등기구와 LED 조명기구의 전기적 특성과 광학적 특성을 실험으로 분석하여 요구사항 적용 타당성을 검증하였고, 제시된 함정용 LED 조명기구의 요구사항으로 A1함정에 주 조명등으로 설치되었다. LED 조명기구로 설치된 이후 형광등에 비해 소비전력은 약 40% 감소되었고, 광속은 10 ~ 15% 증가하였다. 또한, 2012년에서 2015년까지 함정 10척에서 약 4,900개의 형광등기구가 감소되는 효과가 있었고, 약 5.6억원의 절감효과를 확인하였다. 향후 지속적으로 함정에 LED 조명기구를 설치하고 있어 많은 절감효과가 기대된다.

• 한국결정성장학회지
• /
• 제25권4호
• /
• pp.166-171
• /
• 2015

본 연구에서는 고상법 및 flux를 이용하여 $Y_3Al_5O_{12}:Er^{3+}\;(YAG:Er^{3+})$ 분말을 저온에서 성공적으로 합성하였다. 분말의 합성 여부와 분말 하소 시 온도에 따른 결정성을 분석하기 위하여 X-ray diffraction(XRD)를 측정하였다. 순수한 YAG는 일반적인 고상법으로 합성할 경우, $1400^{\circ}C$에서 12시간 동안 하소하여 순수한 YAG 상을 얻을 수 있었고, 반면에 $BaF_2$를 첨가한 결과는 상대적으로 낮은 온도($1000^{\circ}C$)에서 합성되었다. 즉, 합성온도를 약 $400^{\circ}C$ 가량 낮출 수 있는 것으로 나타났다. 또한, $BaF_2$의 최적의 농도를 찾아 첨가 후, 열처리 온도에 따라 $BaF_2$로 인한 입자의 형태 및 크기를 조사하였으며 그에 따른 발광강도에 대하여 논의하였다.

• 천문학회보
• /
• 제42권1호
• /
• pp.28.1-28.1
• /
• 2017

To investigate AGN outflows as a tracer of AGN feedback on the host galaxies, we perform integral-field spectroscopy of 20 type 2 AGNs at z<0.1 using the Magellan/IMACS and the VLT/VIMOS. The observed objects are luminous AGNs with the [O III] luminosity >$10^{41.5}erg/s$, and exhibit strong outflow signatures in the [O III] kinematics. We obtain the maps of the narrow and broad components of [O III] and $H{\alpha}$ lines by decomposing the emission-line profile. The broad components in both [O III] and $H{\alpha}$ represent the non-gravitational kinematics, (i.e., gas outflows), while the narrow components represent the gravitational kinematics (i.e., rotational disks), especially in $H{\alpha}$. By using the spatially integrated spectra within the flux-weighted size of the narrow-line region, we estimate the outflow energetics. The ionized gas mass is $(1.0-38.5){\times}10^5M_{\odot}$, and the mean mass outflow rate is $4.6{\pm}4.3M_{\odot}/yr$, which is a factor of ~260 higher than the mean mass accretion rate $0.02{\pm}0.01M_{\odot}/yr$. The mean energy injection rate is $0.8{\pm}0.6%$ of the AGN bolometric luminosity Lbol, while the mean momentum flux is $(5.4{\pm}3.6){\times}L_{bol}/c$, except for two most kinematically energetic AGNs. The estimated energetics are consistent with the expectations for energy-conserving outflows from AGNs, yet we do not find any supporting evidence of instantaneous star-formation quenching due to the outflows.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.65-69
• /
• 2009

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of electrodeless lamp are related to ferrite core and cold spot temperature.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2007

본 연구는 실내로 유입되는 주광을 조광제어시스템의 적용에 효율적으로 활용하여 초과한 인공조명의 광량을 줄임으로써 에너지 절약의 효과를 높이고자 함이다. 광센서는 탐지된 광속량을 신호로 보내고 그에 알맞은 제어신호를 받아 조광율을 결정하는데, 일반적으로 사무공간에서 인공조명의 개수나 행수만큼 광센서가 설치가 되어 조명기구의 각 구역마다 다른 조광율로 조광제어를 하는 것이 인공조명 제어측면에서는 효율적이나, 시스템 설치비용측면에서는 비효율적이다. 그러므로 실험과 시뮬레이션을 통하여 미리 유입되는 주광 분포를 파악하고 조광율을 분석한다면, 하나의 광센서 설치로써 인공조명 구역간의 각기 다른 조광율로 제어가능하다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.157-159
• /
• 2007

광속구에서 광원(light source)의 광속(luminous flux)을 측정할 때, 통상적인 측정환경의 변화는 보조램프(aux. lamp)를 사용하여 그 차이를 보정할 수 있다. 그러나 PLS(plasma lighting system)와 같이 표준광원과 시료광원의 위치가 크게 다를 경우에는 그에 따른 광속변화를 직접 측정하고 보정계수를 산출 반영하거나 시료광원의 측정위치와 동일한 위치에서 Calibration을 시행해야 할 것이다. 따라서 본 논문에서는 광속구에서의 기존 광원의 광학적 특성치를 통하여 새롭게 개발되는 광원류에 대한 부 표준램프를 제작 실험한 결과를 제시한 것이다. 광속구에서의 광특성은 센터와 사이드 측정방식에 의한 특성결과치를 기준으로 보정계수를 구하고 부 표준램프를 제작하였다.

• 한국태양에너지학회 논문집
• /
• 제24권2호
• /
• pp.39-50
• /
• 2004

One of the challenge for successful daylighting design might be to capture sunlighting that varies in both intensity and position and to deliver the luminous flux into the inner space as deep as possible. Conventional glazing apertures allow daylight in the outer 3.5m of a perimeter spaces. More advanced daylighting technologies can extend this daylighting depth by reflecting sunlight further from the windows within a deep floor area. For this purpose, this study developed light shelves based on performance evaluation with a mock-up model that constructed recently and measured under real sky condition. All these daylighting devices have a customized geometry developed from the solar path at a given latitude and utilize unique reflecting finishing to maximize the amount of redirection and diffusion of the daylight. This paper tells that the best daylighting penetration typically can be expected from using light-colored sloped external shelves.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.833-838
• /
• 2008

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of elecrodeless lamp are related to ferrite core and cold spot temperature. Additionally, spectrum, color temperature and coordination are measured to check that is relation with ambient temperature.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.47-52
• /
• 2013

The problems of light pollution first became an issue in the 1970s when astronomers identified the degradation of the night sky due to the increase in lighting associated with development and growth. As more impacts to the environment by lighting have been identified, many attempts have been made for reducing light pollutions. To prevent light pollution and increase energy efficiency, Seoul Metropolitan Government(SMG) replaced metal halide road lighting to LED luminaire in four arterial highway in Seoul. The present study compared the lighting characteristics of metal halide and LED luminaire in terms of Korea Standard for road lighting(KS A 3701) and BUG rating from Illuminating Engineering Society of North America(IESNA). The results showed that LED luminaire increased road surface luminance up to 2 times in average compared to the metal halide environment. Also, LED luminaire reduced the glare value by 2 times and luminous flux over 50% than the metal halide luminaire. In comparison with the BUG ratings, LED luminaire rated 1 degree lower for the backlight ratings and 3-4 degrees lower for the uplight ratings. The measured values testified that the LED luminaire is effective for roadway lighting and light pollution reduction.