• Journal of Korean Society for Quality Management
• /
• v.23 no.3
• /
• pp.20-32
• /
• 1995

This paper is concerned with the economic selection of both the lower limit and the process mean for a continuous production process. Consider a production process where items are produced continuously. All of the items are subject to acceptance inspection. The items for which the measured values of the quality characteristic are larger than the lower limit are accepted, and those smaller than the lower limit are rejected and excluded from shipment. The process mean may be set higher to reduce the costs incurred by imperfect quality. Using a higher process mean, however, results in a higher production cost when production cost is an increasing function of the quality characteristic. Assuming that the quality characteristic is normally distributed with known variability, cost models are constructed which involve production cost, cost incurred by imperfect quality, rejection cost, and inspection cost. Methods of finding optimal values of the lower limit and the process mean are presented and numerical examples are given.

• Journal of the Korean Society of Safety
• /
• v.15 no.3
• /
• pp.71-77
• /
• 2000

The aim of this study is to investigate the temperature dependence of the lower explosive limit(LEL) at elevated temperature. The temperature dependence of the lower explosive limit is one of the significant indices of flammability and combustibility. By using the literature data, the new equations for predicting the temperature dependence of the lower explosive limits for paraffinic hydrocarbons are proposed. The values calculated by the proposed equations were a good agreement with the literature data. It is hoped eventually that this proposed equations will support the use of the prediction for the lower explosive limit and the flash points of the flammable mixtures.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.239-246
• /
• 2003

Individual items are produced continuously from an industrial process. Each item is checked to determine whether it satisfies a lower screening limit for the quality characteristic which is the weight of an expensive ingredient. If it does, it is sold at a regular price; if it does not, it is reprocessed or sold at a reduced price. The process mean may be adjusted to a higher value in order to reduce the proportion of the nonconforming items. Using a higher process mean, however, may result in a higher production cost. In this paper, the optimal process mean and lower screening limit are determined in situations where the probability that an item functions well is given by a logistic function of the quality characteristic. Profit models are constructed which involve four price/cost components; selling prices, cost from an accepted nonconforming item, and reprocessing and inspection costs. Methods of finding the optimal process mean and lower screening limit are presented and numerical examples are given.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.42-47
• /
• 2016

The combustible properties(flash point, explosion limit and autoignition temperature) are the important safety items which are considered in the typical MSDS(material safety data sheet). In this study, for the safe handling of n-butyl methacrylate(n-BMA) being used in various ways in the chemical industry, the flash point and the autoignition temperature(AIT) of n-butyl methacrylate was experimented. And, the lower explosion limit of n-butyl methacrylate was calculated by using the lower flash point obtained in the experiment. The flash points of n-butyl methacrylate by using the Setaflash and Pensky-Martens closed-cup testers measured $44^{\circ}C$ and $51^{\circ}C$, respectively. The flash points of n-butyl methacrylate by using the Tag and Cleveland open cup testers are measured $53^{\circ}C$. The AIT of n-butyl methacrylate by ASTM 659E tester was measured as $295^{\circ}C$. The lower explosion limit by the measured flash point $44^{\circ}C$ was calculated as 0.85 vol.%. It was possible to predict lower explosion limit by using the experimental flash point or flash point in the literature.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.547-552
• /
• 2002

The purpose of this study is to propose indoor noise level in residential buildings affected by transportation noise (road traffic, railway and air-craft noise) based on subjective evaluations, 30 subjects participated in the experiment to evaluate the noise. Experimental environment reproduced real living and office environment, and in asking subjects' annoyance to the noise. An experiment to investigate the subjective responses to various computer noises (CD-Rom, HDD, Fan) in office environment was also undertaken. The Result shows that the lower limit of transportation noise is $40{\sim}41dB(A)$ and upper limit is $55{\sim}60dB(A)$, whereas the lower limit of various computer noises is $36{\sim}40dB(A)$ and upper limit is $45{\sim}52dB(A)$.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.109-114
• /
• 2001

Explosive characteristics of the city gas were determined by using the gas explosion apparatues. The explosive range is determined between lower explosive limit of 5.0% and upper explosive limit of 15.3% at atmosphere and even though the oxygen concentration is decreased, lower explosive limit is not changed, but upper explosive limit is rapidly decreased. The minimum oxygen for combustion is determined 10%. The maximum explosion pressure is determined 5.72$\textrm{cm}^2$ and the maximum rate of explosion pressure rise is oxygen concentration of 12% to determined 160.12$\textrm{cm}^2{\cdot}$sec.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.203-210
• /
• 2022

Purpose : The purpose of this study was to investigate the effect of vestibular sensory stimulation exercise on the limit of stability, dynamic weight shift, and upper and lower extremities reaction time in adult women. Methods : This study was conducted with 30 female. All subjects were randomly and equally assigned to an experimental group and a control group of 15 each. Subjects assigned to the experimental group received vestibular sensory stimulation training for 6 weeks. For the intervention, vestibular sensory stimulation exercises were conducted by referring to the Hamid exercise method and the Cawthorne-Cooksey exercise method, and the control group did not receive any intervention. All subjects were tested for limit of stability, dynamic weight shift, and upper and lower extremities reaction time before and after the intervention. Results : The results of this study showed significant differences between groups in reaction time, moving velocity, and directional control in the limit of stability test after intervention. In the dynamic weight shift test after intervention, there was a significant difference between the groups in the slow directional control of left and right. And in the upper and lower extremities reaction time test after intervention, both scores and reaction time showed significant differences between groups. Conclusion : As a result, the three vestibular sensory stimulation exercises applied in this study improved the limit of stability, dynamic weight shift, and upper and lower extremities reaction time.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.3 no.1
• /
• pp.68-80
• /
• 1996

Long-term hemodialysis(HD) patients manifest various signs of protein and caloric malutrition due to poor intake of nutrients and other causes. Poor nutritional status increases the mortality and morbidity rates in HD patients. Thus, mataintnance of adequate nutritional status has been a major task in taking care of patients receiving HD. This study was to evaluate the nutritional status of HD patients and to clarify the degree of nutritional deficit based on usual dietary intake, anthropometric and biochemical indicators. Sixty HD patients comprised a HD group, while the control group consisted of 60 healthy adults whose age and sex matched those of the HD group. Nutritional status was evaluated by dietrary intake using instant nutritional scale, anthropometric measures, serum protein concentrations and the number of lymphocytes. The data were analyzed by using Chi-square test and unpaired t-test. The results are as follows. 1. Regarding usual dietary intake of HD group. 1) Estimated caloric intake was significantly lower than the recommended daily allowance(RDA) and among them, 35% were taking calories less than 85% of the RDA. 2) Estimated protein intake was significantly higher than the RDA and among them 40% were taking protein more than 115% of the RDA. 3) Estimated fat intake was lower than the RDA. 4) Vitamin A, B, $B_1,\;B_2$, C and niacin in take was lower than the RDA respectively. 5) Estimated ferrous intake was within the normal limit the RDA while estimated calcium intake was higher than the RDA. 6) Both calorie and protein intake were higher for the 10 patients who had been under continuous ambulatory peritoneal dialysis than for the patients under HD from the beginning. 2. Regarding anthropometric measures : 1) Body mass index(BMI), midarm circumference(MAC), and triceps skinfold thickness(TSF) were lower in the HD group than in the control group. 2) Among HD group, 47.1% were within the normal limit of BMI, while 86.7% were within the same limit in the control group. 3) Among HD group, 35.0% were within the normal limit of MAC, while 83.3% were within the same limit in the control group. 4) Among HD group, only 8.3% were normal, 30.3% were mild deficit status of TSF, while 50% were normal and 48.3% were mild deficit status in the control group. 3. Regarding biochemical laboratory tests 1) Albumin, transferrin concentrations and the number of lymphocytes were lower in HD group than in the control group. 2) Among HD group, 98.3% were within the normal limit of albumin concentration and all were within the same limit in the control group. 3) Among HD group, only 11.7% were within the normal limit of transferrin concentration, while 81.7% were within the same limit in the control group. 4) Among HD group, 25% were within the normal limit, while 93.3% were within the same limit in the control group. The above findings suggest that HD patients were in nutritional deficit status. Adequate diet therapy and periodical evaluation of the nutritional status in HD patients are needed. Accordingly, it turned out that anthropometric measures were very reliable parameters and easy to use to evaluate nutritional status. So nurses are encouraged to adopt anthropometric measures to examine nutritional deficit status of HD patients.

• Korean Journal of Childcare and Education
• /
• v.16 no.1
• /
• pp.75-98
• /
• 2020

Objective: This study aimed to examine the influences of household chaos on self-control of young children and to investigate whether teachers' limit-setting styles had moderating effects. Methods: The participants were 184 children (83 boys and 101 girls), at age 3 -5, their mothers and teachers working at daycare centers located in Seoul and Gyeonggi-do. The data were analyzed by descriptive statistics, Pearson's correlation, and hierarchical regression. Moderating effects were examined using the Mplus8.0 program. Results: The results indicated that household chaos as well as teacher's permissive and logical limit-setting styles had significant effects on self-control of preschoolers. The lower the level of household chaos was, the higher the level of self-control of preschoolers was. The level of self-control was more likely to be high when teachers used logical limit-setting with detailed explanation to children whereas it was lower when they used more permissive limit-setting. In addition, teachers' logical limit-setting moderated the relation between household chaos and self-control of preschoolers. That is, the effects of household chaos on preschoolers' self-control were mitigated when the level of logical limit-setting was high compared to when it was low. Conclusion/Implications: The results suggested that both household chaos and teachers' limit-setting styles play important roles in increasing self-control of preschoolers.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.93-103
• /
• 1997

This study presents a way of improving the stability of fixed scroll in scroll compressors. For the scroll compressor whose fixed scroll is designed to move in the axial direction for the axial compliance, the fixed scroll is under the influence of the overturning moment produced by internal gas forces. Unless the overturning moment is properly compensated by the moments of reaction forces at the suspension of the fixed scroll to the compressor frame, the fixed scroll would exhibit wobbling motion, increasing gas leakage through the gap induced by the wobbling of the fixed scroll between the two scroll members. The conditions on which the wobbling motion can be suppressed have been found analytically; The axial position of the fixed scroll suspension should be made within a certain range. The upper limit of this range is the axial location for the o-rings which are inserted between the fixed scroll and the back pressure chamber to promote sealing for the gas in the back pressure chamber. And the lower limit is mainly determined by the magnitude of the axial sealing force. As long as the axial sealing force is not negative over all crank angles, the lower limit is not above the mid-height of the scroll wrap. Larger axial sealing force lower the lower limit.