• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1317-1320
• /
• 2006

This study compared the floor impact sound level of rectangular receiving room type to differed receiving room types to analyze effect of room mode. The floor impact sound level of master room were higher than the level of living room which resulted from room mode. The result showed that the level of low frequency bandwidth in the location varied with receiving room types were lower than general measuring point of rectangular receiving room.

• Steel and Composite Structures
• /
• v.13 no.2
• /
• pp.171-185
• /
• 2012

The calculation of fire resistance for a composite structural element comprises the calculation of the temperature within its cross-section and of the load bearing capacity, considering the evolution of the steel and concrete mechanical properties, function of the temperature. The paper proposes a method to calculate the bending capacity under ISO fire, for Slim Floor systems using asymmetric steel beams, with a wider lower flange or a narrow upper flange welded onto a half hot-rolled profile. The temperatures in the cross-section are evaluated by means of empirical formulas determined through a parametrical analysis, performed with the special purpose non-linear finite element program SAFIR. Considering these formulas, the bending capacity may be calculated, using an analytical approach to determine the plastic bending moment, for different fire resistance demands. The results obtained with this simplified method are validated through numerical analysis.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.17 no.3
• /
• pp.1-12
• /
• 2021

In this study, the effects of various operational conditions for floor radiant heating system were researched by experiments. Hot water supply set temperature, indoor air set temperature and supply water flowrate were considered as operational conditions. The control method for this system is On-Off control of automatic thermostatic valve. The purpose of this study is to evaluate indoor thermal control characteristics and energy performance, respectively. As a result, if lower supply water temperature is applied, the supply and return temperature difference is reduced and energy consumption of heat supply is also reduced.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.29-34
• /
• 2012

To examine possibilities to make use of woodceramics for the lower material of hot-floored ondol boards, woodceramics made from sawdust board with Pinus densiflora, put them in a wood frame and concrete block and heated them sending an electric current, and measured changes in surface temperature of a laminated floor board and a plywood floor board. As the sending an electric current to time passed, their surface temperature increased rapidly up to 20 minutes, and then gradually ascended. In terms of the surface temperature in the wood frame, the beginning temperature of a plywood floor board was higher than that of laminated floor one; however, as time passed, a laminated floor board's temperature rose, and after 60 minutes, it showed similar to the temperature of a floor board of lamination. On the other hand, the surface temperature in a concrete block showed that the laminated floor board was higher than the plywood floor board in both early and 60-minute later temperatures. With the lapse of time after switching off, the surface temperature of floor boards slowly dwindled up to 9 minutes, and from that time on, began to drop sharply. In terms of the descent speed of surface temperature, when woodceramics' surface temperature was adjusted at $70^{\circ}C$, the laminated floor board was the highest; when it was at $80^{\circ}C$, the plywood floor board was the highest, resulting in rapid descent speed of heat.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.243-248
• /
• 2014

PURPOSE: This study was aim to the change of muscle activities of lower extremity and waist during lifting a small object on the floor according to different foot position of women in their twenties wearing a skirt. METHODS: 9 women in their twenties wearing a skirt were selected and were measured the muscle activities of medial gastrocnemius (MG), tibialis anterior (TA), vastus lateralis (VL) and iliocostalis (IC) when they lifted a small object on the floor. The two different foot position employed were "both feet posed straight side by side" (condition 1) and "both feet posed diagonally to 45 degree" (condition 2) used. The order of feet position was selected randomly and the subject took a rest for 30 min between tests to prevent muscle fatigue. We calculated the mean and standard deviation of muscle activities and used Mann-Whitney U test to compare the difference between the two foot positions with SPSS(IBM Korea) RESULTS: The muscle activity of condition 2 was greater than that of condition 1 in right side of TA, VL, and IC and left side of TA, VL, MG and IC. The right side of TA, VL and left side VL were significant difference between condition 1 and condition 2(p<.05). CONCLUSION: We suggest "both feet posed straight side by side" position is better if a woman wearing a skirt lift the small object and it will help prevent the low back and lower limb problems in the future.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.7
• /
• pp.335-342
• /
• 2014

The big issue in fire and life safety protection in atriums is that hot smoke can spread vertically via the atrium openings, and impact atrium floors remote from the fire. Three different strategies to provide fire and life safety protection for atrium space were evaluated in this study, using the FDS model. Strategy A is the atrium protection approach addressed in the Korean Building Fire Protection Code, where atria are required to be enclosed with fire shutters from the $2^{nd}$ floor to the atrium top, and the ground floor is allowed to open to the atrium; in this case, no smoke control is required. Strategy B is the atrium protection approach, with smoke control provided in accordance with NFPA 92B; in this case, no atrium floor is enclosed. Strategy C is the atrium protection approach, in which some of the upper atrium floors are enclosed (the case of the top atrium floor being enclosed is evaluated in this study), and atrium smoke control is also provided to protect the lower atrium floors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.308-311
• /
• 2004

It is reported that there is a limit in increasing heavy-weight impact noise isolation performance of the load bearing wall system apartments to meet the regulation of the Ministry of Construction and Transportation (MOCT). To increase the heavy-weight impact noise isolation performance, improvement in structural systems such as increasing concrete slab thickness and application of rahmen structure were proposed. In this study floor impact sound levels from toil apartments with two rahmen structure multi-story residential buildings were measured before the construction of the buildings finished. Measurements were made at living room and two bedrooms at each apartment when the finishing processes were finished. The average value of light-weight impact sound level from ten apartments was 56dB (L'$\sub$n,Aw/). The heavy-weight impact sound level was 44dB (L'$\sub$i.Fmax.Aw/) and the impact sound level of the impact ball was 41dB(L'$\sub$i.Fmax.Aw/), As a result floor impact noises at the rahmen structure system were lower than the regulation level.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.141-148
• /
• 2013

This study was conducted to evaluate the effect of different housing systems on the performances of sows and their piglets during gestation. A total of 90 sows (Landrace ${\times}$ Yorkshire) were employed into 3 experimental farms to give 3 treatments, stall housing, group housing in either slatted floor or litter floor. Individual sow was used as an experimental unit. Group housed sows were fed with electronic sow feeder during gestation. Performance measures were taken on sows and piglets. Back-fat thickness and body condition score of sows were not affected by housing systems for pregnant sows. There was no difference of estrus interval of pregnant sows between housing systems. The lower number of still-birth was observed in group housing type. The number of wounded sows in slatted floor was remarkably increased compared with sows in litter floor. This study showed that the housing systems could fairly impact sow and piglet performances.

• The Korean Journal of Pain
• /
• v.7 no.1
• /
• pp.92-95
• /
• 1994

Most neoplasm of the floor of the mouth are squamous cell carcinoma. They originate from anterior midline floor of the mouth and penetrate into the sublingual gland. Invasion of the mandible is a late manifestation. Lymphatic spread is the submaxillary and subdigastric nodes and advanced lesions of them produce severe pain, The initial step in managing patients with cancer pain is the oncology therapy in the form of radiotherapy, surgery, or chemotherapy, alone or combined. When oncologic therapy is ineffective, the pain must be treated by systemic analgesic, psychologic, neurostimulating, regional analgesic,and meuroablative techniques. We successfully treated with gasserian ganglion block on the left side and mandibular nerve block on the right side with pure alcohol in the patient having severe submandibular, lower lip and tongue pain.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.4
• /
• pp.175-184
• /
• 2019

To improve productivity in the architecture, construction and engineering industry, it is critical to understand both current and historic trends in construction productivity. This study analyzes and compares construction productivity trends of South Korea, the U.S., the U.K., and Japan 1995 to 2015 using the following three measures: construction labor productivity, construction duration per floor, and construction duration per 1,000 m2 floor area. As the results, the international competitiveness of each country varied according to which measures were used to analyze them. Among the four countries, the construction labor productivity of the U.S. was the highest, followed by that of South Korea. South Korea also had the second highest productivity growth rate, following that of Japan. On the other hand, when analyzed from the perspective of construction duration, the construction productivity in South Korea appeared relatively lower than those of other countries. There were differences in the location of construction competitiveness of each country analyzed by various measures. Therefore, to accurately diagnose and improve the construction competitiveness in South Korea, strategies based on various measures are need to established simultaneously.